The Compaq ProLiant™ ML350 Generation 2 (G2) 2-way rack or tower server
delivers affordable performance and essential availability to corporate workgroups and
growing businesses
IntelÒ Pentium lll 1.40 GHz, or 1.26 GHz FC-PGA2 (Flip
Chip-Pin Grid Array) processor (dual processor capability) with 512-KB second level ECC
cache standard (full speed)
Array Models ship with the Smart Array 532 Controller and 256-MB SDRAM Memory standard
ServerWorks LE 3.0 Chipset with 133-MHz Front Side Bus
128-MB or 256-MB (Array Models) PC133-MHz Registered ECC SDRAM DIMM memory standard,
expandable to 4-GB
133-MHz GTL Bus Design
Six available PCI slots: five 64-bit/33-MHz PCI, one 32-bit/33-MHz PCI, two USB ports
Integrated Dual Channel Wide Ultra3 SCSI Adapter
Compaq NC3163 Fast Ethernet NIC (embedded) PCI 10/100 WOL (Wake On LAN)
Support for up to six 1² Wide Ultra3 SCSI hot plug hard
drives
Internal storage capacity of up to 1.174-GB (6 x 146.8 GB 1²
+ 2 x 146.8 GB 1²)
350W Hot-Pluggable Power Supply (standard) and an optional 350W Hot-Pluggable Redundant
Power Supply available
Standard 6 x 1² Wide Ultra2/Ultra3 Hot Plug Drive Cage
Tool-free entry to chassis and access to components
RBSU (ROM based setup utility) support, redundant ROM
Insight Manager™, SmartStart™, ROM-based BIOS Setup Utility, and
Automatic Server Recovery (ASR-2)
Protected by HP Services, including a three-year, Next Business Day on-site, limited,
Global warranty and extended Pre-Failure Warranty that covers processors, memory and disk
drives — Certain restrictions and exclusions apply. Consult the Customer Support
Center at 1-800-345-1518 for details.
1.174 TB
(6 x 146.8 GB 1² with standard internal hot plug drive cage +
(2 x 146.8 GB 1² ) with optional ML3xx Internal Two Bay Hot
Plug SCSI Drive Cage)
External Storage
Two
external SCSI knockouts available, but requires optional ProLiant ML350 Internal to
External SCSI Cable Option Kit (PN 159547-B22)
Insight
Manager 7 helps maximize system uptime and performance and reduces the cost of maintaining
the IT infrastructure by providing proactive notification of problems before those
problems result in costly downtime and reduced productivity. Insight Manager 7 is easy to
set up and provides rapid access to detailed fault and performance information gathered by
the Management Agents. One-click-access to the Remote Insight Lights Out Edition board
allows systems administrators to take full graphical control of ProLiant servers in remote
locations or lights-out data centers. Finally, Insight Manager 7 in concert with the
Version Control Agents and Version Control Repository Manager enables systems
administrators to version manage and update system software across groups of ProLiant
servers.
Management Agents
The
Management Agents form the foundation for HP’s Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into HP
servers, workstations, desktops, and portables, and send alerts to Insight Manager 7 and
other enterprise management applications in case of subsystem or environmental failures.
For additional information about the Management Agents and other management products from
HP, please visit the management website at http://www.hp.com/servers/manage.
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable and
consistent server configurations. For more information, please visit the SmartStart
website at http://www.hp.com/servers/smartstart. SmartStart version supported
(minimum): SmartStart 5.20
ActiveUpdateä
ActiveUpdate
is a web-based application that keeps IT managers directly connected to HP for proactive
notification and delivery of the latest software updates.
ROMPaqä, support software, and configuration utilities
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant server
and options.
Survey Utility and
diagnostics utilities
The most
advanced configuration analysis, reporting and troubleshooting utilities used by HP and at
your fingertips.
Optional
ProLiant Essentials Value Packs
Optional
software offerings that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and
provisioning, enabling companies to quickly and easily adapt to changing business demands.
