Performance dual processor server blade designed with enterprise availability
HP ProLiant BL20p Generation 3 server blade includes:
Up to two 64-bit Intel® Xeon™ dual-core processors:
2.8GHz, or
Up to two 64-bit Intel Xeon single-core processors: 2.8GHz, 3.0GHz,
3.2 GHz, 3.4 GHz, 3.6 GHz or 3.8 GHz with 1MB or 2MB cache depending
on processor
Intel E7520 Chipset
1024 MB or 2048 MB PC2-3200 Registered ECC 400 MHz DDR2 memory
standard, (2 x 1 Interleaved Memory), expandable to 8 GB maximum
Four NC7781 PCI-X Gigabit NICs (embedded)
One additional 10/100 NIC dedicated to iLO Management
Smart Array 6i (integrated on system board Controller with optional
battery-backed write cache)
Ultra320 SCSI Drive Cage standard; supports up to two 1" Ultra320
SCSI hot plug hard drives
New Power Regulator for ProLiant delivering server level, policy based
power management with industry leading energy efficiency and savings
on system power and cooling costs.
Integrated Lights-Out featuring new firmware v 1.70 with support for
Power Regulator for ProLiant and introducing support for the draft DMTF
System Management Architecture for Server Hardware Command Line Protocol
standard
Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
Emulex-based Fibre Channel Mezzanine card for HP p-Class BladeSystem
HP ProLiant BL20p server blade plugs vertically into 6U enclosure
I/O cable with two USB ports, one video port, one iLO port and kernel
debug port. The cable was specifically designed to aid in initial server
image deployment.
Integrated Access Tool for blade management and enhanced server blade
documentation including Best Practices and Common Procedures guides
Protected by HP Services and a worldwide network of resellers and
service providers. Three-year parts, 3 Year Labor and 3 Year on-site
limited global warranty. Certain restrictions and exclusions apply.
Pre-Failure Notification on processors, memory, and SCSI hard drives
Upgradeable to dual processing
(2 Processors) NOTE: Single-Core Models are not
upgradeable to Dual-Core Models.
Cache
Memory
1MB Level 2 Cache, Single-Core
(Depending on model)
2MB Level 2 Cache, Single- Core
(Depending on model)
4MB Level 2 Cache, Dual-Core,
(Depending on model)
Chipset
Intel E7520 chipset
Memory
Type
2-way
interleaved PC3200 DDR2 SDRAM
running at 400 MHz
Standard
1024 MB
(On 1P models)
2048 MB
(On 2P models)
Maximum
8 GB
NOTE:
Memory must be installed in pairs.
Network Adapter
Five network adapters total:
Four NC7781 PCI-X Gigabit NICs
(embedded) with WOL and PXE
One 10/100 iLO NIC dedicated
to management NOTE: Must use HP BladeSystem p-class
server blade enclosure with enhanced backplane to utilize all four NIC's
(281404-B22).
Expansion Slots
No PCI slots all features are
integrated
I/O cable connectors:
(2)USB ports, (1) video port,
(1) iLO port and (1) kernel debug port
(2) I/O cable ships with every
server blade enclosure
Tested USB devices (keyboard,
mouse, floppy) are listed in the "Options" section of this QuickSpecs
Integrated Manageability
Integrated Lights-Out (iLO)
Management Advanced (ASIC on the System Board)
Internal Storage
Hard Drives
None ship standard
Maximum Internal Storage
SCSI
600 GB (internal drive cage)
(2 x 300 GB Ultra320, 1"
drive)
Graphics
Integrated ATI Rage XL Video
Controller with 8-MB SDRAM Video Memory
Graphics Resolution Supported
Resolution Color Depths
Depths 1280 x 1024, 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fiber Channel on
the
HP ProLiant BL20p G3 server blade
Two optional fiber channel adapters
are supported by the HP ProLiant BL20p G3. Both adapters are mezzanine circuit
boards which connect directly to the server blade system board. These optional
fiber channel adapters are available via option kits and must be ordered
separately
QLogic based
Utilizes a QLogic ISP2312 chipset
The Qlogic BL20pG3 dual-port Fibre Channel Adapter (P/N 361426-B21)
is compatible with the HP ProLiant BL20p G3 server blade. Cannot
be used for HP ProLiant BL20p G2 or HP ProLiant BL25p/30p/35p/40p/45p
server blades)
Includes two small form factor pluggable transceivers with LC
connectors for installation into the Patch Panel 2, CGESM or GbE2
Interconnect Switch (with the Storage Connectivity Kit)
Emulex-based
Utilizes an Emulex Thor chipset
The Emulex based HP ProLiant 20p G3 Dual Port Fibre Channel HBA
(P/N 394757-B21) is compatible with the HP ProLiant BL20p, server
blade. It cannot be used with HP ProLiant BL25p/30p/35p/40p/45p
server blades.
