Up to four HP ProLiant BL45p
server blades per 6U server blade enclosure
Performance quad processor
server blade designed for enterprise availability and scalability to
run existing 32-bit applications, while providing a simplified migration
path to 64-bit computing.
AMD Opteron™ 800 series single-core
and dual-core processors (quad capability)
Single-Core: Models 854 (2.8 GHz) and 852 (2.6
GHz)
HP ProLiant BL25/45p Dual
Port Fibre Channel Adapter (2-Gb) option for SAN connectivity (shared
with BL25p)
AMD 8131 and 8111 Chipsets
1024 MB or 2048 MB PC3200
Registered ECC 400MHz DDR memory, 2 x 1 Interleaved Memory, 16 DIMM
slots, expandable to 32 GB (using optional PC3200 DDR) or 64 GB max
(using optional PC2700 DDR)
Five total network ports:
Four (4) PCI-X Gigabit embedded ports consisting
of two (2) NC7781 and one (1) dual port NC7782
One additional 10/100 NIC dedicated to iLO Management
Smart Array 6i - Integrated
(on system board) RAID controller with optional battery-backed write
cache
U320 SCSI Drive Cage (standard)
supports up to two U320 hot plug hard disk drives
Integrated Lights-Out (iLO)
Advanced Management (ASIC on system board)
Plugs vertically into 6U enclosure,
four (4) BL45p server blades per enclosure
Integrated Access Tool for
server blade management and enhanced server blade documentation including
Best Practices and Common Procedures guides
Protected by HP Services and
a worldwide network of resellers and service providers. Three-year Next
Business Day, on-site limited global warranty. Certain restrictions
and exclusions apply. Pre-Failure Notification on processors, memory,
and SCSI hard drives.
Dual-Core AMD Opteron™
processor Model 885 (2.6 GHz/1MB L2 cache per core for 2MB total/1 GHz HyperTransport)
Dual-Core AMD Opteron™ processor
Model 880 (2.4 GHz/1MB L2 cache per core for 2MB total/1 GHz HyperTransport)
Dual-Core AMD Opteron™ processor
Model 875 (2.2 GHz/1MB L2 cache per core for 2MB total/1 GHz HyperTransport)
Dual-Core AMD Opteron™ processor
Model 870 ( 2.0 GHz/1MB L2 cache per core for 2MB total/1 GHz HyperTransport)
Dual-Core AMD Opteron™ processor
Model 865 (1.8 GHz/1MB L2 cache per core for 2MB total/1 GHz HyperTransport)
Upgradeability
Upgradeable to quad processing
Cache Memory
1MB Level 2 Cache per core
(2MB total for Dual-Core models)
Chipset
AMD 8131 and 8111 chipsets
Memory
Type
2-way interleaved PC3200 DDR
SDRAM running at 400 MHz or PC2700 DDR SDRAM running at 333 MHz
Standard
1024 MB 400 MHz PC3200
(depending on model)
2048 MB 400 MHz PC3200
(depending on model)
Maximum
64 GB max (using optional 333
MHz PC2700 DDR)
32 GB max (using optional 400 MHz PC3200 DDR)
NOTE:
Memory must be installed in pairs. NOTE: PC2700 and PC3200 memory should not be mixed within the server
blade and is not an HP supported configuration.
Network Controller
Five network ports total:
Four (4) PCI-X Gigabit embedded
ports consisting of two (2) NC7781 and one (1) dual port NC7782
One 10/100 iLO NIC dedicated to management
NOTE: Must use
a HP BladeSystem p-class server blade enclosure with enhanced backplane
to utilize all four NIC ports (HP P/N's 281404-B22, 243564-B22 or 380625-B22).
