NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
Processor One of the following depending on Model
Quad-Core Processors
Intel® Xeon® processor
E3-1280 (3.5GHz, 95W, 8MB, 1333, HT, Turbo 1/2/3/4) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details.
Intel® Xeon® processor
E3-1270 (3.4GHz, 80W, 8MB, 1333, HT, Turbo 1/2/3/4) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details.
Intel® Xeon® processor
E3-1230 (3.2GHz, 80W, 8MB, 1333, HT, Turbo 1/2/3/4) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details.
Intel® Core™ processor
i3-2120 (3.3GHz, 65W, 3MB, 1333, HT) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details.
NOTE: HT indicates
that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
** Slots
are enumerated differently based on OS. MS OS's enumerate from lowest to
highest Device ID by bus (starting with the lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e
connector.
NOTE: For more
information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/ML110G7
Graphics
GLP embedded Matrox G200
Form Factor
Micro ATX Tower (4U) NOTE: Rack mounting available via
HP Tower to Rack Conversion Tray, Universal Kit. Please see the options
section in this QuickSpecs.
HP Insight management software
HP Insight Foundation suite for ProLiant
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation
The HP Insight Foundation suite for ProLiant keeps systems up-to-date,
and its products are available as free downloads as well as for purchase.
These tools and utilities provide management solutions that are designed
to simplify a server's installation, configuration, and maintenance throughout
the entire server life-cycle and provide customers with higher levels
of operational efficiency and highly reliable solutions. It provides a
complete server maintenance solution by combining
Smart Update Firmware DVD
Two SmartStart CDs (one supporting 32 bit operating systems and one
supporting 64 bit operating systems)
Management DVD that includes HP Systems Insight Manager (HP SIM).
SmartStart version supported (minimum): SmartStart 8.40. On web the downloads
will be at Version 8.70. The media kit may still be shipping with earlier
versions. http://www.hp.com/servers/smartstart
NOTE: In an effort to support
reducing our environmental impact, the HP Insight Foundation Suite for
ProLiant media will be available as a selectable option for this server
at time of order of a CTO SKU. This will allow customers to order the
number of media kits that best meet their needs and eliminate receiving
unnecessary duplicate media.
HP Integrated Lights-Out 3 (3)
HP Integrated Lights-Out 3 (iLO) simplifies server setup, health monitoring,
and lights-out remote administration of ProLiant ML, DL, and BL servers.
HP iLO functions without additional software and can be accessed from
any location via a web browser. HP iLO works hand-in-hand with HP Systems
Insight Manager, Insight Control suites, and Insight Dynamics for ProLiant,
helping customers unleash the value of the ProLiant platform and deliver
the highest possible quality of IT service. For more information, visit:
www.hp.com/go/iLO
Security
Power-on password
Setup password
Secure Sockets Layer (SSL)
Secure Shell (SSH)
iLO 3 (Integrated Lights-Out
3) has 12 customizable user accounts and SSL encryption
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair are available for one year from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements.
Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details. NOTE: Server Warranty includes
1 year parts, 1 year labor, 1-year on-site support with next business
day response. (3-1-1 warranty offered in Brazil only). Warranty repairs
may be accomplished through the use of Customer Self Repair (CSR) parts.
These parts fall into two categories: 1) Mandatory CSR parts are designed
for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also
designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support
is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and/or storage products. Customers
can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging and custom packaging
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers, as well as, the MSAxxxx, VA7xxx, EVA,
XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express
HP Enterprise Configurator
The HP eConfigure Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance. http://www.hp.com/products/configurator
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires
a service partner who understands your increasingly complex business technology
environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals
at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test,
integrate, support, and manage IT and infrastructure solutions. This way,
HP proposes services solutions that include more than just uplift of base
warranty. You can get the support you need by choosing from one of a number
of service packaged solutions we have designed to address wider set of
customer support needs.
HP Technology Services meets business challenges with services offered
in three packages: Optimized Care Package, Standard Care Package, and
Basic Care Package
Available for each product group. Such packaged solutions enable customers
to optimize technology operations, minimize risk and drive better business
outcomes with easy-to-buy, easy-to-use scalable support packages for servers,
storage, networking and software.
Optimized Care Package
Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 hours of the initial service request to the HP Global
Solution Center. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
Additional Services
Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up
and Software Support) plus Microsoft or Linux education courses +30 Proactive
Select Credits, Factory Express.
