Eight
sockets for PC2-5300 Fully Buffered DIMMs (DDR2-667)
1.
Torx
service tool
2.
Hot-plug
fans, full redundancy
2.
Optional
pass through cable door
3.
Systems
Insight Display
3.
Two
Embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine
4.
Quick
release lever for rapid server access
5.
Support
for eight Small Form Factor hot plug hard drives bays
4.
Hot
plug power supply bays, redundancy option (High performance models include redundant
power supply)
6.
Front
LEDs (show server status) and Unit Identification button/LED (for easy in rack
server identification)
5.
Integrated
Lights-Out 2 (iLO 2) Remote management port
6.
Video
Port
7.
Two
front USB ports (2 rear USB ports, 1 internal USB port)
7.
Two
USB 2.0 Ports
8.
Intel
Xeon Processor (Performance models include two processors)
8.
Serial
Port
9.
Keyboard
Port
9.
Hot
plug power supply, redundancy option (High performance models include redundant
power supply)
10.
Mouse
PS/2 Port
10.
Three
full-size PCI-E expansion slots in standard expansion cage (or optional mixed
PCI-X/E expansion cage). Two additional low-profile PCI-E slots embedded on the
system board. Four slots available for use; one consumed by Smart Array controller
(Base and Performance models)
11.
Two
low-profile PCI Express x8 slots. Slot 1 is consumed by the P400 Smart Array controller.
(Base and Performance models)
12.
Three
full-size PCI Express slots in standard cage (or optional mixed PCI-X/E expansion
cage)
11.
Quick
removal access panel
What's
New
New Intel®
Xeon® X5270 Dual-Core processor
At A Glance The HP ProLiant DL380, the world's best selling server,
delivers on its history of design excellence with enterprise-class uptime
and manageability, proven 2-socket Intel® Xeon® performance, and
2U density for a variety of rack deployments and applications.
Processors:
Quad-Core and Dual-Core Intel® Xeon® processors for blazing
performance; systems support up to 2 processors (2 processors standard
on all Performance models)
Preconfigured Performance models save valuable deployment time
at a discounted bundle price
Intel® 5000P chipset
Memory:
Up to 64 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1
and 2:1 interleaving available, online spare and mirrored memory
capabilities
Storage Controller:
Performance Models: HP Smart Array P400/512MB BBWC Controller
(RAID 0/1/1+0/5/6)
High Efficiency and Base Models: HP Smart Array P400/256MB Controller
(RAID 0/1/1+0/5)
Entry Models: HP Smart Array E200/64MB Controller (RAID 0/1/1+0)
Internal Drive Support:
(8) small form factor (SFF) hot-plug drive bays to support Serial-attached
SCSI (SAS) and Serial ATA (SATA) drives
Slimline media bay supporting Optical or Floppy drive
Network Controller:
Two embedded NC373i Multifunction Gigabit Network Adapters with
TCP/IP Offload Engine, including support for Accelerated iSCSI through
an optional Licensing Kit
Expansion Slots:
Four available PCI-Express slots, optional mixed PCI-X / PCI-Express
configurations available (see "Standard Features -Expansion
Slots" section below for more details)
USB Ports:
USB 2.0 support
5 total ports: (2) ports up front; (2) ports
in back; (1) port internal
Redundancy:
Fully redundant hot plug fans (N+1)
Hot plug power supply with optional redundancy (Included in Performance
models)
Infrastructure Management:
Convenient slide-out Systems Insight Display for quick and easy
front view server diagnostics, along with status LEDs, Automatic
Server Recovery (ASR), ROM Based Setup Utility (RBSU)
HP ProLiant Onboard Administrator (powered by the HP Integrated
Lights-Out 2 management processor) for simplified server setup,
health monitoring and recovery, power and thermal control, and lights-out
remote administration.