There are no SFP's included in the Emulex mezzanine kit for use
with ProLiant BL p-Class Fibre Channel pass-through interconnects.
If you require SFPs for use with an Emulex mezzanine and a FC pass
through interconnect please order an SFP option kit (P/N 397577-B21)
which will provide 2 FC SFPs per option kit.
Two ports on each Dual-port Fibre Channel Mezzanine Card provide a
redundant Fibre Channel connection to each server blade
Supports up to 2 Gb/s Fibre Channel equipment
The HP ProLiant BL20p G3 server blade can be ordered with the Dual-port
Fibre Channel Adapter installed or the Dual-port Fibre Channel Adapter
Option Kit can be ordered separately.
Compatible SAN
HP ProLiant BL20p G3 server blades are optimized for StorageWorks arrays
ProLiant Essentials Foundation Pack Software for
the ProLiant BL Server
HP Systems Insight Manager
HP Systems Insight Manager
(HP SIM) provides a unified, secure and extensible environment to
centrally manage servers, storage and other infrastructure devices
across multiple operating system platforms.
Through a single management view, HP SIM provides core management
services that include device discovery and identification, event
views, health monitoring, inventory data collection, software version
control and reporting. HP SIM is built on industry standards and
is extensible with value-added ProLiant Essentials, Integrity Essentials
and Storage Essentials software to meet individual management needs.
For more details on HP SIM visit http://www.hp.com/go/hpsim.
HP SIM provides organizations with the following benefits:
Simplifies and consolidates infrastructure lifecycle management
using task and query based functionality
Provides the foundation for infrastructure automation and virtualization
Enables IT management based on business processes not hardware
platforms
Lowers infrastructure maintenance cost and frees resources
for innovation
Maximizes resource utilization with virtualization technologies
Provides a central point of integration between infrastructure
and Enterprise management tools such as HP OpenView
ProLiant Essentials Rapid
Deployment Pack
Rapid Deployment Pack (RDP) is an automated deployment and provisioning
solution for all ProLiant servers. RDP includes the Altiris Deployment
Solution and ProLiant Integration Module featuring ProLiant server
pre-configured events for OS installation, and optimized software
drivers, firmware and management agents. Every RDP CD includes 10-node
trial licenses for evaluation purposes. RDP requires a license for
each server deployed and is available for purchase with blade servers.
For more information, visit http://www.hp.com/servers/rdp.
Insight Management Agents
Insight Management Agents
should be installed on all HP servers to present system instrumentation,
health and configuration information into HP Systems Insight Manager
and the HP System Management Homepage. The HP System Management Homepage
aggregates systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers.
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed
using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack. For additional information about the Management
Agents and the HP System Management Homepage please visit the management
Web site at http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides software and driver change notifications for
ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ROMPaq,
support software, and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options, available in the RDP CD, SmartStart or downloadable from
Software and Drivers download pages, linked from the SmartStart website
at http://www.hp.com/go/support.
Insight Diagnostics
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at
your fingertips, available in SmartStart.
Optional software offerings that selectively extend the functionality
of an Adaptive Infrastructure to address specific business problems and
needs:
Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route based
on network conditions, plus it provides an extra layer of protection.
The virus throttle feature of the solution slows the propagation of
fast spreading virus.
Performance Management Pack - a performance management solution that
identifies and explains hardware performance bottlenecks on ProLiant
servers and attached options enabling users to better utilize their
valuable resources.
Rapid Deployment Pack (RDP) is an automated deployment and provisioning
solution for all ProLiant servers. RDP includes the ProLiant Integration
Module featuring ProLiant server pre-configured events for OS installation,
and optimized software drivers, firmware and management agents. Every
RDP disc includes 10-node trial licenses for evaluation purposes. RDP
requires a license for each server deployed and is available for purchase
with HP servers. For more information, visit: http://www.hp.com/servers/rdp.