Workload Management Pack – provides easier management of complex environments,
improving overall server utilization and enabling WindowsÒ
2000 customers for the first time to confidently deploy multiple applications on a single
multiprocessor ProLiant Server.
Recovery Server Option Pack – entry-level high availability software that will
provide reliable protection and increased uptime against server hardware and operating
system failures.
Performance Management Pack – a performance management solution that identifies and
explains hardware performance bottlenecks on ProLiant servers and attached options
enabling users to better utilize their valuable resources.
Note: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to http://www.hp.com/servers/ProLiantessentials or the various ProLiant Essentials Value Pack
product QuickSpecs for more information.
Note: For more information regarding ProLiant
Essentials Software, please see the following URL:
Note: These Web sites are available in English only.
Industry Standard Compliance
ACPI V1.0B
Compliant
PCI 2.2
Compliant
PXE
Support
WOL
Support
MicrosoftÒ Logo certifications
Manageability
Insight
Manager 7
Redundant ROM
Remote Flash ROM
Remote Insight Lights-Out Edition (optional)
ProLiant RBSU (ROM-Based Setup Utility)
Automatic Server Recovery-2 (ASR-2)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and hard drives)
Security
Power-on
password
Setup password
Diskette boot control
Parallel and serial interface control
Disk configuration lock
Power switch security
Server
Power Cords
One
Lowline power cord ships standard.
Note: Country specific power cords ship with
all ProLiant ML350 G2 Models.
Power
Supply
350
Watts, Power Factor Correction (PFC), Hot Plug 100 to 240 VAC Rated Input Voltage
(Auto-sensing), CE Mark Compliant.
Note: Power Supply and optional Hot
Plug Redundant Power Supply are shipped with their own fan.
Note: Optional Hot Plug Redundant Power Supply available (PN 237046-001).
System
Fans
1 fan
ships standard. 1 total supported internally.
The increasing power of new high-performance processor technology requires increased
cooling efficiency for rack-mounted servers. The Compaq 9000 and 10000 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with
servers using the latest processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in
Compaq Rack 7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)),
the new processor technology requires the installation of High Airflow Rack Door Inserts
( 327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced
airflow for maximum cooling.
CAUTION: If a third-party
rack is used, observe the following additional requirements to ensure adequate airflow and
to prevent damage to the equipment:
Front and rear doors:
If your 42U server rack includes closing front and rear doors,
you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to
bottom to permit adequate airflow (equivalent to the required 64 percent open area for
ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 7 cm (2.75 inches).
CAUTION: Always use blanking panels to fill all remaining empty front panel
U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
Note:
For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section
at the following URL: http://h18004.www1.hp.com/products/servers/proliantml350/index.html
Service and Support
HP
Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage
of hard drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. HP technical assistance is available 7x24, toll free in the United
States and Canada. Telephone support services may be covered under warranty or available
for an additional fee.
Note: Limited Warranty includes 3 year Parts,
3 year Labor, 3-year on-site support.
A full range of CarePaqäpackaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
Note: For more information,
customer/resellers can contact
ProLiant Essentials Performance
Management Pack v2.0, Single License
306696-B21
Note: Flexible
and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer
to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials
Value Pack product QuickSpecs for more information.
Note: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.hp.com/servers/proliantessentials.
Note: These Web sites are available in English only.
Software
HP digital asset protection
302316-001
NetServer to ProLiant
integrations services
HP NetServer to ProLiant
integration and assessment service
Note: HP identifies current levels of
NetServer support, services, and management. This service helps maximize customer’s
ability to add ProLiant platforms into their current environment.
304164-002
HP TopTools to Insight Manager 7
installation and startup service
Note: Provides on-site review,
installation and configuration services for Insight Manager 7. HP will also re-create, as
closely as possible, the views and reports from the customer’s current TopTools
configuration. This service assures a smooth transition to the ProLiant Essentials
software.
