HDD

• Support for SAS Hot Plug Enterprise(ENT) Hard Drives
• Support for SATA Hot Plug Midline (MDL) Hard Drives

• Processors:
  • Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence with 12MB Level 2 cache
  • Intel® 5100 Chipset
• Memory:
  • Up to 24 GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots
• Internal Drive Support:
  • Supports up to twelve via CTO with controller or up to eight via BTO with the addition of a controller:
    • Hot Plug Serial ATA (SATA) 3.5"hard drives; or
    • Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives
      NOTE: 4 hard drives are supported standard via BTO. 8 hard drive support requires the addition of a Smart Array or HBA controller. Hot Plug and SAS functionality require the addition of a Smart Array or HBA controller. 12 hard drive support available via CTO only and requires a SAS controller that supports expanders.
  • Internal storage capacity:
    • SATA Models: Up to 12.0TB (12 x 1TB Hot Plug 3.5" hard drives)
    • SAS Model: Up to 12.0TB (12 x 1TB Hot Plug 3.5" hard drives)
• Network Controller:
  • One integrated NC105i PCI-e Gigabit NIC (embedded) (Wake on LAN and PXE capable)
• Storage Controllers:
  • HP Embedded SATA RAID Controller (up to 4 hard drive support on standard BTO models)
    NOTE: Transfer rate 1.5 Gb/s SATA
• Expansion Slots:
  • One available Low Profile x8 PCI-Express slot using a Low profile Riser.
  • Two Full Height/ Full Length Riser options
    • Option1: 2 full-length/full-height PCI-Express x8 connector slots (x4 electrical - Standard)
    • Option2: full-length/full-height riser with 2 PCI-X Slots(Optional)
• Infrastructure Management:
  • Optional HP Lights Out 100c Remote Management card with Virtual KVM and Virtual Media support (includes IPMI2.0 and SMASH support)
• USB Ports:
  • Seven USB ports (2) front, (4) rear, (1) internal
• Optical Drive:
  • Support for one:
    • Optional Multi-bay DVD
    • Optional Floppy (USB only, USB key)
• Power Supply:
  • 750W Power Supply (Optional Redundancy Hot Plug, Autoswitching) CSCI 2007/8
  • 1200W High Efficiency Power Supply (Optional Redundancy Hot Plug, Autoswitching) (Optional) CSCI 2007/8
    • NOTE: Climate Savers Computing Initiative, 2007-2008 Compliant
• Form Factor:
  • 2U rack models
• Deployment/Serviceability:
  • Tooled access to all system components for easy in rack serviceability
  • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase (3-1-1 warranty in AP and Brazil). Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
  • NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year (3-1-1-in AP and Brazil) Onsite support (3-1-1-in AP and Brazil) with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Memory

32MB shared supporting 1600 x 1200 x 16M resolution.

With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers.

The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.

The optional HP PL100 G5 Lights-Out 100c Kit ALL provides the following OS-independent remote control capabilities with a riser card:

• Virtual power
• System event log access
• System health
• Remote Serial console (serial redirection)
• Browser, Telnet access
• SMASH-CLP compliant
• IPMI 2.0 compliant
• Virtual media (Floppy, CD, USB 2.0 (with release 3.0)
• Secure Socket Layer Encryption
• Secure Shell Encryption
• Virtual KVM

One Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)

NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords that allow connection to 110V US wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered separately.

If a local power cord is required, please reference the following power cord matrix: http://www.hp.com/go/powercordmatrix.

Microsoft Windows 2003 R2
Microsoft Windows Server 2008
Microsoft Windows Small Business Server 2008
Microsoft Windows Essential Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris for x64/x86-based Systems

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

HP services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

• Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
• Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

• Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
• Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

HP DL180 G5, E5420 2.50GHz,(QC) 1GB (1P)
456830-xx1

HP DL180 G5, E5405 2.00 GHz,(QC) 1GB (1P)
456831-xx1

BTO internal storage capacity of up to:
8.0TB (8 x 1TB Hot Plug 3.5" SATA hard drives)
8.0TB (8 x 1TB Hot Plug 3.5" SAS hard drives)

 335921-B21

Following are memory options available from HP:

1 GB REG PC2-5300 2 x 512 MB Single Rank Kit

 408850-B21

1 GB REG PC2-5300 1 x 1 GB Kit

462483-B21

HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP SC11Xe Host Bus Adapter

NOTE: Please visit http://www.hp.com/go/connect for details about minimum SAS controller firmware version and SAS cabling requirements.

To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/calc/
Power%20Calculator%20Catalog.xls

• Click on the system of interest. Example: DL180 G5
• Follow the instructions of the next screens.

System Inlet Temperature

Relative Humidity
(non-condensing)

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.