Server Migration Pack - P2P Edition: Upgrading or replacing your existing
server? Effortlessly transition to new servers with automated, accurate
and affordable migration of OS, application and data.
Virtualization Management Software - Get the most out of server virtualization
by unifying the management of physical and virtual servers in HP Systems
Insight Manager. The Virtual Machine Management Pack plug-in provides
central management and control of VMware and Microsoft virtual machines
and provides physical host to virtual machine association. The Server
Migration Pack plug-in automates the manual task of migrating servers
between physical or virtual platforms.
Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well as
operating system configurations that can be exploited by viruses, worms
and other blended threats
Workload Management Pack - provides easier management of complex environments,
improving overall server utilization and enabling Windows® 2000
customers for the first time to confidently deploy multiple applications
on a single multiprocessor ProLiant Server.
NOTE: Flexible and volume quantity
license kits are available for ProLiant Essentials Value Packs. Refer
to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
SmartStart
SmartStart is a tool that simplifies
single server setup, providing a rapid way to deploy reliable and consistent
server configurations. SmartStart 7.00 and later can now deploy the HP ProLiant
BL20P G3 and HP ProLiant BL40P server blades, using the I/O port with an
attached USB CD-ROM device. To obtain a copy of SmartStart for your blade
server, redeem the coupon that is included with your Blade server or order
your copy from the SmartStart web site. For more information, please visit
the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 6.20
OS
Support
Microsoft Windows 2000 Server
Microsoft Windows 2000 Advanced Server
Windows Server 2003, Standard Edition
Windows Server 2003, Enterprise Edition
Red Hat Enterprise
SUSE Linux Enterprise Server
Solaris 10 32/64-bit
Virtual Text and Graphical Remote Console
Virtual CD-ROM*
Virtual Floppy*
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
Automatic Server Recovery-2
(ASR-2)
Insight Manager 7
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server and Interconnect Switch Health Logs
Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Interconnect Switch Management System and Utilities (Interconnect Switch
option)
Integrated Management Log (IML)
Dynamic sector repairing and drive parameter tracking (with Smart Array
controllers)
Network adapter teaming set-up utility
*NOTE:
Advanced features such as Graphical Remote Console and Virtual Floppy are
included with the BL p-Class server.
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 6i
Plus) on every server blade (Battery-backed write cache is optional.)
Redundant ROM on each server blade ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing,
switch-assisted load balancing)
Security
Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration
and deployment services for HP servers and storage products. Customers
can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple
configuration, racking, installation, complex configuration and design services as well
as individual factory services, such as image loading, asset tagging, and
custom packaging. HP products supported through Factory Express include a wide
array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
Service
and Support
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of resellers and service providers.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements.
NOTE: Server Blade Limited Warranty
includes 3 year Parts, 3 year Labor, 3-year on-site support. This warranty
supports the HP ProLiant BL20p, HP ProLiant BL25p, HP ProLiant BL40p and
HP ProLiant BL45p Server Blades. NOTE: Server Blade Limited Warranty includes 3 year Parts, 1 year
Labor, 1-year on-site support. This warranty supports the HP ProLiant
BL30p and HP ProLiant BL35p Server Blades. NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts,
3 year Labor, 3-year on-site support. NOTE: Server Blade Interconnect Limited Warranty includes 3 year
Parts, 3 year Labor, 3-year on-site support. Additional
information regarding worldwide limited warranty and technical support
is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
The HP Care Pack service part numbers below for ProLiant BL p-Class server
blades, cover the server blade and all HP branded hardware options qualified
for the server, purchased at the same time or afterwards, internal to
the server.
HP Care Pack services for HP BladeSystem p-Class server blade enclosure
covers the enclosure including patch panels, HP supported Ethernet interconnects,
power enclosure with power supplies and power distribution.
HP services provide continuous care and support expertise with committed
response designed to meet your IT and business needs.
To fully capitalizing on your HP BladeSystem servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a HP BadeSystem server support offer to help you speedily
deploy and maximize system uptime.
Enhanced Care - Minimum recommended service support offer designed to
ensure customers have access to expert assistance, whenever they need
it.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years.
Continuance Care - Recommended service delivering cost-effective support
options designed to extend HP Services committed response and guaranteed
fix times, designed to speed problem identification and resolution.