HP Insight Control a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, control and optimize your IT infrastructure
through a single, simple management console. Insight Control supports
both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. This
ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
Form Factor:
Rack (2U), (3.5-inch); Depth 26 inches
(66 cm)
Operating Systems and Virtualization Software
Support for ProLiant Servers:
Supports Windows, RHEL, SLES, OEL, Solaris,
NetWare, VMware, and HP Citrix Essentials for XenServer
Deployment/Serviceability:
System Insight Display on the front bezel for quick and easy
server diagnostics
Quick Deploy Rail System includes sliding universal rails, an
ambidextrous cable management arm and quick release levers for fast
and easy serviceability
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many
CSR parts to minimize repair time and allow for greater flexibility
in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel
Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services
or customized service agreements. Hard drives have either a one
year or three year warranty; refer to the specific hard drive QuickSpecs
for details. NOTE: Server Warranty includes
3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business
day response. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for
easy replacement but may involve added complexity. Customers may
choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support
is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
NOTE: Up to
2 processors (8 cores) supported. Performance configurations include two
processors. Mixing different processor models is not supported. NOTE: Future upgradeable to Xeon® Series 5400/5300 Quad-Core
processors (Please contact your regional sales support to determine quad
core upgradeability. Some of the earlier shipping models may not support
this upgrade). 5100 Dual-Core models are not upgradeable to the 5200 Dual-Core
processors.
Cache
Memory One of the following depending on Model
PC2-5300
Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available (interleaving
requires identical DIMMs)
Standard (Entry Models)
1
GB (2 x 512 MB)
Standard (Base Models)
2
GB (2 x 1 GB)
Standard
(Performance Models)
4
GB (4 x 1 GB)
Maximum
64 GB (8 x 8 GB)
NOTE:
Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will
run at 667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory
DIMMs will run at 533 MHz.
Network Controller
Two embedded NC373i Multifunction
Gigabit Network Adapters with TCP/IP Offload Engine, including support for
Accelerated iSCSI through an optional Licensing Kit
Expansion
Slots
Embedded
Slots
Expansion
Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
PCIe
X4
X8
6
Half length, low profile slot, embedded
Performance / Base models: Reserved slot for Smart Array
P400 Controller
2
PCIe
X4
X8
11
Half length, low profile slot, embedded
N/A
*
Default bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number ** Indicates the number of physical electrical
lanes running to the connector.
*
Default bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number ** Indicates the number of physical electrical
lanes running to the connector.
PCIe/PCI-X
Riser (Optional)
Expansion
Slots #
Technology
Bus Width***
Connector Width
Bus Number*
Device No.**
Form Factor
3
PCIe
X8
X16
23
0
Full length, full height slot
4
PCI-X (133MHz, 3.3 Volt)
64-bit
Not applicable
18
1
Full length, full height slot
5
PCI-X (133MHz, 3.3 Volt)
64-bit
Not applicable
18
2
Full length, full height slot
*
Default bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number. ** Slots are enumerated differently based
on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with
the lowest bus). *** Indicates the number of physical electrical lanes running
to a PCI-e connector.
Storage Controller One of the following depending on Model
Performance Models:
HP Smart Array P400/512MB BBWC
Controller (RAID 0/1/1+0/5/6)
High Efficiency and Base Models:
HP Smart Array P400/256MB Controller
(RAID 0/1/1+0/5) Available upgrades: 512MB battery-backed write cache (BBWC) or standalone
battery for RAID 0/1/1+0/5/6
Entry Models:
HP Smart Array E200/64MB Controller
(RAID 0/1/1+0) Available upgrades: 128MB battery-backed write cache (BBWC) for RAID
0/1/1+0/5
Storage
Diskette
Drive
None Standard
Optical Drive One of the following depending on Model
None Standard
IDE DVD-ROM/CDRW Combo included
on Performance models
Hard Drives
None Standard
Maximum
Internal Storage
Hot Plug SAS
4.0TB
8 x 500GB with standard internal
hot plug SFF SAS drive cage
Hot
Plug
2.0TB
8
x 250GB
Intelligent Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Hot Spare Boot NOTE: Upon the event of a failed
processor in a multi-processing environment, the system will automatically
reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out
2 management processor) simplifies server setup, health monitoring, power
and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without
additional software, and can be accessed from any location via a web browser.
It works hand-in-hand with HP Systems Insight Manager, Insight Control
suites, and the Insight Dynamics for ProLiant helping customers unlock
the value of the ProLiant platform and deliver the highest possible quality
of IT service to the business. See www.hp.com/go/ProLiantOA
HP Insight Control
HP Insight Control,
a product option, delivers essential infrastructure management that can
help save time and money by making it easy to deploy, migrate, monitor,
remote control, and optimize your IT infrastructure through a single, simple
management console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP Insight
Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant
HP Insight Dynamics for ProLiant, a product
option, is an integrated command center that enables IT Staff personnel
to continuously analyze and optimize a converged infrastructure, while automating
and reducing the cost of common data center tasks by as much as 40 percent.