304163-002
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
Note: Install and configure Rapid
Deployment Pack in a test environment, then deploy a server image to a maximum of 250
systems in the production environment. This service helps to assure successful system
deployment.
304162-002
Processor
Pentium III P1400-512KB Processor
Option Kit
Note: This processor option kit (PN
231118-B21) supports the ProLiant ML350 Generation 2 (G2), and ProLiant ML370 Generation 2
(G2) servers.
Pentium III P1133-512KB (FC-PGA2)
Processor Option Kit
Note: This processor option kit (PN
238888-B21) supports the ProLiant ML350 Generation 2 (G2), and ProLiant ML370 Generation 2
(G2) servers. It includes a heatsink and VRM.
ML3xx Two Bay Hot Plug SCSI Drive
Cage
Note: The drive cage option kit (PN
244059-B21) has one 1² drive bay and one 1.6² drive bay, installed in two available removable media bays.
Note: The Drive Cage must be shipped separately from your ML350 G2 server. Failure to do
so can cause damage to the ML350 G2 removable media drive bays.
Note:
All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds and will run at
U3 within the ML350 G2.
Note: Please see
the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating temperature:
U320 Hard Drive QS: http://www5.compaq.com/products/quickspecs/11531_na/
11531_na.html
256-MB Battery-Back Cache Module
Note: This 256-MB Battery-Backed Cache Module supports the Smart
Array 5300 series controllers, MSA 1000 and the Smart Array Cluster Storage.
Note:
In order to install certain tape drives internally, you may need to remove the rails that
come standard on the drives and then re-insert the screws in the mounting holes.
Note: Please see
the 20/40-GB DAT Tape Drive QuickSpecs for additional options such as host bus adapters,
controllers, cassettes, and for an up-to-date listing of the latest O/S Support details,
please see the following: http://www5.compaq.com/products/quickspecs/10426_na/
10426_na.html
Internal and External AIT
Tape Drives
Note:
The Internal AIT Hot Plug Drives are supported in the drive bay only. When installing an
AIT tape drive into an ML350 ProLiant server you must use the special screw included with
the drive kit in order for the drive to seat properly in the ML350 drive bay.
HP StorageWorks Internal AIT
35-GB, LVD Tape Drive (Carbon)
216884-B21
HP StorageWorks External AIT
35-GB, LVD Tape Drive (Carbon)
Note: Please see
the AIT 35-GB, LVD Tape Drive QuickSpecs for additional options such as adapters,
controllers, and cassettes, and for an up-to-date listing of the latest O/S Support
details, please see the following: http://www5.compaq.com/products/quickspecs/10712_na/
10712_na.html
HP StorageWorks AIT 50-GB Tape
Drive, Internal (Carbon)
157766-B22
HP StorageWorks AIT 50-GB Tape
Drive, External (Carbon)
157767-002
HP StorageWorks Internal AIT
50-GB, Hot Plug (Carbon)
Note: Please see
the AIT 50-GB Tape Drive QuickSpecs for additional options such as adapters, controllers,
and cassettes, and for an up-to-date listing of the latest O/S Support details, please see
the following: http://www5.compaq.com/products/quickspecs/10425_na/
10425_na.html
HP StorageWorks Internal AIT
100-GB Tape Drive (Carbon)
Note: Please see
the AIT 100-GB Tape Drive QuickSpecs for additional options such as adapters, controllers,
and cassettes, and for an up-to-date listing of the latest O/S Support details, please see
the following: http://www5.compaq.com/products/quickspecs/11062_na/
11062_na.html
Internal and External
DLT/SDLT Tape Drives