Expansion Slots
No PCI slots; all features are
integrated
I/O cable connectors:
(2)USB 1.1 ports, (1) video
port, (1) iLO port and (1) kernel debug port
(2) I/O cables ship with every
server blade enclosure
Tested USB devices (keyboard,
mouse, floppy) are listed in the "Options" section of this QuickSpecs
Integrated Manageability
Integrated Lights-Out (iLO)
Management Advanced (ASIC on the system board)
Internal Storage
Hard Drives
None ship standard
Maximum Internal
Storage
Hot Plug SCSI drive cage
600GB
2 x 300GB U320, hard drives
Graphics
Integrated ATI Rage XL Video
Controller with 8-MB SDRAM Video Memory
Graphics Resolution Supported
Resolution Color Depths
Depths 1280 x 1024, 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fiber Channel on the
HP ProLiant BL45p server blade
Two optional fiber channel adapters are supported by the HP ProLiant
BL45p. Both adapters are mezzanine circuit boards which connect directly
to the server blade system board. These optional fiber channel adapters
are available via option kits and must be ordered separately.
QLogic-based
Utilizes a QLogic chipset
The HP ProLiant BL25/45p dual-port Fibre Channel Adapter (P/N
381881-B21) is compatible with the HP ProLiant BL25p and BL45p server
blades. It cannot be used with an HP ProLiant BL20p or HP ProLiant
BL35p server blade.
Includes two small form factor pluggable transceivers with LC
connectors for installation into the Patch Panel 2, CGESM or GbE2
Interconnect Switch (with the Storage Connectivity Kit.)
Emulex-based
Utilizes an Emulex Thor chipset
The Emulex-based FC Mezzanine for HP p-Class BladeSystem dual
port Fibre Channel HBA (P/N 394588-B21) is compatible with the HP
ProLiant BL25p, 35p SATA model, and 45p server blades. It cannot
be used with an HP ProLiant BL20p or HP ProLiant BL35p SAS model
server blade.
There are no SFP's included in the Emulex mezzanine kit for use
with ProLiant BL p-Class Fibre Channel pass-through interconnects.
If you require SFPs for use with an Emulex mezzanine and a FC pass
through interconnect please order an SFP option kit (P/N 397577-B21)
which will provide 2 FC SFPs per option kit.
Two ports on each Dual-port Fibre Channel Mezzanine Card provide a
redundant Fibre Channel connection to each server blade
Supports up to 2 Gb/s Fibre Channel equipment
Compatible SAN
HP ProLiant BL45p server blades are optimized for StorageWorks arrays:
HSG80 (MA8000, EMA12000, EMA16000); EVA5000; EVA3000; XP48, XP128,
XP512, XP1024; HP StorageWorks Modular Smart Array 1000 and 1500
ProLiant Essentials Foundation Pack Software for the
ProLiant BL Server Blades
HP Systems Insight
Manger
HP Systems Insight Manager
(HP SIM) provides a unified, secure and extensible environment to
centrally manage servers, storage and other infrastructure devices
across multiple operating system platforms.
Through a single management view, HP SIM provides core management
services that include device discovery and identification, event
views, health monitoring, inventory data collection, software version
control and reporting. HP SIM is built on industry standards and
is extensible with value-added ProLiant Essentials, Integrity Essentials
and Storage Essentials software to meet individual management needs.
For more details on HP SIM visit http://www.hp.com/go/hpsim.
HP SIM provides organizations with the following benefits:
Simplifies and consolidates infrastructure lifecycle management
using task and query based functionality
Provides the foundation for infrastructure automation and virtualization
Enables IT management based on business processes not hardware
platforms
Lowers infrastructure maintenance cost and frees resources
for innovation
Maximizes resource utilization with virtualization technologies
Provides a central point of integration between infrastructure
and Enterprise management tools such as HP OpenView
ProLiant Essentials Rapid
Deployment Pack
Rapid Deployment Pack
(RDP) is an automated deployment and provisioning solution for all
ProLiant servers. RDP includes the Altiris Deployment Solution and
ProLiant Integration Module featuring ProLiant server pre-configured
events for OS installation, and optimized software drivers, firmware
and management agents. Every RDP CD includes 10-node trial licenses
for evaluation purposes. RDP requires a license for each server deployed
and is available for purchase with blade servers. For more information,
visit http://www.hp.com/servers/rdp.