As a powerfully integrated by design toolkit to accelerate complex technology
projects and simplify daily operations that ultimately enable IT Staff personnel
to dynamically keep pace with the organizations changing business requirements.
It enables them to plan capacity and power continuously, balance across
physical and virtual resources, and ensure cost-effective high availability.
It also enables IT organizations to provision infrastructure consistently
and automatically from pools of shared resources using a self-service portal.
Resources provisioned can range from a single virtual machine to complex
multi-tier environments and their associated physical and virtual resource
requirements. In addition to the previous functional benefits, it also provides
a cost-effective disaster recovery for physical and virtual environments
that works with HP StorageWorks Continuous Access software for both the
Enterprise Virtual Array and the XP storage array allowing application environments
to be reactivated in minutes with the touch of a button to a remote location.
ACPI 2.0
Compliant PCI 2.2 Compliant WOL Support Microsoft® Logo certifications
USB 2.0 Support
Security
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
Server
Power Cords
An IEC13 to IEC14
jumper cord ships standard with all part numbers if connecting to a UPS or PDU.
If a localized cable is desired or required, it needs to be purchased.
UPS
and PDU Power Cord Matrix
Please see the UPS and PDU cable
matrix's on the HP Power Protection and Management page. Under Power Cords,
click on the "HP Power Cord Matrix" link. That link will list
cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
Power Supply
800Watt, CE Mark Compliant
Optional Hot Plug AC Redundant Power Supply
Optional 48 Volt DC Power Supply Kit (Factory integration not available)
System Fans
Fully redundant hot plug fans
ship standard (N+1)
Operating
Systems and Virtualization Software Support for ProLiant Servers
NOTE: For more information on HP's Certified and Supported ProLiant
Servers for OS and Virtualization Software and latest listing of software
drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
and our driver download page www.hp.com/support/DL380G5.
Rack Airflow Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION:If a third-party rack is used,
observe the following additional requirements to ensure adequate airflow
and to prevent damage to the equipment:
Front and rear doors: If your 42U server
rack includes closing front and rear doors, you must allow 830 square
inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open
area for ventilation).
Side: The clearance between the installed
rack component and the side panels of the rack must be a minimum of
2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE: For additional
information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the
Support section at the following URL: www.hp.com/servers/dl380.
Rack
Kit
Quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and
HP series), with an adjustment range of 24" - 36". The ambidextrous
cable management arm can be mounted on either the left or right side for
improved cable management.
NOTE: Cable management arm must be removed to access hot-plug power
supplies when the cable management arm is mounted on the right.
Telco Rack Support
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions at: http://www.hp.com/go/rackandpower/
Factory
Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure-Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance. http://www.hp.com/products/configurator.
Service and Support
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server and purchased at the same time or afterward that
are internal to the enclosure. This also includes the 22" and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included, and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions, provides a range of support services designed
to meet the varying needs of your business. Whether an SMB, or large global
corporation, HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - simplify ProLiant solution implementation,
maintenance, and management.
Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage
only
Deployment Service: Installation and Start up only
Enhanced Service - optimize service level to increase IT performance
and availability.
Support: 3-Year Support Plus 24 only
Refer to the information on "Installation & Start-Up" for
service on ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm,
M-F, excluding HP holidays.
NOTE: High
Performance Computing (HPC) interconnect technologies are available for
the DL380 under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html
NOTE: For the Standard Features shipped in
the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
HP DL380 G5 Performance Models
Quad-Core Models HP DL380G5
X5460 4G 458561-001 HP DL380G5 E5450 4G
492205-001
Processor(s) Two of the following depending on Model
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO
Chassis. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Configuration (choose one of the following configurable models)
Models
HP ProLiant DL380G5
Rack CTO Chassis
391835-B21
Factory Integrated
Model ships with:
(8) SFF Serial Attached
SCSI (SAS) Drive Bays
Two embedded NC373i Multifunction Gigabit Server Adapters
PCI-Express Riser Cage
800Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
Rack (2U), (3.5-inch)
Step 1A: Choose Controller (must choose only one of
the following)
Controllers
HP Smart Array P400/256
for DL380 G5/ DL385 G2 FIO Controller NOTE: PCI Express
Step
3: Choose Additional Factory Integratable Options (only one of the following
from each list unless otherwise noted)
Performance
Packs
The HP ProLiant DL380
G5 performance packs are necessary to configure a HP ProLiant DL380 G5 Performance
Model. HP ProLiant DL380 G5 Performance model includes the latest performance
technologies and enterprise class availability features pre-installed for
convenience and value. The performance pack includes a 2nd processor and
a redundant power supply. NOTE: Must also select Slimline CD-RW/DVD-ROM
Combo Option Kit ( 331903-B21) to achieve parity to DL380 G5 High Performance
Models.