HP StorageWorks 40/80-GB DLT Tape
Drive, Internal (Carbon)
Note: Please see
the 40/80-GB DLT Drive QuickSpecs for additional options such as host bus adapters,
controllers, cassettes, and for an up-to-date listing of the latest O/S Support details,
please see the following: http://www5.compaq.com/products/quickspecs/10658_na/
10658_na.html
Internal and
External DLT VS Tape Drives
HP StorageWorks DLT VS 40/80 Tape
Drive, Internal (Carbon)
Note: Please see
the DLT VS 40/80 Tape Drive QuickSpecs for additional options such as host bus adapters,
controllers, cassettes, and for an up-to-date listing of the latest O/S Support details,
please see the following: http://www5.compaq.com/products/quickspecs/11403_na/
11403_na.html
HP StorageWorks Rackmount SDLT
110/220, 3U (Single Drive)
Note: Please see
the SDLT 110/220-GB Tape Drive QuickSpecs for additional options such as adapters,
controllers, and media, and for an up-to-date listing of the latest O/S Support details,
please see the following: http://www5.compaq.com/products/quickspecs/10772_na/
10772_na.html
Note: Please see
the SDLT 160/320-GB Tape Drive QuickSpecs for additional options such as adapters,
controllers, and media, and for an up-to-date listing of the latest O/S Support details,
please see the following: http://www5.compaq.com/products/quickspecs/11406_na/
11406_na.html
Note: Please see
the HP StorageWorks LTO Ultrium Tape Drive QuickSpecs for additional options such as
controllers, and other related items, and for an up-to-date listing of the latest O/S
Support details, please see the following: http://www5.compaq.com/products/quickspecs/11415_na/
11415_na.html
Internal and External
Ultrium 460 Tape Drive for ProLiant
HP StorageWorks Ultrium 460 Tape
Drive for ProLiant, Internal (Carbon)
Note: Please see
the HP StorageWorks Ultrium 460 Tape Drives for ProLiant QuickSpecs for additional options
such as data and cleaning cartridges, and for an up-to-date listing of the latest O/S
Support details, please see the following: http://www5.compaq.com/products/quickspecs/11530_na/
11530_na.html
Internal and External DAT
Autoloader
20/40-GB DAT 8 Cassette
Autoloader Internal (Opal)
20/40-GB DAT 8 Cassette
Autoloader External (Opal)
166505-001
20/40-GB DAT 8 Cassette
Autoloader External (Opal) (Int’l)
166505-B31
20/40-GB DAT 8 Cassette
Autoloader External (Opal) (Japan)
166505-291
Note: Please see
the 20/40-GB DAT DDS-4 8 Cassette Autoloader QuickSpecs for additional options such as
adapters, controllers, and cassettes, and for an up-to-date listing of the latest O/S
Support details, please see the following: http://www5.compaq.com/products/quickspecs/10518_na/
10518_na.html
AIT Autoloader
HP StorageWorks AIT 35 GB
Autoloader, Rackmount (Carbon)
280349-001
HP StorageWorks AIT 35 GB
Autoloader Tabletop (Carbon)
280349-001
Note: Please see
the AIT 35-GB Autoloader QuickSpecs for additional options such as adapters, controllers,
and cassettes, and for an up-to-date listing of the latest O/S Support details, please see
the following: http://www5.compaq.com/products/quickspecs/11404_na/
11404_na.html
HP StorageWorks 1/8
Autoloader
HP StorageWorks 1/8 Autoloader,
Tabletop, Ultrium 230
3U Rackmount Kit
Note: The 3U Rackmount Kit (PN 274338-B21) can
support up to (2) full-height or (4) half-height tape drives and compatible with multiple
Single-Ended and LVD SCSI Tape Drives including the 12/24-GB DAT, 20/40-GB DAT, 20/40-GB
DAT DDS-4 8 Cassette Autoloader, AIT 35-GB LVD, AIT 50 GB, 20/40-GB DLT, 40/80-GB DLT, and
the SDLT 110/220-GB Tape Drives.