Standard Care Package
Package that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
Additional Services
Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up
and Software Support); +10 Proactive Select Credits, Factory Express.
Basic Care Package
Delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
3-Year HP 13x5 4 hour Response, Hardware Support Onsite Service
Delivers increased equipment availability and productivity with rapid
remote support and onsite response for your HP server and storage hardware. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
Additional Services
Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up
and Software Support), Factory Express.
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology
to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem
resolution. It is available at no additional cost to all warranty, HP
Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please
contact your HP sales representative or HP Authorized Channel Partner
or visit: http://www.hp.com/services/proliant
SATA Models NOTE: For the Standard Features
shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below.
Options can be selected from the Core or Additional options section of
this QuickSpecs. NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs. NOTE: For general information about HP Smart Array B110i SATA RAID
Controller, please visit: http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/index.html
Entry Model
HP ProLiant ML110 G7 i3-2100 1P 2GB-U Non-hot Plug 250GB SATA 350W PS
Server
626473-001
2GB (1 x 2GB) PC3-10600E DDR3
UB ECC NOTE: Total 4 DIMM slots.
Network Controller
HP NC112i 1-Port Ethernet Server
Adapter
Storage Controller
HP Embedded Smart Array B110i
SATA RAID Controller (RAID 0/1/10)
(4 ports for HDD)
Hard Drive
1 x 250GB 3.5" Non-hot
plug SATA
Internal Storage
Up to 8.0TB (4 x 2.0TB) Non-hot
plug LFF SATA (Maximum)
Optical Drive
HP Half-Height 16x SATA DVD-ROM
Power Supply
350W Non-Hot Plug, Non-Redundant
Power Supply (70% efficiency)
Fans
One (1) - Non-redundant system
fan ships standard
One (1) - Non-redundant PCIe fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Management
HP Integrated Lights-Out Standard
(iLO 3)
Form Factor
Micro ATX Tower (4U)
Warranty
Server Warranty includes 1 year
parts, 1 year labor, 1-year on-site support with next business day response.
(3-1-1 warranty offered in Brazil only).
Base Model
HP ProLiant ML110 G7 E3-1220 1P 2GB-U Non-hot Plug 250GB SATA 350W PS
Server
626474-001
HP Embedded Smart Array B110i
SATA RAID Controller (RAID 0/1/10)
(4 ports for HDD)
Hard Drive
1 x 250GB Non-hot-plug LFF SATA
Internal Storage
Up to 8.0TB (4 x 2.0TB) Non-hot
plug LFF SATA (Maximum)
Optical Drive
HP Half-Height 16x SATA DVD-ROM
Power Supply
350W Non-Hot Plug, Non-Redundant
Power Supply (70% efficiency)
Fans
One (1) - Non-redundant system
fan ships standard
One (1) - Non-redundant PCIe fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Management
HP Integrated Lights-Out Standard
(iLO 3)
Form Factor
Micro ATX Tower (4U)
Warranty
Server Warranty includes 1 year
parts, 1 year labor, 1-year on-site support with next business day response.
(3-1-1 warranty offered in Brazil only).
Performance model
HP ProLiant ML110 G7 E3-1240 1P 4GB-U Hot Plug SATA 460W RPS Server
626475-001
HP Embedded Smart Array B110i
SATA RAID Controller (RAID 0/1/10)
(4 ports for HDD)
Hard Drive
None ship standard
Internal Storage
Up to 8.0TB (4 x 2.0TB) hot
plug LFF SATA (Maximum)
Optical Drive
HP Half-Height 16x SATA DVD-RM
Power Supply
460W Power Supply (92% efficiency)
with Power backplane NOTE: HP RPS Enablement Kit included.
To enable redundancy an additional 460W PS (P/N 503296-B21) needs to be
purchased.
Fans
Two (2) - Non-redundant system
fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Management
HP Integrated Lights-Out Standard
(iLO 3)
Form Factor
Micro ATX Tower (4U)
Warranty
Server Warranty includes 1 year
parts, 1 year labor, 1-year on-site support with next business day response.
(3-1-1 warranty offered in Brazil only).
Configuration Information - Factory Integrated Models
NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory
Integrated Models" section. NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on configurable product offerings
and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE: FIO indicates that this option is only available as a factory
installable option.
Step
1: Base Configuration
HP
Models
HP ProLiant ML110
G7 Hot Plug 4 LFF Configure-to-order Server NOTE: This model ships with 4 Large
Form Factor (3.5-inch) hard drive bays
NOTE:
All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool at: www.hp.com/go/ddr3memory-configurator.