HP DL380G5 X5460
HPM FIO Perf Pack
458588-B21
HP DL380G5 X5450
HPM FIO Perf Pack
458589-B21
HP DL380G5 E5450
HPM FIO Perf Pack
494037-B21
Step 4: Choose
Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" "and
"Additional Options" section below.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
HP NC522SFP Dual Port 10GbE Server
Adapter NOTE: A minimum of two gigabyte (2
GB) of server memory is required per each NC522SFP adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP Insight Control server deployment, Electronic
License including 1 year of 24x7 Technical Support and Updates
T9082AAE
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license,
including one year of 24x7 Technical Support and Updates, Electronic
T9084BAE
HP Insight Control for Linux, No Media, 1-Server
license, including one year of 24x7 Technical Support and Updates
464423-B22
HP Insight Control for Linux, Media pack
(DVD) - No licenses included NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
464422-B22
NOTE: Licenses ship without
media. The HP Insight Control Media Kit can be ordered separately, or can
be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out Advanced
HP Integrated Lights-Out Advanced, No Media,
1-Server License, including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server
to be deployed and managed via HP iLO Advanced. Customer will receive a
printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
512485-B21
HP Insight Rapid Deployment software
HP Insight Rapid Deployment software No Media
1-Server License, including 1 year of 24x7 Technical Support and Updates NOTE: This license allows 1 server
to be deployed and managed via RDP. Customer will receive a printed license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
HP Smart Array P400/512MB BBWC
Controller NOTE: The HP Smart Array P400/512
MB BBWC Controller (PN 411064-B21) may only be installed in slots 3, 4,
and 5.
HP SA-P400 and SA-E500 24 In Battery
Cable Kit NOTE: This option kit contains a
24" battery cable and adhesive material for installing a battery into
the server if a Smart Array E500 or Smart Array P400 is integrated outside
of the factory. For all solutions, please refer to the server QuickSpecs
and User's Manual for detailed installation instructions.
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP 8 Internal Port SAS HBA with
RAID NOTE: When using the 8 Internal Port
SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer
rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
SCSI Controllers for External
Drive/Storage Support NOTE:
All Ultra 320 controllers are PCI-X and require the Mixed Riser Cage Option
Kit (PCI-E/PCI-X).
HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT
160 USB tape drive.
AG703A
DAT 320 USB External Tape Drive
AJ823A
DAT 320 WW SAS External Tape Drive
AJ828A
SAS Rack-Mount
Tape Solutions NOTE: HP recommends purchasing the
HP SC44Ge HBA ( 416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks 1U SAS Rack-Mount
Kit with one LTO-4 Ultrium 1760 NOTE: Pre-configured with one LTO-4
Ultrium 1760 SAS tape drive.
EH946A
HP StorageWorks 1U SAS Rack-Mount
Kit NOTE: Supports up to (2) half-height
SAS tape drives.
AE459A
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount
Kit (AE459A).
DW085A
HP StorageWorks LTO-3 Ultrium
920 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount
Kit (AE459A).
EH847A
NOTE: For an up-to-date listing of the
latest O/S and software support details for HP tape drives, please visit:
http://www.hp.com/go/connect.
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install the 1/8
G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount
instructions.
AH166A
NOTE: Please reference
the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 1 LTO-3
Ultrium 920 SAS Drive Library
AH559A
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4
Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SAS Drive Library
AH560A
NOTE: Please reference
the MSL Tape Library QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at: http://www.hp.com/go/ebs.
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX500 External
Removable Disk Backup System NOTE: 500GB of Disk Storage
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Shock Pallet NOTE: Due to handling and shipping
requirements, AF044A is only orderable through HP Factory Express. It is
not for direct sales. Customer site surveys are required before an order
is approved. CTO orders may require additional lead time.
AF044A
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Pallet
AF045A
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment
installed (by custom systems, VARs and Channels).