Insight Management Agents
Insight Management Agents
should be installed on all HP servers to present system instrumentation,
health and configuration information into HP Systems Insight Manager
and the HP System Management Homepage. The HP System Management Homepage
aggregates systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers,
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed
using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack. For additional information about the Management
Agents and the HP System Management Homepage please visit the management
Web site at http://www.hp.com/servers/manage
Subscriber's Choice
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides software and driver change notifications for
ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ROMPaq, support software,
and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options, available in the RDP CD, SmartStart or downloadable from
Software and Drivers download pages, linked from the SmartStart website
at http://www.hp.com/go/support
Insight Diagnostics
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at
your fingertips, available in SmartStart.
Optional software offerings that selectively extend the functionality
of an Adaptive Infrastructure to address specific business problems and
needs:
Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route based
on network conditions, plus it provides an extra layer of protection.
The virus throttle feature of the solution slows the propagation of
fast spreading virus.
Performance Management Pack - a performance management solution that
identifies and explains hardware performance bottlenecks on ProLiant
servers and attached options enabling users to better utilize their
valuable resources.
Rapid Deployment Pack (RDP) is an automated deployment and provisioning
solution for all ProLiant servers. RDP includes the ProLiant Integration
Module featuring ProLiant server pre-configured events for OS installation,
and optimized software drivers, firmware and management agents. Every
RDP disc includes 10-node trial licenses for evaluation purposes. RDP
requires a license for each server deployed and is available for purchase
with HP servers. For more information, visit: http://www.hp.com/servers/rdp.
Virtualization Management Software - Get the most out of server virtualization
by unifying the management of physical and virtual servers in HP Systems
Insight Manager. The Virtual Machine Management Pack plug-in provides
central management and control of VMware and Microsoft virtual machines
and provides physical host to virtual machine association. The Server
Migration Pack plug-in automates the manual task of migrating servers
between physical or virtual platforms
Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well operating
system configurations that can be exploited by viruses, worms, and other
blended threats
Workload Management Pack - provides easier management of complex environments,
improving overall server utilization and enabling Windows® 2000 customers
for the first time to confidently deploy multiple applications on a
single multiprocessor ProLiant Server.
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
SmartStart
SmartStart is a tool that simplifies single server setup, providing a
rapid way to deploy reliable and consistent server configurations. SmartStart
can now deploy the ProLiant BL45p server blades using the I/O port with
an attached USB CD-ROM device. To obtain a copy of SmartStart for your
blade server, redeem the coupon that is included with your Blade server
or order your copy from the SmartStart web site. For more information,
please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
OS Support Single-Core
NOTE:
2.8 GHz and 2.6 GHz models
Microsoft Windows 2000 Server Microsoft Windows 2000 Advanced Server
Windows Server 2003, Standard Edition Windows Server 2003, Enterprise Edition
Red Hat Enterprise Linux 3 Red Hat Enterprise Linux 4 Update 2 (or greater)
SuSE Linux Enterprise Server 8 SuSE Linux Enterprise Server 9 Solaris 10
32/64-bit
Microsoft Windows 2000 Server (licensed by core) Microsoft Windows 2000
Advanced Server (licensed by core) Windows Server 2003, Standard Edition (licensed
by processor socket) Windows Server 2003, Enterprise Edition (licensed by
processor socket) Red Hat Enterprise Linux 3 Update 5 (or greater) Red
Hat Enterprise Linux 4 Update 2 (or greater) SuSE Linux Enterprise Server
9 SP1 (or greater) Solaris 10 32/64-bit NOTE: For a complete and up-to-date listing of supported OSs and versions,
please visit our OS Support Matrix at: http://www.hp.com/go/supportos. NOTE: For an up-to-date listing of the latest drivers available for the
HP ProLiant BL p-Class, please see: http://h18004.www1.hp.com/support/files/server/us/family/model/5342.html. NOTE: For a more complete and up-to-date information on Linux support,
please visit HP Linux Web site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
Integrated Lights-Out Advanced
(iLO)
Virtual Text and Graphical Remote Console*
Virtual CD-ROM*
Virtual Floppy*
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
Automatic Server Recovery-2 (ASR-2)
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server and Interconnect Switch Health Logs
Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Interconnect Switch Management System and Utilities (Interconnect Switch
option)
Integrated Management Log (IML)
Dynamic sector repairing and drive parameter tracking (with Smart Array
controllers)
Network adapter teaming set-up utility *NOTE: Advanced features such as
Graphical Remote Console and Virtual Floppy are included with the BL p-Class
server.