5U Rackmount Kit
Note: The 5U Rackmount Kit (PN 274339-B21) can
support up to (4) full-height tape drives and is compatible with all Compaq DLT/SDLT tape
drives including the 20/40-GB DLT, 35/70-GB DLT, 40/80-GB DLT, and the SDLT 110/220-GB
tape drives.
Note: Please see
the SSL2020 Automated AIT Tape Library Solution QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for
a complete solution at: http://www5.compaq.com/products/quickspecs/10580_na/
10580_na.html
Note: Please see
the StorageWorks MSL5026DLX or MSL5026SL Library QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for
a complete solution at: http://www5.compaq.com/products/quickspecs/10860_na/
10860_na.html
MSL5026SL, Tabletop, 1 SDLT
Drive (Graphite)
302511-B21
MSL5026SL, Tabletop, 2 SDLT
Drives (Graphite)
302511-B22
MSL5026SL, Rackmount, 1 SDLT
Drive (Graphite)
302512-B21
MSL5026SL, Rackmount, 2 SDLT
Drive (Graphite)
302512-B22
Note: Please
see the StorageWorks MSL5026SL Library QuickSpecs for additional information including
UpgradeKits, Accessories, and SCSI Cable Kits and additional options needed for a complete
solution at: http://www5.compaq.com/products/quickspecs/11440_na/
11440_na.html
Note: Please see
the StorageWorks MSL5026S2 Library QuickSpecs for additional information including Upgrade
Kits, Accessories, and SCSI Cable Kits and additional options needed for a complete
solution at: http://www5.compaq.com/products/quickspecs/11453_na/
11453_na.html
Note: Please see
the StorageWorks MSL5052SL Library QuickSpecs for additional information including Upgrade
Kits, Accessories, and SCSI Cable Kits and additional options needed for a complete
solution at: http://www5.compaq.com/products/quickspecs/11061_na/
11061_na.html
Note: Please see
the StorageWorks MSL5052S2 Library QuickSpecs for additional information including Upgrade
Kits, Accessories, and SCSI Cable Kits and additional options needed for a complete
solution at: http://www5.compaq.com/products/quickspecs/11442_na/
11442_na.html
Note: Please see
the StorageWorks MSL5030 LTO Library QuickSpecs for additional information including
Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for a
complete solution at: http://www5.compaq.com/products/quickspecs/11439_na/
11439_na.html
Note: Please see
the StorageWorks MSL5060 LTO Library QuickSpecs for additional information including
Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for a
complete solution at: http://www5.compaq.com/products/quickspecs/11438_na/
11438_na.html
Note: 128-MB
Cache Module for Smart Array 5302 Controller
(PN 153506-B21) is an upgrade cache module (128 MB Standard) for Smart Array Cluster
Storage Controller.
Note: Please see the Compaq Smart Array Cluster Storage QuickSpecs for additional
information including configuration steps and additional options needed for a complete
solution at: http://www5.compaq.com/products/quickspecs/11050_na/
11050_na.html
Rack-Mountable PDUs –
1U/0U (up to 12 outlets)
Note: 0U mounting brackets shipped with the
unit (separate option kit for 1U mounting).
Compaq Power Distribution
Unit-16A (200 to 240V)
Note: The 16A PDU also connects to the
high volt models of the UPS R3000 XR (need cable
PN 340653-001) and the UPS R6000 models. Cable PN 340653-001 required if connecting to UPS
R3000 XR ( 192186-002 -High Volt model only).
Modular PDUs
– 1U/0U (up to 32 outlets)
Note: 1U/0U mounting brackets shipped with the
unit (optimized for 10000
and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC)
Note: This mPDU ( 252663-D71) may also be used
to connect the low volt model of the UPS R3000 XR.
HP Modular Power Distribution
Units (mPDU), High Volt Model, 16A (200-240 VAC)
Note: This PDU has a detachable input power
cord and allows for adaptability to country specific power requirements. This model may
also be used with the high volt UPSs R3000 XR and R6000.