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years.
Total Care - Highest HP Support service level recommend to help increase
IT performance and availability with comprehensive, integrated hardware
and software services
Support Plus 24 - Onsite HW support 24x7, 4hr response and Microsoft
O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time incl. HP holidays.
Deployment Services - HP Installation and Start Up services designed
to take time, risk, and worry out of the deployment of HP BladeSystem
servers - and free customers IT support staff to focus on what they do
best, their business.
Installation & Start-Up service for HP BladeSystem Infrastructure
plus HP BladeSystem Enhanced Network Installation and Start-UP as per
the Customer Description and/or Data Sheet. To be delivered on a scheduled
basis 8am-5pm, M-F, excl. HP holidays
Configuration Information Factory Integrated Models (North America only)
NOTE:
For Configure to Order requirements within EMEA region, please consult local
Sales Contact.
NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step 1: Base Server Blade Configuration
Models
HP ProLiant BL20p
G3 CTO Blade (North America)
396226-405
Configurable
Model ships with:
Two NC7781 PCI-X
Gigabit NICs (embedded) with WOL and PXE
One additional
10/100 NIC dedicated to iLO Management
Smart Array 6i
Plus Controller (integrated on system board)
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted):
For single processor
configuration choose:
Processors
Intel Xeon 2.8
GHz - 4M Dual-Core Processor Option Kit FIO BASE NOTE: If 2 processors are desired,
select one 407223-B21 and one 407223-B21
Emulex-based
Fibre Channel Mezzanine card for HP p-Class BladeSystem NOTE:
SFPs for use with pass through SAN switches not included with the Emulex based
Fibre Channel Mezzanine card. If SFPs required please order the SFP option kit
(P/N 397577-B21) which includes 2 2Gb SFPs per option kit.
HP 2-2Gb SFP for
Fibre Channel pass through kit NOTE:
Must select if SFP for use with pass through SAN switches is required when ordering
Emulex based Fibre Channel Mezzanine card for HP p-Class BladeSystem (P/N 394757-B21).
HP ProLiant BL20p
Dual NC370i Multifunction Network Adapter NOTE:
The HP BladeSystem Multifunction iSCSI and RDMA features are not currently supported
in a Linux environment. Future support is planned.
374963-B21
NOTE:
A minimum of 1 GB of memory per port is required for NC370x adapters, with a maximum
of two NC370x ports permitted in a server.
HP ProLiant BL20p
G3 NIC MEZZ FIO
396754-B21
Step
4: Choose Additional Options for Factory Integration
NOTE:
For additional options, including server blade enclosure with enhanced
backplanes, interconnect options and power subsystem options, please refer
to the "Options" section below.
ProLiant Essentials
Intelligent Networking PackWindows Edition and Linux Edition
ProLiant Essentials
Intelligent Networking Pack Windows Edition, Single Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
372906-B21
ProLiant
Essentials Intelligent Networking Pack Linux Edition, Single Server License
NOTE: For use with a single server. Contains one license with a unique
license activation key and documentation.
ProLiant Essentials
Performance Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation. NOTE: The most recent version of the software can always be downloaded
at http://www.hp.com/products/pmp.
ProLiant Essentials
Server Migration Pack, Single-Migration License NOTE: Contains one license, enabling
1 server migration, with a unique license activation key and documentation. NOTE: This license allows 1 server to be migrated from a physical
server to a virtual machine. Or this license can be used to migrate a virtual
machine from one virtualization layer i.e. VMware GSX to a different virtualization
layer such as VMware ESX or Microsoft Virtual Server 2005.
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
ProLiant Essentials
Vulnerability and Patch Management Pack
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
HP Control Tower
BladeSystem p-class Management Software
HP Control Tower for HP p-Class
BladeSystem, Media pack (CD) - No licenses included NOTE: This optional Media pack CD
contains the ISO image for the HP Control Tower management appliance that
must be installed in a HP ProLiant BL20p G3 server. Servers must be acquired
separately. NOTE: This Media pack is optional because the latest ISO image may
be downloaded at no cost from: http://www.hp.com/go/controltower
412956-B21
HP Control Tower for HP BladeSystem,
Single Server License. No media included. NOTE: For use with a single blade
server. Contains one license with a single unique license activation key.