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug Ultra320 SCSI hard disk drive bays and integrated hardware
RAID (Smart Array 6i) on every server blade (Battery-backed write cache
is optional.)
Redundant ROM on each server blade
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing,
switch-assisted load balancing)
Interconnects Switch Availability
Hot-plug and hot- remove with configuration
retention and no need to cable/re-cable
Two network connections per server blade bay
(four NICs total) routed to two redundant interconnect switches
Redundant Ethernet inter-switch communication
with two sets of redundant Ethernet uplink ports per each interconnect
switch
Redundant front panel ports per each
interconnect switch for diagnostics, management, and additional uplinks
Redundant serial ports
Compatibility with PVST+ (CGESM or GbE2 switch)
and 802.1D Spanning tree protocol support for loop-free path redundancy
Static IEEE 802.3ad (EtherChannel compatible)
trunking with automatic port load balancing and failover
Redundant configuration files and operating
system firmware images in memory (GbE2 switch)
Redundant fans per each interconnect switch
Redundant 1+1 power to each interconnect switch
Support for ProLiant network adapter teaming
Redundant configurable community strings and
SNMP trap manager hosts
Redundant configurable syslog server, DNS server, and default gateways
(GbE2 switch)
Security
Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
Service
and Support
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of resellers and service providers.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements
NOTE: Server Blade Limited Warranty
includes 3 year Parts, 3 year Labor, 3-year on-site support. This warranty
supports the HP ProLiant BL20p, HP ProLiant 25p, and HP ProLiant 45p Server
Blades. NOTE: Server Blade Limited Warranty includes 3 year Parts, 1 year
Labor, 1-year on-site support. This warranty supports the HP ProLiant
35p Server Blades. NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts,
3 year Labor, 3-year on-site support. NOTE: Server Blade Interconnect Limited Warranty includes 3 year
Parts, 3 year Labor, 3-year on-site support. NOTE: The p-Class SAN switch limited warranty s is unique to the
SAN switch which includes 1 year warranty that is upgradeable to 3 years
via Care Pack
The HP Care Pack service part numbers below for ProLiant BL p-Class server
blades, cover the server blade and all HP branded hardware options qualified
for the server, purchased at the same time or afterwards, internal to
the server.
HP Care Pack services for HP BladeSystem p-Class server blade enclosure
covers the enclosure including patch panels, HP supported Ethernet interconnects,
power enclosure with power supplies and power distribution.
HP services provide continuous care and support expertise with committed
response designed to meet your IT and business needs.
To fully capitalizing on your HP BladeSystem servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a HP BadeSystem server support offer to help you speedily
deploy and maximize system uptime.
Enhanced Care - Minimum recommended service support offer designed to
ensure customers have access to expert assistance, whenever they need
it.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years.
Continuance Care - Recommended service delivering cost-effective support
options designed to extend HP Services committed response and guaranteed
fix times, designed to speed problem identification and resolution.
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years.
Total Care - Highest HP Support service level recommend to help increase
IT performance and availability with comprehensive, integrated hardware
and software services.
Support Plus 24 - Onsite HW support 24x7, 4hr response and Microsoft O/S
SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response
time incl. HP holidays.
Deployment Services - HP Installation and Start Up services designed to
take time, risk, and worry out of the deployment of HP BladeSystem servers
- and free customers IT support staff to focus on what they do best, their
business.
Installation & Start-Up service for HP BladeSystem Infrastructure
plus HP BladeSystem Enhanced Network Installation and Start-UP as per
the Customer Description and/or Data Sheet. To be delivered on a scheduled
basis 8am-5pm, M-F, excl. HP holidays.