Third Party PDU Mounting Kit
Note: This kit allows you to mount the Modular
PDUs in racks other than the 9000/10000 Series racks (any racks using the standard
19" rail). For more details please refer the Modular PDU QuickSpecs.
310777-B21
Other
Enhanced Keyboard
(Carbon)
296435-008
Mouse (Carbon)
103180-B21
Mouse (Carbon)
(Japan)
103180-291
ProLiant ML330/ML350
Internal to External SCSI Cable Option Kit
Note: The ProLiant ML330/ML350 Internal to
External SCSI Cable Option Kit (PN 159547-B22) is supported by the ML330 G2/ML350 Family.
Note: -B21
(pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs
and Channels)
-B23 (crated) used for air shipments of empty racks
Note: It is mandatory to use a shock pallet in order to ship racks with equipment
installed. Not all Compaq equipment is qualified to be shipped in the Rack 10000
series.
Note: -B21
(pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs
and Channels)
-B23 (crated) used for air shipments of empty racks
9000/10000 Series
Offset Baying Kit (42U)
Note: This kit can be used to connect 9000 and
10000 series racks of the same U height together. Kit contents include hardware for
connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
Rack Blanking Panels
(4U)
Note: The Rack Blanking Panels (PN 189453-B24)
contains 10 each of (4U).
189453-B24
Rack Blanking Panels
(5U)
Note: The Rack Blanking Panels (PN 189453-B25)
contains 10 each of (5U).
189453-B25
9000/10000 Series
Offset Baying Kit (42U)
Note: This kit can be used to connect 9000 and
10000 series racks of the same U height together. Kit contents include hardware for
connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
1U Rack Keyboard & Drawer
(Carbon)
Note: The 1U Rack Keyboard & Drawer
(PN 257054-001) is to be used with the Keyboards for Racks with Trackball (PN 158649-001).
Input Device Adjustable Rails
Note: Input Device Adjustable Rails
(287139-B21) are for use ONLY with the TFT5110R, TFT5600RKM and integrated keyboard/drawer
which is used in mounting into third party racks.
287139-B21
Input Device Telco Rail
Note: Input Device Telco Rails
( 287138-B21) are for use ONLY with the TFT5110R, TFT5600RKM and integrated keyboard/drawer
which is used in mounting into third party racks.
9 x 5 Coverage, 3
Years (2-5-2 Part Number for Canada)
FP-EL4HR-36
9 x 5 Coverage, 3
Years (6-3 Part Number for U.S.)
162676-002
24 x 7 Coverage, 3
Years (2-5-2 Part Number for Canada)
FP-EL724-36
24 x 7 Coverage, 3
Years (6-3 Part Number for U.S.)
162675-002
Installation
& Start-up Services
Hardware Installation
(2-5-2 Part Number for Canada)
FP-ELINS-IN
Hardware Installation
(6-3 Part Number for US)
401791-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to server at
same time of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Win NT Operating System plus up to 1 day
start-up activity, configure print & network access services, and orientation (6-3
Part Number for U.S.)
240013-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to server at
same time of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Win NT Operating System plus up to 1 day
start-up activity, configure print & network access services, and orientation (2-5-2
Part Number for Canada)
FM-MSTEC-01
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to server at
same time of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Novell NetWare Operating System plus up to
1 day start-up activity, configure print & network access services, and orientation
(6-3 Part Number for U.S.)
240008-002
Pre-installation planning; unpack
equipment, install most current Compaq HW options internal to server at same time of
server installation; assemble & test; basic user information provided; Install &
configure basic functionality of Novell NetWare Operating System plus up to 1 day start-up
activity, configure print & network access services, and orientation (2-5-2 Part
Number for Canada)
FM-NSTEC-01
CarePaq Priority Services
for ProLiant Servers – Priority Level
9 x 5 HW, 4-hr
response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Windows NT, Windows 2000, Professional, Server or Advanced Server Operating System, Next
Available Specialist (6-3 Part Number for U.S.)
