Supports 1 Intel Pentium 3.20
GHz processor supporting Hyperthreading technology with 1024-KB second
level ECC cache standard 800MHz front-side-bus
SATA Model: Intel® Pentium® 3.00 GHz processor,
4 port SATA RAID controller, and Standard 4 x 1" Wide SATA Hot
Plug Drive Cage
Supports 1 Intel Celeron® 2.60 GHz, processor
with 128-KB second level ECC cache standard, 400MHz front-side-bus
Supports 1 Intel Pentium 2.80 GHz processor supporting
Hyperthreading technology with 1024-KB second level ECC cache standard
800MHz front-side-bus
Supports 1 Intel Pentium 3.00 GHz processor
supporting Hyperthreading technology with 1024-KB second level ECC cache
standard 800MHz front-side-bus
At A Glance
Intel E7210 (875P) Chipset
with 400Mhz FSB (Celeron Models) and 800Mhz FSB (Pentium 4)
256-MB or 512-MB (Pentium 4n models) of PC3200 DDR
SDRAM running at 400MHz, with Advanced unbuffered ECC capabilities standard,
expandable to 4 GB
Broadcom 5705 PCI Gigabit NIC (embedded) 10/100/1000
WOL (Wake on LAN)
Integrated Dual Channel Ultra ATA/133 Adapter (ATA
Models) or a Single Channel Wide Ultra320 SCSI Adapter (SCSI Models)
Support for up to four 1" Ultra320 NHP SCSI
hard drives or three 1" ATA/100 NHP Drives or four 1" hot
plug SATA HDD, (depending on Model & Accessories)
Five total PCI slots (5 available on ATA models,
4 available on SCSI models, 4 available on SATA model): three 64-bit/66MHzPCI-X
at 3.3 Volt and two 32-bit/33MHz PCI at 5 Volt
Internal storage capacity of up to 288 GB (4 x 72GB
non-hot plug 1" SCSI HDD) (SCSI Models)
Internal storage capacity of up to 480 GB (3 x 160
GB 1" ATA/100 drives - 4th channel is attached to CD-ROM Drive)
(ATA Models)
Internal storage capacity of up to 1TB (4 x 250GB
hot plug 1" SATA HDD) (SATA Model)
Integrated ATI Rage XL with 8MB SDRAM video
350W Power Supply
Two USB 2.0 ports
ROM Based Setup Utility (RBSU) and PXE support
Protected by HP Services, including a one-year, limited
warranty, Next Business Day 1 year on-site limited Global warranty -
Certain restrictions and exclusions apply.
SATA model: This model is not preconfigured with a specific SATA Drive.
Customer must make a SATA drive selection upon purchase. ILP price does
not include drive.
Maximum Internal Storage
(SCSI Models)
288 GB Internal Drive Cage Maximum
SCSI capacity (4 x 72GB)
Maximum Internal Storage
(ATA Models)
480 GB (3 x 160 GB) (internal
drive bays and removable media bays)
Maximum Internal Storage
(SATA Model)
1 TB Internal Drive Cage Maximum
SATA capacity (4 x 250GB)
Integrated ATI RAGE XL Video
Controller with 8MB SDRAM Video Memory
Form Factor
Tower (5U)
Industry Standard
Compliance
ACPI V1.0b Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
Novell Logo certifications
Manageability
Offline Version - "floppy-based"
method to flash the rom
BIOS Serial Console
Security
Power-on password
Setup password
Diskette boot control
Intruder Alert Message
Server Power Cords
One Lowline NEMA power cord
and one Highline IEC Power cord ships standard
Power Supply
350 Watts, PFC (Power Factor
Correcting)
System Fans
1 - Non-hot plug, Non-redundant
system fan shipped standard
1 - Non-hot plug, Non-redundant
CPU heatsink fan shipped standard
OS Support
Microsoft Windows® 2000
Server
Microsoft Windows Server 2003
Microsoft Windows Small Business Server 2003
Novell NetWare 6.5
Novell NetWare 6.0
Novell NetWare 5.1
Novell NetWare SBS 6.5
Red Hat Linux 9
Red Hat Enterprise Linux 2.1
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of servers
and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000 & EVA5000, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific model
please contact your sales representative or go to http://www.hp.com/go/factory-express
Service and Support
One-year limited warranty, including
hardware diagnostic support, coverage of hard drives, memory and processor.