HP
Power Supplies
HP
350W Factory Integrated Power Supply Kit
646146-B21
HP
460W Common Slot Gold Hot Plug Power Supply Kit NOTE: HP RPS G7 4U Enablement Kit has been included with 460W Power
Supply. To implement Redundant Power Supply the purchase of an additional
460W Power Supply (PN 503297-B21) is required.
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool
at: www.hp.com/go/ddr3memory-configurator.
HP Optical Drives
HP Half-Height SATA DVD-ROM Optical
Drive
447326-B21
HP Half-Height SATA DVD-RW Optical
Drive
447328-B21
HP Drive Cage Options
HP 4U LFF Hot Plug Drive Cage
Kit
637216-B21
HP 4U SFF Hot Plug Drive Cage
Kit NOTE: To make the above drive cage
functional, HDDs, cable and backplane are needed.
637460-B21
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and firmware)
should operate at the same data transfer rate or the system bandwidth will
be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives
HP 300GB 6G SAS 10K
rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
SAS Non-Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives NOTE: Support for SAS non-hot plug
drives requires HP SAS/Smart Array Controller. See Step 3 below.
HP 600GB 6G SAS 15K rpm LFF (3.5-inch)
Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
NOTE: To implement
Redundant Power Supply, HP RPS Enablement kit (P/N 637464-B21) and additional
460W Power Supply (P/N 503297-B21) need to be purchased
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP
Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical
Support and Updates Electronic License
T9074BAE
HP Insight Control Smart Buy including 1yr
24x7 Technical Support and Updates Electronic License
T9074ASE
HP Insight Control including 1yr 24x7 Support
ProLiant ML/DL/BL-bundle Electronic License
TC278AAE
HP Insight Software Media Kit NOTE: Insight Software DVD media
without licenses. Contains HP Systems Insight Manager, HP Insight Control,
HP Insight Dynamics, HP Insight Control for Microsoft System Center, and
Virtual Connect Enterprise Manager software. Uses an integrated installer
to perform quick and accurate software installation and updates.
436222-B21
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux w/1yr 24x7 Supp
ML/DL/SL Bundle Electronic 1 Svr LTU
TC203AAE
HP Insight Control for Linux including 1yr
24x7 Support Electronic License
TC213AAE
HP Insight Control Smart Buy for Linux including
1yr 24x7 Support Electronic License
TC213ASE
HP Insight Control for Linux Media Kit NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
TC208A
NOTE: Licenses ship without
media. The Media Kit for Insight Control for Linux can be ordered separately,
or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Insight Control server deployment
HP Insight Control Server Deployment including
1yr 24x7 Support Electronic License
T9082AAE
HP Insight Control Server Deployment including
1yr 24x7 Support Single Server License
452151-B21
NOTE: Licenses ship without
media. The Insight Control Media Kit can be ordered separately, or can be
downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key. NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the Insight Control
QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Integrated Lights-Out (iLO) Advanced
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Electronic License
TA850AAE
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Single Server License NOTE: This license allows 1 server
to be deployed and managed via HP iLO Advanced. Customer will receive a
printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service.
NOTE: The TPM
(Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities
of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker
to help protect user data and to ensure that a server running Windows Server
2008 has not been tampered with while the system was offline. NOTE: For more information about TPM, please visit: www.hp.com/go/TPM NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers
SAS Controllers NOTE: Support for SAS hard drives/tape
drive requires selection of a SAS controller. NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports
Int/1-ports Ext PCIe x8 SAS Controller
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter NOTE: Supports SCSI Tapes only, no
RAID support. NOTE: HBA is recommended for SCSI tape drive support. NOTE: Please see the following QuickSpecs for Technical Specifications
and additional information: http://h18004.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SC11Xe HBA)
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup
products see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB Internal
Tape Drive
AJ825A
HP StorageWorks DAT 320 SAS Internal
Tape Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
AJ830A
HP StorageWorks Ultrium 448 SAS
Internal Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
DW085A
HP StorageWorks Ultrium 920 SAS
Internal Tape Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
EH847A
HP StorageWorks 1/8 G2 Ultrium
920 SAS Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack-Mount Kit (AH166A) for rack installation. Connection using HP P212
Smart Array Controller SAS ( 462828-B21) recommended.