Configuration Information - Factory Integrated Models (North America only)
NOTE:
For Configure to Order requirements within EMEA region, please consult local Sales
Contact. NOTE: HP does not allow factory integration of options into
standard models listed above. Configure-to-order servers must start with
a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Server Blade Configuration
Models
HP
ProLiant BL45p MOD-FX (US)
390604-405
Configurable
Model ships with:
Two (2) PCI-X Gigabit
embedded ports consisting of one (1) NC7782 Gigabit Dual Port PCI-X LOM
One additional 10/100
NIC dedicated to iLO Management
Smart Array 6i Controller
(integrated on system board)
Step 2: Choose
Required Options (one of the following from each list unless otherwise noted):
Processors
AMD Opteron™ 854 2.8 GHz-1M SC FIO BL45p NOTE: If 2 processors are
desired, select one 397816-B21 and one 397816-B21 NOTE: If 4 processors are desired, select one 397816-B21 and three
397816-B21
397816-B21
AMD Opteron™ 852 2.6 GHz-1M SC FIO BL45p NOTE: If 2 processors are desired, select one 390603-B21 and one
390603-B21 NOTE: If 4 processors are desired, select one 390603-B21 and three
390603-B21
AMD Opteron™ 280 2.4 GHz-1M per core DC FIO BL45p NOTE: If 2 processors are desired, select one 399605-B21 and one
399605-B21 NOTE: If 4 processors are desired, select one 399605 -B21 and three
399605-B21
399605-B21
AMD Opteron™ 865 1.8 GHz-1M per core DC FIO BL45p NOTE: If 2 processors are desired, select one 390605-B21 and one
390605-B21 NOTE: If 4 processors are desired, select one 390605 -B21 and three
390605-B21
390605-B21
AMD Opteron™ 870 2.0 GHz-1M per core DC FIO BL45p NOTE: If 2 processors are desired, select one 390606-B21 and one
390606-B21 NOTE: If 4 processors are desired, select one 390606-B21 and three
390606-B21
AMD Opteron™ 875 2.2 GHz-1M per core DC FIO BL45p NOTE: If 2 processors are desired, select one 392221-B21 and one
392221-B21 NOTE: If 4 processors are desired, select one 392221-B21 and three
392221-B21
HP
BL45p O885 2.6GHZ DC FIO Kit NOTE: If 2 processors are desired, select one 406433-B21 and one
406433-B21 NOTE: If 4 processors are desired, select one 406433-B21 and three
406433-B21
NOTE:
Must select one communications adapter, either the HP ProLiant BL25p/35/45p
NIC Mezzanine or the HP ProLiant BL25p/35p/45p Dual NC370i Multifunction
Network Adapter.
HP ProLiant BL25/35/45p
NIC Mezz FIO Base NOTE: HP ProLiant BL25p/35/45p NIC
Mezz contains two (2) NC7781 single port Gigabit NICs.
382850-B21
Or upgrade to:
HP ProLiant BL25p/35p/45p
Dual NC370i Multifunction Network Adapter NOTE: Accelerated iSCSI is not yet
supported for Linux environments; RDMA and iSCSI boot is not yet supported
for Windows or Linux environments. Future support is planned for all of
these features.
384043-B21
NOTE:
A minimum of 1 GB of memory per port is required for NC370x adapters, with
a maximum of two NC370x ports permitted in a server.
Step 3: Choose
Additional Options for Factory Integration
NOTE:
For additional options, including server blade enclosure with enhanced backplanes,
interconnect options and power subsystem options; please refer to the "Options"
section below.
ProLiant Essentials
Intelligent Networking PackWindows Edition and Linux Edition
ProLiant Essentials
Intelligent Networking Pack - Windows Edition, Single Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
ProLiant Essentials
Intelligent Networking Pack Linux Edition, Single Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
ProLiant Essentials
Performance Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation. NOTE: The most recent version of the software can always be downloaded
at http://www.hp.com/products/pmp.
ProLiant Essentials
Server Migration Pack, Single-Migration License NOTE: Contains one license, enabling
1 server migration, with a unique license activation key and documentation. NOTE: This license allows 1 server to be migrated from a physical
server to a virtual machine. Or this license can be used to migrate a virtual
machine from one virtualization layer i.e. VMware GSX to a different virtualization
layer such as VMware ESX or Microsoft Virtual Server 2005.