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
USB
and SD Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
Service
and Support Offerings
(HP Care Pack Services)
Hardware Services On-site
Service
NOTE: To attach
3 year, 4-Hour On-site Service to Smart Buy servers, Smart Buy Care Packs
must be used. For other service levels, order standard Care Pack part numbers.
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4544E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
U4545E
NOTE: Use one
of the following Smart Buy Care Packs to attach 3 year, 4-Hour On-site Service
to Smart Buy servers. For other service levels, order standard Care Pack
part numbers.
DL38x Smart Buy 4-Hour On-site
Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UE893E
DL38x Smart Buy 4-Hour On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UE894E
Hardware Services 6-Hour Call
to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
U4546E
Installation & Start-up
Services
Hardware Installation, Electronic
U4554E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4555E
Installation and Startup for Essentials
Rapid Deployment Pack, Electronic
U5683E
Support Plus
Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4556E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4557E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U6312E
Onsite HW support 24x7, 4hr response
and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time incl. HP holidays, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
2 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (2 x 1 GB)
Upgrading Memory and Memory Interleaving
When upgrading memory, DIMMs 1A and 3A must match. DIMMs 5B and 7B, DIMMs
2C and 4C, and DIMMs 6D and 8D must match and must be installed as a pair.
When DIMMs 1A and 3A are populated the system is automatically configured
for 2:1 interleaving. When all 4 banks are populated the system is automatically
configured for 4:1 interleaving. When four, six, or eight DIMMs are populated
with identical DIMMs the system is automatically configured for bank interleaving.
Standard Memory Plus Optional Memory
Up to 50 GB memory is available with the standard memory and the optional
installation of PC2-5300 Fully Buffered DIMMs (DDR2-667) memory kits.
Standard Memory Replaced with Optional Memory
Up to 64 GB of memory is available with the removal of the standard memory
and the optional installation of PC2-5300 Fully Buffered DIMMs (DDR2-667)
memory kits.
NOTE: Chart does not represent all possible configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
2 GB
1 GB
Empty
1 GB
Empty
Empty
Empty
Empty
Empty
Optional
50 GB
1 GB
8 GB
1 GB
8 GB
8 GB
8 GB
8 GB
8 GB
Maximum
64 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
NOTE: In the online spare
configuration, the ROM automatically configures the last populated bank
as the spare memory. If only banks A and B are populated, bank B is the
spare bank. If banks A, B, and C are populated, bank C is the spare bank,
Online spare memory is configured through RBSU. NOTE: Mirrored Memory
uses mirrored banks to provide a high level of memory redundancy. Customer chooses
to implement or not: User selectable via BIOS and default is off.
In Advanced ECC mode, FBDIMMs
must be populated as specified in the following table:
Configuration
Bank A
1A and 3A
Bank B
5B and 7B
Bank C
2C and 4C
Bank D
6D and 8D
1
X
-
-
-
2
X
X
-
-
3
X
X
X
-
4
X
X
X
X
Online spare memory configuration
Online spare FBDIMM configuration
requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank
FBDIMMs.
If banks A and C are being used, they must be fully populated.
If
installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If
installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
In
online spare mode, FBDIMMs must be populated as specified in the following table:
Configuration
Branch 0 Bank A 1A and 3A
Branch 0 Bank C 2C and 4C
Branch 1 Bank B 5B and 7B
Branch 1 Bank D 6D and 8D
1*
X
-
-
-
2
X
X
-
-
3
X
X
X
X
* Configuration 1 is
only supported if using bank A, populated with dual-rank FBDIMMs. All FBDIMMs
1GB and above are dual-rank. After installing FBDIMMs, use RBSU to configure
the system for online spare memory support ("Configuring online spare memory"
on page 57).
Mirrored memory configuration
Mirrored memory FBDIMM
configuration requirements (in addition to general configuration requirements):
Banks A and B must be fully populated.
Bank A and bank B
must contain FBDIMMs with identical part numbers. If installed, bank C and bank
D must also contain FBDIMMs with identical part numbers.
When
using mirrored memory mode, FBDIMMs must be populated as specified in the following
table:
Configuration
Bank A 1A and 3A
Bank B 5B and 7B
Bank C 2C and 4C
Bank D 6D and 8D
1
X
X
-
-
2
X
X
X
X
NOTE:
After installing FBDIMMs, use RBSU to configure the system for mirrored memory
support ("Configuring mirrored memory" on page 57).
Slimline CD-RW/DVD-ROM Combo
Option Kit NOTE: Included in performance
models.