AH558A
HP StorageWorks MSL2024 Ultrium
920 SAS Tape Library NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
NOTE: These are
network connected appliances with connectivity using the iSCSI protocol.
If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
USB Removable Media RDX Disk Backup
Systems
HP StorageWorks RDX320 Internal
Removable Disk Backup System NOTE: 320GB of disk capacity per
data cartridge.
AJ767A
HP StorageWorks RDX500 Internal
Removable Disk Backup System NOTE: 500GB of disk capacity per
data cartridge.
AJ934A
HP RDX 1TB Internal Removable
Disk Backup System NOTE: 1TB of disk capacity per data
cartridge.
BV847A
HP Uninterruptible Power Systems
HP Tower UPS
HP T750 G2 UPS Models
HP T750 G2 750VA Tower Uninterruptible
Power System
AF446A
HP T1000 G3 UPS Models
HP T1000 G3 1000VA Tower Uninterruptible
Power System
AF448A
NOTE: For additional
information regarding HP Uninterruptable Power Systems, please see the following
URL: www.hp.com/go/rackandpower NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: Please see
the UPS and PDU cable matrix's on the HP Power Protection and Management
page. Under Power Cords, click on the "HP Power Cord Matrix" link.
That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link: www.hp.com/products/powercords.
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000
G2 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack
includes closing front and rear doors, you must allow 830 square inches
(5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for
ventilation).
Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty
front panel U-spaces in the rack. This arrangement ensures proper airflow.
Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
NOTE: Support
for all 2 and 4 post Telco racks and threaded hole racks requires an additional
option kit from Rack Solutions. The Rack Solutions brackets can be purchased
at: www.hp.com/go/rackandpower.
0x2x16 KVM Server Console G2 Switch
with Virtual Media and CAC
AF618A
0x2x32 KVM Server Console G2 Switch
with Virtual Media and CAC
AF619A
1x1Ex8 KVM IP Console Switch G2
with Virtual Media and CAC
AF620A
2x1Ex16 KVM IP Console Switch
G2 with Virtual Media and CAC
AF621A
4x1Ex32 KVM IP Console Switch
G2 with Virtual Media and CAC
AF622A
NOTE: For additional
information regarding KVM Switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
HP
Care Pack Services
Hardware Services Next Business
Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years,
Electronic
U4433E
Hardware Services - 4-Hour On-site
Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
U4434E
24-Hour x 7-Day Coverage, 3 Years,
Electronic
U4435E
Hardware Services 6-Hour Call
to Repair On-Site Service
6-Hour Call to Repair, On-Site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits
installed.
Standard Memory with
Optional Memory
Up to 8GB of memory
is available with the installation of standard and optional memory, 4x 2
GB PC3-10600E un-buffered ECC DDR3 SDRAM DIMM Memory kits.
NOTE:
The below chart does not represent all possible memory configurations. NOTE: For best performance, it is recommended that customer installs
memory in identical pairs (Slots 1C and 3D are interleaving pair. Slots
2A and 4B are interleaving pair).
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator.
Hard Drives (SATA Models
only) NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, and firmware) should operate
at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug
LFF (3.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G 7.2K
1TB 3G 7.2K
500GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller
(RAID 0/1/10) NOTE: Hardware RAID support requires
purchase of HP Smart Array P212 Controller.
SATA Non-Hot Plug
LFF (3.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G 7.2K
160GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller
(RAID 0/1/10) NOTE: Hardware RAID requires purchase
of HP Smart Array P212 Controller.
SATA Hot Plug SFF
(2.5-inch) Midline (MDL) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
160GB 3G 7.2K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SATA Hot Plug LFF
(3.5-inch) Midline (MDL) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
2TB 3G 7.2K DP
1TB 3G 7.2K DP
500GB 3G 7.2K DO
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SATA Hot Plug LFF (3.5-inch) Entry
(ETY) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
250GB 3G 7.2K
160GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SATA Non-Hot Plug LFF (3.5-inch)
Midline (MDL) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
2TB 3G 7.2K
1TB 3G 7.2K
500GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SATA Non-Hot Plug LFF (3.5-inch)
Entry (ETY) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
250GB 3G 7.2K
160GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
Hard Drives (SAS Models
only)
SAS Hot Plug SFF (2.5-inch)
Enterprise (ENT) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
300GB 6G SAS 15K DP
146GB 6G SAS 15K DP
146GB 6G SAS 10K DP
72GB 6G SAS 15K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SAS Hot Plug SFF (3.5-inch)
Enterprise (ENT) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 15K DP
450GB 6G SAS 15K DP
300GB 6G SAS 15K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
500GB 6G SAS 7.2K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SAS Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 15K DP
450GB 6G SAS 15K DP
300GB 6G SAS 15K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
SAS Non-Hot Plug LFF
(3.5-inch) Enterprise (ENT) Drives NOTE: SAS non-hot plug drives require
HP SAS/Smart Array Controller.