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
ProLiant Essentials
Vulnerability and Patch Management Pack
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
HP Control Tower
BladeSystem p-class Management Software
HP Control Tower for HP BladeSystem,
Single Server License. No media included. NOTE: For use with a single blade
server. Contains one license with a single unique license activation key.
412957-B21
HP Control Tower for HP BladeSystem,
Eight-pack (8-pack) Server License. No media included. NOTE: For use with eight (8) blade
servers. Contains eight (8) licenses with a single unique license activation
key.
412958-B21
HP Control Tower for HP BladeSystem,
Flexible License. No media included. NOTE: For use with multiple servers
(minimum of 5). This part number can be used to purchase multiple licenses
with a single activation key. The quantity ordered for this part number
will be the quantity of licenses included in the kit in the form of a corresponding
activation key. Use the same key to activate all licenses in the actual
quantity ordered. For a given order, one kit will be delivered with the
activation key.
412959-B21
Processors
Single-Core AMD Opteron™ Model
854 processor 2.8 GHz/1 M
397816-B21
Single-Core AMD Opteron™ Model
852 processor 2.6 GHz/1 M
HP ProLiant BL25/35/45p Dual NC370i
Multifunction Network Adapter NOTE: Accelerated iSCSI is not yet
supported for Linux environments; RDMA and iSCSI boot is not yet supported
for Windows or Linux environments. Future support is planned for all of
these features.
384043-B21
NOTE: A minimum
of 1 GB of memory per port is required for NC370x adapters, with a maximum
of two NC370x ports permitted in a server.
NOTE: Please see
the following Controller QuickSpecs for Technical Specifications such as
PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak
Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information: http://h18000.www1.hp.com/products/quickspecs/12030_div/12030_div.HTML
(Smart Array 6i)
ProLiant BL45p
Fibre Channel Adapter (shared with the BL25p)
Emulex based BL25/35/45p Dual
Port Fibre Channel HBA NOTE: SFPs for use with pass through
SAN switches not included with the Emulex based Fibre Channel Mezzanine
card. If SFPs required please order the SFP option kit (P/N 397577-B21)
which includes 2 2Gb SFPs per option kit.
394588-B21
HP 2-2Gb SFP for Fibre Channel
pass through kit NOTE: Must select if SFP for use
with pass through SAN switches is required when ordering Emulex based Fibre
Channel Mezzanine card for HP p-Class BladeSystem (P/N 394757-B21).
QLogic based Dual port Fibre Channel
Adapter (2-Gb) for ProLiant BL25/45p NOTE: When using this card, the Patch
Panel 2, CGESM, or GbE2 Interconnect Switch (with Storage Connectivity Kit)
must be used to provide the Fibre Channel pass through. NOTE: Supports BL25p/45p only.
HP BladeSystem p-Class Diagnostic
Station NOTE: The Diagnostic Station allows
access to the HP ProLiant p-Class server blades and the BL p-Class interconnect
switch outside of the server blade enclosure. The option provides power
and a data interface so that "offline" upgrade and diagnostic functions
may be performed.
HP BladeSystem p-Class Diagnostic
Station Upgrade Kit for the HP ProLiant BL45p server blade.
309329-B21
Tape Libraries
HP StorageWorks MSL6000
Tape Library
Ultrium 960 technology
HP StorageWorks MSL6030 1 Ultrium
960 Dr LVDS Library
AD606B
HP StorageWorks MSL6030 1 Ultrium
960 Dr FC Library
AD608B
HP StorageWorks MSL6030 2 Ultrium
960 Dr LVDS Library
AD607B
HP StorageWorks MSL6030 2 Ultrium
960 Dr FC Library
AD609B
Ultrium 460 technology
HP StorageWorks MSL6030 1 Ultrium
460 Dr LVDS Library
AD598B
HP StorageWorks MSL6030 1 Ultrium
460 Dr FC Library
AD600B
HP StorageWorks MSL6030 2 Ultrium
460 Dr FC Library
AD601B
NOTE: Please reference
the MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
NOTE: Please reference
the VLS Tape Libraries QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution. Reference
current compatibility information at http://www.hp.com/go/ebs
NOTE: Please see
the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options
and configuration information at: http://www.hp.com/go/MSA1500cs
HP Rack 10842 (42U, 800mm wide)
Rack Cabinet - Pallet NOTE: Server Blade Enclosures must
be field integrated into the 10842 racks. Factory integration of Server
Blade Enclosures into the 10842 is not supported.