412957-B21
HP Control Tower for HP BladeSystem,
Eight-pack (8-pack) Server License. No media included. NOTE: For use with eight (8) blade
servers. Contains eight (8) licenses with a single unique license activation
key.
412958-B21
HP Control Tower for HP BladeSystem,
Flexible License. No media included. NOTE: For use with multiple servers
(minimum of 5). This part number can be used to purchase multiple licenses
with a single activation key. The quantity ordered for this part number
will be the quantity of licenses included in the kit in the form of a corresponding
activation key. Use the same key to activate all licenses in the actual
quantity ordered. For a given order, one kit will be delivered with the
activation key.
NOTE: Please see
the following Controller QuickSpecs for Technical Specifications such as
PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak
Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information: http://h18000.www1.hp.com/products/quickspecs/12030_div/12030_div.HTML
(Smart Array 6i)
Communications
HP ProLiant BL20p Dual NC370I Multifunction Network Adapter NOTE:
The HP BladeSystem Multifunction iSCSI and RDMA features are not currently supported
in a Linux environment. Future support is planned.
374963-B21
NOTE:
A minimum of 1 GB of memory per port is required for NC370x adapters, with a maximum
of two NC370x ports permitted in a server.
NOTE:Must select if SFP for use
with pass through SAN switches is required when ordering Emulex based Fibre
Channel Mezzanine card for HP p-Class BladeSystem (p/N 394757-B21.
*NOTE: When using this card, the Patch Panel 2 , CGESM or GbE2
Interconnect Switch (with Storage Connectivity Kit) must be used to provide
the Fibre Channel pass through. *NOTE: The HP ProLiant BL20p
G2 dual-port Fibre Channel adapter is not compatible with the HP ProLiant
BL20p G3.
HP BladeSystem Entry
Bundle
HP BladeSystem Entry
Bundle
390738-B21
Bundle Contents:
Server Blade Enclosure
Server Blade Enclosure with enhanced
backplane components
Power Subsystem
1U Power Enclosure with 2 power
supplies
NOTE:
This bundle includes the 1U Power Enclosure with 2 power supplies and a
server blade enclosure with enhanced backplane components.
NOTE: The Diagnostic
Station allows access to the HP ProLiant p-Class server blades and the BL
p-Class interconnect switch outside of the server blade enclosure. The option
provides power and a data interface so that "offline" upgrade
and diagnostic functions may be performed.
Tape Libraries
HP StorageWorks MSL6000
Tape Library
Ultrium 960 technology
HP StorageWorks MSL6030 1 Ultrium
960 Dr LVDS Library
AD606B
HP StorageWorks MSL6030 1 Ultrium
960 Dr FC Library
AD608B
HP StorageWorks MSL6030 2 Ultrium
960 Dr LVDS Library
AD607B
HP StorageWorks MSL6030 2 Ultrium
960 Dr FC Library
AD609B
SDLT 600 technology
HP
StorageWorks MSL6052 2 SDLT 600 Dr LVDS Library
AD587A
HP StorageWorks MSL6052 2 SDLT
600 Dr FC Library
AD588A
Ultrium 460 technology
HP
StorageWorks MSL6030 1 Ultrium 460 Dr LVDS Library
AD598B
HP
StorageWorks MSL6030 1 Ultrium 460 Dr FC Library
AD600B
HP StorageWorks MSL6030 2 Ultrium
460 Dr FC Library
AD601B
NOTE: Please reference
the MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
HP
StorageWorks Virtual Library Systems
HP StorageWorks 6105 Virtual
Library System
AF728A
HP StorageWorks 6510 Virtual
Library System
AF729A
HP StorageWorks 6840 Virtual
Library System
AG051A
NOTE: Please
reference the Virtual Library Systems QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution. Reference
current compatibility information at http://www.hp.com/go/ebs
NOTE: xxxxxx-B22
(shock pallet) used to ship racks with equipment installed (by custom systems,
VARs and Channels). xxxxxx-B23 (crated) used for air shipments of empty
racks. NOTE: It is mandatory to use a shock pallet in order to ship racks
with equipment installed.
NOTE For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Service
and Support Offerings (HP Care Pack Services)
NOTE:
The HP Care Pack service part numbers below for ProLiant BL p-Class
server blades, cover the server blade and all HP branded hardware
options qualified for the server, purchased at the same time or
afterwards, internal to the server.