Quantity
Supported
Position
Supported
Controller
600GB 6G 15K DP
450GB 6G 15K DP
300GB 6G 15K DP
Up to 4
3,4,5,6
Smart Array P212 Controller NOTE: Transfer rates of drives are
dependent on the maximum transfer rate supported by the Controller. Refer
to the Controller technical specifications for details.
Maximum Storage Capacity - SATA/SAS Models
Internal
SATA
8.0TB (4 x 2TB)
SAS
8.0TB (4 x 2TB)
Tape and Disk-Based
Backup
NOTE:
For the complete range of StorageWorks tape drives, autoloaders, libraries
and media, including the internal fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Recommended Controller
Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
Internal or External
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity
matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
HP StorageWorks USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750
RDX 1TB
Internal or External
USB 2.0 port
N/A
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc
System Leakage with all power supplies
loaded (mA)
0.45mA@110V
0.45mA@220V
System Inrush Current with all power
supplies loaded (A)
<150A@240Vac
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully
configured system consisting of (1) CPU, (4) double-sided DIMMs, (4)
HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power **
HP ProLiant ML110 G7 Fully Configured
(see **)
Fully Loaded System output Wattage
(W)
460W
Fully Loaded System Input Current (A
rms)
5.5A @ 100V, 2.6A @ 200V
Fully Loaded System Thermal (BTU- Hr)
1794
Fully Loaded System VA (Volt-Amp)
548
System Leakage with all power supplies
loaded (mA)
0. 5mA@110V
0.92mA@220V
System Inrush Current with all power
supplies loaded (A)
30A/20mS @240Vac
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully
configured system consisting of (1) CPU, (4) double-sided DIMMs, (4)
HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets)
Power Cord Part Number
121565-001
NOTE: To review
typical system power ratings use the Active Answers HP Power Advisor which
is available via the online tool located at URL: http://www.hp.com/go/hppoweradvisor
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML110 G7
- Click on: "Power Calculator" link. (You may need to scroll down
to see it)
Non Hot Plug LFF Full Loading
Single Package weight
19kg (41.8 lb)
Non Hot Plug LFF Full Loading
without Package
14.60kg. (32.12 lb)
Non Hot Plug LFF light Loading
without Package
12.20kg. (26.84 lb)
350W Input Requirements
(per power supply)
Rated Line Voltage
90 to 132 VAC,
180 to 264 VAC
Rated Input Current
5 A (at 100 VAC),
2.5 A (at 200 VAC)
Rated Input Frequency
47 to 63 Hz
Rated Input Power
486W (at 100 VAC),
480 W (at 200 VAC)
Power Specifications
To review typical
power ratings use the Power Advisor which is available via the online tool
located at URL: http://www.hp.com/go/hppoweradvisor
Power Supply Output
(per power supply)
Rated Steady-State Power
350 W (at 100 VAC),
350 W (at 200 VAC)
Maximum Peak Power
350 W (at 100 VAC),
350 W (at 200 VAC)
460W Input Requirements
(per power supply)
Rated Line Voltage
90 to 132 VAC,
180 to 264 VAC
Rated Input Current
5.5 A (at 100 VAC),
2.6 A (at 200 VAC)
Rated Input Frequency
47 to 63 Hz
Rated Input Power
526W (at 100 VAC),
505 W (at 200 VAC)
Power Specifications
To review typical
power ratings use the Power Advisor which is available via the online tool
located at URL: http://www.hp.com/go/hppoweradvisor
Power Supply Output
(per power supply)
Rated Steady-State Power
460 W (at 100 VAC),
460 W (at 200 VAC)
Maximum Peak Power
460 W (at 100 VAC),
460 W (at 200 VAC)
System Inlet Temperature
Operating
10° to 35°C (50° to
95°F) at sea level with an altitude derating of 1.0°C per every
304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048
m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of
options installed.
System may shut down if operating with a fan fault or above 42°C °(107.6°F).