Only
1 available removable media bay
Slimline
bay
Integrated IDE NOTE: Optional
Slimline
DVD-ROM Drive (8x/24x) Option Kit
Only
1 available removable media bay
Slimline
bay
Integrated IDE NOTE: Optional
HP
ProLiant Slim CD-ROM x24
Only
1 available removable media bay
Slimline
bay
Integrated IDE NOTE: Optional
HP
DVD+R/RW 8X Slim
Only
1 available removable media bay
Slimline
bay
Integrated IDE NOTE: Optional
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF Enterprise
(ENT) Drives
Quantity
Supported
Position
Supported
Controller
300GB 6G SAS 10K DP 300GB 3G
SAS 10K DP 146GB 6G SAS 10K DP
146GB 6G SAS 15K DP 146GB 3G SAS 15K DP 146GB 3G SAS 10K DP 72GB 6G SAS
15K DP 72GB 3G SAS 10K DP
72GB 3G SAS 15K DP
Up to 8
1-8
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller NOTE: Optional mixed PCI-X/E required
for SA-P600. HP Smart Array P800/512 BBWC Controller
SAS Hot Plug SFF Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 6G SAS 7.2K DP
Up to 8
1-8
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller NOTE: Optional mixed PCI-X/E required
for SA-P600.
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug SFF
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 8
1-8
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller NOTE: Optional mixed PCI-X/E required
for SA-P600.
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug SFF
Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 5.4K
120GB 1.5G SATA 5.4K
Up to 8
1-8
HP 8 Internal Port SAS HBA with
RAID NOTE: When using the 8 Internal Port
SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer
rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller NOTE: Optional mixed PCI-X/E required
for SA-P600.
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug Midline
(MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 8
1-8
HP 8 Internal Port SAS HBA with
RAID NOTE: When using the 8 Internal Port
SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer
rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller NOTE: Optional mixed PCI-X/E required
for SA-P600.
HP Smart Array P800/512 BBWC Controller
HP StorageWorks USB Tape Drives,
External DAT 40 USB DAT 72 USB DAT 160 USB 1U Rack-Mount
Kit
External
USB
2.0 Port
N/A
HP
StorageWorks SAS Tape Drives, External DAT 160 SAS LTO-2 Ultrium
448 SAS LTO-3 Ultrium 920 SAS LTO-4 Ultrium 1760 SAS LTO-4 Ultrium
1840 SAS 1U Rack-Mount Kit 3U Rack-Mount Kit
- Click on
the system of interest. Example: DL380 G5
- Follow the instructions of the next screens.
Power Supply Output
Power (per power supply)
Rated
Steady-State Power
800
W (at 100 VAC) 850 W (at 120 VAC) 1000W (qt 200-240 VAC)
Maximum Peak Power
800
W (at 100 VAC) 850 W (at 120 VAC) 1000W (at 200-240 VAC)
System Inlet Temperature
Operating
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed
are the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.1
B
LpAm
44
dBA
Operating
LWAd
6.1
B
LpAm
44
dBA
Emissions
Classification (EMC)
FCC Rating
Class
A
Normative Standards
CISPR
22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24;
EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible
to bear the appropriate compliance logos and statements.
Smart Array P400 Controller
Disk Drive and Enclosure Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port
connectors
Cache Memory Speed
DDR2-533MHz with 40 or 72-bit
wide bus provides up to 4.2 GB/s maximum bandwidth.
64-bit, supporting greater than
4GB server memory space
RAID Support
RAID 6 with ADG (Advanced Data
Guarding) requires Battery Backed Write Cache Upgrade
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Smart Array E200 Controller
Disk Drive and Enclosure
Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology
Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port
connectors
Cache Memory Speed
DDR1-266 MHz provides up to 4.2
GB/s maximum bandwidth.
Server Interface
x8 2.5G PCIe provides 2GB/s maximum
bandwidth.
SAS Speed
x8 3G SAS provides 2.4GB/s maximum
bandwidth.
Cache Memory
40-bit 64MB cache or a 128MB battery
backed cache: ECC protection, battery-backed, and transportable NOTE: The 64MB cache is not battery-backed
or transportable.
Logical Volumes Supported
Up to 32 logical volumes
Host Memory Addressing
64-bit, supporting greater than
4GB server memory space
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
405160-B21
© 2013 USA PartsDirect