HP Rack 10842 (42U, 800mm wide)
Rack Cabinet - Shock Pallet NOTE: Server Blade Enclosures must
be field integrated into the 10842 racks. Factory integration of Server
Blade Enclosures into the 10842 is not supported.
NOTE: xxxxxx-B21
(pallet) used to ship empty racks shipped on a truck. xxxxxx-B22 (shock
pallet) used to ship racks with equipment installed (by custom systems,
VARs and Channels). xxxxxx-B23 (crated) used for air shipments of empty
racks. NOTE: It is mandatory to use a shock pallet in order to ship racks
with equipment installed.
Serial Interface Adapter, 1-pack
with power supply
373045-B21
NOTE: Cat5e cables
are required to connect Interface Adapters to Consoles Switches. Cat52 cables
can be found at the following URL: http://www.hp.com/go/kvm
HP 1x4 USB/PS2 KVM Switch, TT
(NA/JPN)
371301-D71
HP 1x4 USB/PS2 KVM Switch, TT
(AU/NZ)
371301-011
HP 1x4 USB/PS2 KVM Switch, TT
(UK)
371301-031
HP 1x4 USB/PS2 KVM Switch, TT
(EU)
371301-A21
HP 1x4 USB/PS2 KVM Switch, RM
(ALL)
371302-B21
HP PS2 KVM Cable with audio, 6'-2-pack
371730-B21
HP USB KVM Cable with audio, 6'-2-pack
371729-B21
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm
NOTE: Cat5e cables are required to connect Serial
Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e
cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see
the following URL: http://www.hp.com/go/kvm.
Service
and Support Offerings (HP Care Pack Services)
NOTE:
The HP Care Pack service part numbers below for HP BladeSystem p-Class
server blades, cover the server blade and all HP branded hardware
options qualified for the server, purchased at the same time or
afterwards, internal to the server.
Hardware Services On-site
Service
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
UD187E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
UD188E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UD189E
NOTE: The
HP Care Pack service part numbers below for HP BladeSystem p-Class
server blade enclosure covers the enclosure including patch panels,
HP supported Ethernet interconnects, power enclosure with power supplies
and power distribution.
Hardware Services On-site
Service
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
HC031E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
HC032E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
HC033E
NOTE: The
HP Care Pack service part numbers below covers the HP BladeSystem
Brocade and McData SAN Switches.
Hardware Services On-site
Service
Next Business Day On-site
Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
UC007E
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
UC008E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
UC009E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UC023E
Installation & Start-up Services
HP Installation & Startup
Service for HP BladeSystem Infrastructure NOTE: provides for an integrated
hardware and software implementation that includes remote service
planning, onsite deployment of hardware and software, installation
verification testing and customer orientation. Hardware deployment
covers the installation of a single BladeSystem enclosure that include
server blades (up to 16), Ethernet network interconnect, and power
options. Software deployment covers the installation and configuration
of HP Systems Insight Manager (SIM), HP Rapid Deployment Pack (RDP),
and deploy up to two operating system editions of either Windows or
Linux, using scripted operating system installation software.
UC905E
ProLiant BL p-Class Blade
Server Hardware Installation, Electronic
UA219E
HP BladeSystem p-Class Enclosure
and Server Blade Hardware Installation, Electronic
U4971E
Installation and Start-up
of Rapid Deployment Pack, Electronic NOTE: Provides for the installation
on a Customer supplied server designated as a Deployment Server. Includes
the deployment of a single server. This new server will be deployed
using either one of the pre-configured scripts or an image. In addition,
the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To
be delivered during standard office ours, standard office days.