Non-operating
-35° to 65°C (-31°
to 149°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10% to 90% relative humidity (Rh),
28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating
10% to 95% relative humidity (Rh),
38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3048 m (10,000 ft). This value
may be limited by the type and number of options installed. Maximum allowable
altitude change rate is 609 m/min (2000 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 609 m/min (2000 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L WAd
4.1 Bels
L pAm
24.4 dBA
Operating
L WAd
4.1 Bels
L pAm
24.4 dBA
NOTE:
The listed sound levels above apply to standard SATA configurations. Additional
options may result in increased sound levels.
Emissions Classification
(EMC)
FCC Rating
Class B
Normative Standards
CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438; GB9254; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
Integrated Lights-Out
Standard (iLO 3)
integrated on system board
Architecture
PCI Express based health and remote
management ASIC
Processor
PCI Express RISC processor core
running at 250MHz
Upgradeability
Option firmware upgradeable via
Flash ROM.
Video Support
1600 x 1200 DVR max resolution
Interfaces
One Ethernet Sideband connection
(10/100/1000 Mb/s)
Memory
128-MB SDRAM with ECC
Operating System Support
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and Windows Server
2003 for Embedded Systems Standard Edition, Enterprise Edition
Red Hat Enterprise Linux 5.5 (32 bit and 64 bit)
Red Hat Enterprise Linux 6(32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line Support
Secure Shell and serial port access
Security
Secure Socket Layer
Secure Shell version 2 (Password and certificate)
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES)
on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
SNMP, IPMI 2.0 (System and LAN
interface), DMTF Systems Management Architecture for Server Hardware Command
Line Protocol (SMASH CLP), HP RIBCL XML
HP 250GB 3G SATA
7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive
571232-B21
Capacity
250,059MB
Height
Maximum drive dimension
1.028 in. (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
Maximum drive dimension
5.787 in (147.0 mm)
Interface
Serial ATA
Transfer Rate
(Maximum)
3Gb/s
Native Command Queuing
Supported
Seek Time
(typical reads, including settling)
Single Track
2.0 ms
Average
11 ms
Full-Stroke
21.0 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
488,397,168
Operating Temperature
(system inlet air temperature)
50° to 95° F
(10° to 35° C)
HP Half-Height 16X
Max SATA DVD-ROM Optical Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
Capacity
4.7 GB (DVD-5)
8.54 GB (DVD-9)
Block Size
DVD Media
2,048 bytes
Interface
SATA
1.5Gb/s
Access Times
(typical)
Random
<140 ms
Full-Stroke
<250 ms
Data Transfer Rate
Sustained
21600 KB/s (16X) Maximum
Cache Buffer
2MB Minimum
Start-up Time (typical)
(Not including tray in)
< 7 seconds
Stop Time
(Not including tray in)
< 4 seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 122° F (5°
to 50° C)
Humidity
10% to 90%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (42.9 x 150
x 195 mm)
Weight
2.64 lb (1.2 kg)
HP Half-Height 16X
Max SATA DVD-RW Optical Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
Capacity
4.7 GB (DVD-5)
8.54 GB (DVD-9)
Block Size
DVD Media
2,048 bytes
Interface
SATA
1.5Gb/s
Access Times
(typical)
Random
<140 ms
Full-Stroke
<250 ms
Data Transfer Rate
Sustained
21600 KB/s (16X) Maximum
Cache Buffer
2MB Minimum
Start-up Time (typical)
(Not including tray in)
< 7 seconds
Stop Time
(Not including tray in)
< 4 seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 122° F (5°
to 50° C)
Humidity
10% to 90%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (42.9 x 150
x 195 mm)
Weight
2.64 lb (1.2 kg)
HP NC112i 1-port
Ethernet Server Adapter
Network Interface
10Base-T/
100Base-TX/
1000Base-TX
Ports
Single Port
802.3, 802.3u, 802.3x,
802.3ab, 802.3ad, 802.1p, 802.1Q
PCIe Rev. 2.0 (2.5 GHz) x1
FCC (U.S. only) Class B
DOC (Canada) Class B
CE EN 55024, EN55022 Class B
VCCI Class II
UL 1950
CSA 950
EN 60950
CE
ACPI 1.0
MicroSoft WHQL (Windows Hardware Quality Labs)
Data Transfer Method
Singlelane (x1)
Controller
Intel 82574L
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45 connector
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to
328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100
m)
Environment-friendly Products
and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
503296-B21
© 2012 Canada PartsDirect