239928-002
9 x 5 HW, 4-hr
response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Novell NetWare Operating System, Next Available Specialist
(6-3 Part Number for U.S.)
239968-002
9 x 5 HW, 4-hr
response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Windows NT, Windows 2000, Professional, Server or Advanced Server Operating System, Next
Available Specialist (2-5-2 Part Number for Canada)
FM-M01E1-36
9 x 5 HW, 4-hr
response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Novell NetWare Operating System, Next Available Specialist
(2-5-2 Part Number for Canada)
FM-N01E1-36
CarePaq Priority Services
for ProLiant Servers – Priority 24 Level
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr response for Windows NT,
Windows 2000, Professional, Server or Advanced Server Operating System, Next Available
Specialist (6-3 Part Number for U.S.)
239930-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr response for Novell
NetWare Operating System, Next Available Specialist
(6-3 Part Number for U.S.)
239970-002
CarePaq Priority Services
for ProLiant Servers – Priority Silver
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System, Technical Account Manager,
Technical Newsletter, SW activity review, proactive patch notification, 1 System
Healthcheck per year (6-3 Part Number for U.S.)
239932-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Windows NT,
Windows 2000, Professional, Server or Advanced Server Operating System (6-3 Part Number
for U.S.)
239934-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Novell NetWare Operating
System, Technical Account Manager, Technical Newsletter, SW activity review (6-3 Part
Number for U.S.)
239972-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Novell NetWare
Operating System (6-3 Part Number for U.S.)
239974-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System, Technical Account Manager,
Technical Newsletter, SW activity review, proactive patch notification, 1 System
Healthcheck per year (2-5-2 Part Number for Canada)
FM-M04E1-36
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Windows NT,
Windows 2000, Professional, Server or Advanced Server Operating System (2-5-2 Part Number
for Canada)
FM-M24E1-36
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Novell NetWare Operating
System, Technical Account Manager, Technical Newsletter, SW activity review (2-5-2 Part
Number for Canada)
FM-N04E1-36
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Novell NetWare
Operating System (2-5-2 Part Number for Canada)
Standard Memory 256-MB PC133-MHz Registered ECC SDRAM DIMM installed (1 x 256-MB SDRAM DIMM)
Standard
Memory Plus Optional Memory
Up to 3328-MB memory is available with the optional installation of PC133-MHz
Registered ECC SDRAM DIMM memory kits.
Standard Memory Replaced with Optional Memory
Up to 4096-MB of memory is available with the removal of the standard 256-MB of memory
and the optional installation of PC133-MHz Registered ECC SDRAM DIMM memory kits.
Note: Charts do not represent
all possible memory configurations.
Memory
Slot
1
2
3
4
Standard
256 MB
256
MB
Empty
Empty
Empty
Optional
3328 MB
256
MB
1024
MB
1024
MB
1024
MB
Maximum
4096 MB
1024
MB
1024
MB
1024
MB
1024
MB
Following are memory options
available from Compaq:
Standard Memory 128-MB PC133-MHz Registered ECC SDRAM DIMM installed (1 x 128-MB SDRAM DIMM)
Standard
Memory Plus Optional Memory
Up to 3200-MB memory is available with the optional installation of PC133-MHz
Registered ECC SDRAM DIMM memory kits.
Standard Memory Replaced with Optional Memory
Up to 4096-MB of memory is available with the removal of the standard 128-MB of memory
and the optional installation of PC133-MHz Registered ECC SDRAM DIMM memory kits.
Note: Charts do not represent
all possible memory configurations.