U5683E
Provides for the Installation
and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment
Pack (Basic) (Electronic)
UA042E
HP ProLiant Essentials Vulnerability
and Patch Management Pack Installation and Startup Service. (Electronic) NOTE: Service coverage: onsite
installation of the Vulnerability and Patch Management (VPM) software
on a customer designated server, configuration of the VPM software
to acquire security patches, enabling the VPM software to scan up
to five (5) systems, applying the security patches to the designated
servers, generating a report from VPM that shows the vulnerability
assessment results, and providing customer with an orientation to
the software.
UC929E
Provides for the Installation
and Start-up of System Insight Manager (Electronic)
UA041E
Provides for the Installation
and Start-up of System Insight Manager (Electronic)
All DIMMs must be either PC3200 DDR 400 MHz SDRAM
DIMMS or PC2700 DDR 400 MHz SDRAM DIMMS.
Both DIMM slots in a memory bank must be populated.
Both DIMM slots in a memory bank must be identical.
Processor 1 memory bank 1 must always be populated.
Populate DIMMs beginning with the farthest slots
from the processor, starting with the SMALLEST DIMMs first, moving in
towards the processor.
If only installing 1 GB DIMMs, ensure that the Dual
Rank DIMMs are installed closest to the processor. Dual Rank can be
determined by looking for the "2R" or "2Rx8" wording
on the label of the DIMM.
For optimal performance in most applications, populate
memory bank 1 for every populated processor socket.
DIMM banks are active only when the corresponding
processor socket is populated.
Standard Memory 2048 MB PC3200 Registered DDR SDRAM
DIMM installed (4 x 512 MB SDRAM DIMM)
Standard Memory Plus Optional Memory Up to 26624 MB of DDR SDRAM DIMM memory is available with the installation
of optional DDR SDRAM DIMM memory expansion kits (requires four processors
to be installed).
Standard Memory Replaced with Optional Memory Up to 32768 MB of DDR SDRAM DIMM memory is available with the removal
of standard memory and the installation of optional SDRAM DDR DIMM memory
expansion kits (requires four processors to be installed).
Up to 65536 MB of PC2700 DDR SDRAM DIMM memory is available
with the removal of standard memory and the installation of optional PC2700
DDR SDRAM DIMM memory expansion kits (requires four processors to be installed).
Standard Memory 1024 MB PC3200 400MHz Registered DDR
SDRAM DIMM installed
Standard Memory Plus Optional Memory
Up to 26624 MB of DDR SDRAM DIMM memory is available with the installation
of optional DDR SDRAM DIMM memory expansion kits (requires four processors
to be installed).
Standard Memory Replaced with Optional Memory
Up to 32768 MB of DDR SDRAM DIMM memory is available with the removal
of standard memory and the installation of optional DDR SDRAM DIMM memory
expansion kits (requires four processors to be installed).
Up to 65536 MB of PC2700 DDR SDRAM DIMM memory is available
with the removal of standard memory and the installation of optional PC2700
DDR SDRAM DIMM memory expansion kits (requires four processors to be installed).
3.425 x 10.29 x 28.00 in (8.699
x 26.14 x 71.1 cm)
Weight (maximum)
36 lb (16.33 kg)
Temperature Range*
Operating
50° to 95° F (10°
to 35° C)
Shipping
-40° to 140° F (-40°
to 60° C)
Storage
-4° to 140° F(-20°
to 60° C)
Maximum Wet Bulb Temperature
86° F (30° C)
Relative Humidity
(non-condensing)**
Operating
10% to 90%
Shipping
10% to 90%
Storage
10% to 95%
*NOTE:
All temperature ratings shown are for sea level. An altitude derating
of 1°C per 304.8 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is
applicable. No direct sunlight allowed. Upper operating limit is 3,048m
(10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000
ft) or 30.3 KPa/4.4 psia.
**NOTE: Storage maximum humidity of 95% is based on a maximum temperature
of 45°C (113°F). Altitude maximum for storage corresponds to a pressure
minimum of 70 KPa.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
380625-B22
© 2013 USA PartsDirect