Hardware Services On-site
Service
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
UD187E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
UD188E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UD189E
NOTE: The
HP Care Pack service part numbers below for HP BladeSystem p-Class
server blade enclosure covers the enclosure including patch panels,
HP supported Ethernet interconnects, power enclosure with power supplies
and power distribution.
Hardware Services On-site
Service
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
HC031E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
HC032E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
HC033E
NOTE: The
HP Care Pack service part numbers below covers the HP BladeSystem
Brocade and McData SAN Switches.
Hardware Services On-site
Service
Next Business Day On-site
Service, 5-Day x 9-Hour Coverage,
3 Years, Electronic
UC007E
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
UC008E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
UC009E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UC023E
Installation & Start-up Services
HP Installation & Startup
Service for HP BladeSystem Infrastructure, Electronic NOTE: Provides for an integrated
hardware and software implementation that includes remote service
planning, onsite deployment of hardware and software, installation
verification testing and customer orientation. Hardware deployment
covers the installation of a single BladeSystem enclosure that include
server blades (up to 16), Ethernet network interconnect, and power
options. Software deployment covers the installation and configuration
of HP Systems Insight Manager (SIM), HP Rapid Deployment Pack (RDP),
and deploy up to two operating system editions of either Windows or
Linux, using scripted operating system installation software.
UC905E
ProLiant BL p-Class Blade
Server Hardware Installation, Electronic
UA219E
ProLiant BL p-Class Enclosure
and Server Blade Hardware Installation, Electronic
U4971E
Provides for the Installation
and Start-up of ProLiant Essentials Rapid Deployment Pack, Electronic NOTE: Provides installation
on a Customer supplied server designated as a Deployment Server. Includes
the deployment of a single server. This new server will be deployed
using either one of the pre-configured scripts or an image. In addition,
the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To
be delivered during standard office ours, standard office days.
U5683E
Provides for the Installation
and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment
Pack (Basic) (Electronic)
UA042E
HP ProLiant Essentials Vulnerability
and Patch Management Pack Installation and Startup Service, Electronic NOTE: Service coverage: onsite
installation of the Vulnerability and Patch Management (VPM) software
on a customer designated server, configuration of the VPM software
to acquire security patches, enabling the VPM software to scan up
to five (5) systems, applying the security patches to the designated
servers, generating a report from VPM that shows the vulnerability
assessment results, and providing customer with an orientation to
the software.
UC929E
Provides for the Installation
and Start-up of System Insight Manager (Electronic)
UA041E
Provides for the Installation
and Start-up of System Insight Manager (Electronic)
All DIMMs must be PC2-3200 DDR2 400 MHz SDRAM ECC DIMMs.
Both DIMM slots in a memory bank must be populated.
Both DIMMs in a memory bank must be identical. Install identical DIMMs
as pairs only, starting with DIMM socket 1, bank A.
Populate both slots in a bank at the same time: DIMMs 1 and 2 reside
in bank A, and DIMMs 3 and 4 reside in bank B.
HP ProLiant BL20p G3 Server Blade (2P Model)
Standard Memory
2048
MB
PC2-3200 Registered DDR2 SDRAM DIMM installed (2 x 1 GB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up
to 6144 MB of DDR2 SDRAM DIMM memory is available with the installation
of optional DDR2 SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 8192-MB of DDR2 SDRAM DIMM memory is available with the removal
of standard memory and the installation of optional SDRAM DDR DIMM memory
expansion kits.
Standard Memory
1024 MB PC2-3200 400 MHz Registered DDR2 SDRAM DIMM installed
Standard Memory Plus Optional Memory
Up to 5120 MB of DDR2 SDRAM DIMM memory is available with the installation
of optional DDR2 SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 8192 MB of DDR2 SDRAM DIMM memory is available with the removal of
standard memory and the installation of optional DDR2 SDRAM DIMM memory
expansion kits.
*NOTE:
All temperature ratings shown are for sea level. An altitude derating of 1°C
per 304.8 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct
sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia.
Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia. **NOTE:
Storage maximum humidity of 95% is based on a maximum temperature of 45°C
(113°F). Altitude maximum for storage corresponds to a pressure minimum of
70 KPa.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
361426-B21
© 2013 USA PartsDirect