Memory
Slot
1
2
3
4
Standard
128 MB
128
MB
Empty
Empty
Empty
Optional
3200 MB
128
MB
1024
MB
1024
MB
1024
MB
Maximum
4096 MB
1024
MB
1024
MB
1024
MB
1024
MB
Following are memory options
available from Compaq:
Maximum Storage Capacity –
(StorageWorks Enclosure)
Internal
1.174 TB (6 x
146.8-GB 1² Ultra 320 hot plug hard drives with standard
internal drive cage + 2 x 146.8-GB 1² Ultra 320 Hot plug hard
drive using the optional ML3xx Internal Two Bay Hot Plug SCSI Drive Cage)
To
drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML350 G2
- Click on: "Power Calculator" link. (You may need to
scroll down to see it)
(Support for either two internal, two external, or a mix of
internal/external is available. This is achieved using an internal to external SCSI cable
option kit (PN 159547-B21 or PN 159547-B22) and either of the two SCSI knockouts.)
Power Supply
Output Power
(per power supply)
Rated Steady-State
Power
350W
Maximum Peak Power
400W
Temperature Range
Operating
50°
to 93° F/10° to 35° C (No direct sustaining sunlight)
Altitude range derating: 33.8° F/1° C per
984.25 ft/300 m up to 9,842.5 ft/3,000 m
Storage
(up to one year)
-4° to 140° F/-20°
to 60° C
Altitudes
up to 9,842.5 ft/
3,000m
Shipping
(up to 72 hours)
-20° to 140° F/-29°
to 60° C
Altitudes
up to 29,855.5 ft/
9100m
Relative Humidity
(non-condensing)
Operating
5% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk
Drives Spinning)
L WAd (BELS)
6.4
L pAm (dBA)
45
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
6.7
L pAm (dBA)
48
System
Unit – Rack
Dimensions (HxWxD)
8.61 x19
x 24 in/21.87 x48.26 x 60.96 cm
Weight (approximate)
60
lb/27.24 kg (without hard drives)
Input Requirements (per power supply)
Rated Input Voltage
100 to 120 VAC/200 to 240 VAC
Rated Input Frequency
50 to 60 Hz
Input Power
538W @ 110 VAC
Rated Input Current
6A/3A
Line Frequency
50 to 60 Hz
BTU Rating
1,839 BTU/hr
SCSI
Connectors
Two
internal HD68 connectors
(Support for either two internal, two external, or a mix of
internal/external is available. This is achieved using an internal to external SCSI cable
option kit (PN 159547-B21 or PN 159547-B22) and either of the two SCSI knockouts.)
Power Supply
Output Power (per power supply)
Rated
Steady-State Power
3050W
Temperature Range
Operating
50°
to 93° F/10° to 35° C (No direct sustaining sunlight)
Altitude range derating: 33.8° F/1° C per
984.25 ft/300 m up to 9,842.5 ft/3,000 m
Storage (up to one
year)
Altitudes up to 9,842.5 ft/
3,000m
-4°
to 140° F/-20° to 60° C
Shipping (up to 72
hours)
Altitudes up to 29,855.5 ft/
9100m
-20°
to 140° F/-29° to 60° C
Relative Humidity
(non-condensing)
Operating
5% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
5.02
L pAm (dBA)
35.9
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
5.87
L pAm (dBA)
40.9
1.44-MB Diskette Drive
LED Indicators (front
panel)
Green
Read/Write Capacity per
Diskette (high/low density)
1.44 MB/720 KB
Drive Supported
One
Drive Height
One-third
Drive Rotation
300 rpm
Transfer Rate (high/low)
500/250 Kb/s
Bytes/Sector
512
Sectors/Track (high/low)
18/9
Tracks/Side (high/low)
80/80
Access Times
Track-to-Track (high/low)
3/6 ms
Average (high/low)
169/94 ms
Settling Time
15 ms
Latency Average
100 ms
Cylinders (high/low)
80/80
Read/Write Heads
Two
40X Max IDE
(ATAPI) CD-ROM Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
US Site
DL Quickspecs
Search:
327281-B21
© 2012 Canada PartsDirect