The warranty is fully supported by HP Services and a worldwide network of
resellers and service providers. In addition 90-day's getting started software
telephone support may be covered under the warranty or available for an
additional fee. Enhancements to warranty services are available through
HP Care Pack services.
NOTE: Limited warranty includes 1
year parts, 1 year labor, 1-year on-site support
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux,
ProLiant Essentials and VMWare-based IT solutions helping to deliver
high level of application availability. Response times range from 30
mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack Services include HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the
enclosure, as well as 22" and smaller external monitors and tower
UPS options up to 3KVA. 22" and smaller external monitors will be
covered at the same service level and coverage period as the server. For
servers or storage systems installed within a rack, service also covers
all HP qualified rack options installed within the same rack.
NOTE: For more
information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
http://www.hp.com/hps/carepack NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at: http://www.hp.com/hps NOTE: Additional information regarding worldwide limited warranty
and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
160-GB ATA 100 7,200 RPM Hard
Drive (1") NOTE: If 2.6GHz processor chosen,
40GB ( 230534-B21) is default first HDD. If customer prefers first HDD to
be 80GB, choose 278424-B21; if 2.8GHz or higher processor chosen, 80GB ( 278424-B21)
is default first HDD. If customer prefers first HDD to be 40GB, choose 230534-B21
ProLiant Essentials Intelligent
Networking Pack Track License NOTE: Flexible and volume quantity
license kits are available for ProLiant Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: The Tested Product
List (TPL) is a list of HP and standard 3rd party devices (hardware or
software) that have been tested by either HP or independent test houses
for basic compatibility with the HP ProLiant ML110. HP products are supported
by HP, non-HP products are not supported by HP. For non-HP products, you
must obtain support from their own manufacturer. Non-HP third party products
have been tested only for compatibility with the specified HP server.
This level of testing confirms proper device recognition by the HP server
and basic compatibility with the identified HP server. HP disclaims all
responsibility and liability for the manufacturing, distribution, marketing,
licensing, installation, use, performance, maintenance, safety, regulatory
certification, and support of these 3rd party products.
256-MB of PC3200 DDR SDRAM running
at 400MHz (Celeron models running at 200 MHz), with Advanced ECC capabilities
Memory installed (1 x 256-MB SDRAM DIMM).
Standard Memory Plus Optional
Memory
Up to 3328-MB memory is available
with the optional installation of PC3200 ECC DDR SDRAM DIMM Memory kits.
Standard Memory Replaced
with Optional Memory
Up to 4096-MB of memory is available
with the removal of the standard 256-MB of memory and the optional installation
of PC3200 ECC DDR SDRAM DIMM Memory kits.
NOTE: Charts do
not represent all possible memory configurations.
Memory
Slot
4
3
2
1
Standard
256 MB
Empty
Empty
Empty
256 MB
Optional
3328 MB
1024 MB
1024 MB
1024 MB
256 MB
Maximum
4096 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from
HP:
256MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
354557 -B21
512MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
354560 -B21
1024MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 1024
MB)
354563 -B21
HP server ML110 Pentium 4 SBS
Models
Standard Memory
512-MB of PC3200 DDR SDRAM running
at 400MHz, with Advanced ECC capabilities Memory installed (1 x 512-MB SDRAM
DIMM).
Standard Memory Plus Optional
Memory
Up to 3584-MB memory is available
with the optional installation of PC3200 ECC DDR SDRAM DIMM Memory kits.
Standard Memory Replaced
with Optional Memory
Up to 4096-MB of memory is available
with the removal of the standard 512-MB of memory and the optional installation
of PC3200 ECC DDR SDRAM DIMM Memory kits.
NOTE: Charts do
not represent all possible memory configurations.
Memory
Slot
4
3
2
1
Standard
512 MB
Empty
Empty
Empty
512 MB
Optional
3584 MB
1024 MB
1024 MB
1024 MB
512 MB
Maximum
4096 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from
HP:
256MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
354557 -B21
512MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
354560 -B21
1024MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 1024
MB)
System Leakage with all power supplies loaded
(mA)
0.75mA
System Inrush Current with all power supplies
loaded (A)
80A
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for
a fully configured system consisting of (1) CPU, (4) double-sided DIMMs,
(3) HDDs, (1) CD-ROM, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
354560-B21
© 2013 USA PartsDirect