Optional 3rd and 4th 3.5"
hot-plug SAS/SATA or non-hot plug SATA hard drive bays
10.
Full-sized riser board assembly
slot cover
11.
Standard 1st and 2nd 3.5"
hot-plug SAS/SATA or non-hot plug SATA hard drive bays
12.
Full height/full length PCI-Express
or HTX slot
What's New
Supports up to Support for SATA Hot Plug 3.5" Midline (MDL)
Drives
At A Glance
Introducing the HP ProLiant DL165G6, now available with the latest high
performance Opteron Six-Core processors and a new high efficiency power
supply.
Processors:
Supports up to two AMD Opteron™ 2400 series Six-Core processors
Supports DirectConnect Architecture
Supports Power Now
Memory:
8 DIMM slots supporting up to 32GB REG PC2-6400 DDR2-800 MHz memory
with Advanced ECC
8 DIMM slots supporting up to 64GB REG PC2-5300 DDR2-667 MHz memory
with Advanced ECC
Internal Drive Support:
Internal storage capacity:
SATA Capacity: Support for up to 8.0TB (4 x 2TB) with Hot Plug
Model. 8.0TB (4 x 2GB) with Non Hot Plug Model
SAS Capacity: Support for up to 8.0 TB (4 x 2TB) with Hot Plug
Model NOTE: Installation of the
Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering
third or fourth Hard Drives for Hot Plug models only.
Network Controller:
Embedded NC7782 dual-port gigabit server adapter
Storage Controllers:
Non-Hot Plug SATA Models: HP Embedded SATA Controller NOTE: Raid support requires
optional slot based raid controller
Hot Plug SATA/SAS Models: HP P212 Smart Array Controller
Expansion Slots:
Standard - PCI-Express assembly includes:
Slot 1: full-length/full height PCI-Express x16
Slot 2: half-length/low-profile PCI-Express x4 (x8 connector)
(Reserved in the Hot Plug Model for Smart Array Controller)
HP Lights-Out 100i with optional LO100i Advanced Licenses for
Virtual KVM and Virtual Media.
HP Insight Control for Linux, a product option, delivers essential
infrastructure management that can help save time and money by making
it easy to deploy, migrate, monitor, control and optimize your IT
infrastructure through a single, simple management console. Insight
Control for Linux supports Linux-based central management servers.
USB Ports:
Up to five USB ports (two front & two rear standard, 1 internal
option)
Optical Drive:
Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply:
500W High Efficiency Power Supply (Non-Hot Plug, Autoswitching)
Form Factor:
Rack (1U)
Fixed mounting rails included with all models
Deployment/Serviceability:
HP ProLiant DL165 G6 models have fixed rails which provide support
for racks with round mounting holes and tool-free support for racks
with square mounting holes (including Compaq/HP 7000, 9000, 10000
and HP series), with an adjustment range of 26" - 36
Tool-less access to all system components for easy in-rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR
parts to minimize repair time and allow for greater flexibility in
performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair is available for one year from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services
are available through HP Care Pack services or customized service
agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes
3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support.
Warranty terms may vary by region. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
NOTE: For the Standard Features shipped
in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processor One of the following depending on Model
AMD Opteron™ processor
Model 2435 (2.6 GHz, 75W ACP)
AMD Opteron™ processor
Model 2431 (2.4 GHz, 75W ACP) NOTE: Offered through Configure-To-Order
only. See Factory Integrated Models section for more details.
AMD Opteron™ processor
Model 2427 (2.2 GHz, 75W ACP)
AMD Opteron™ processor
Model 2425HE (2.1 GHz, 55W ACP)
AMD Opteron™ processor
Model 2423HE (2.0 GHz, 55W ACP)
Upgradeability
Upgradeable to two processors
Chipset
ServerWorks HT2100 and HT1000
Cache Memory
Model Series 24xx
6MB shared L3
Memory Protection
Advanced ECC
Memory One of the following depending on Model
Type
REG PC2-6400 DIMMs
(DDR2-800)
REG PC2-5300 DIMMs
(DDR2-667)
Standard
4 GB (2 x 2 GB)
Maximum
64 GB (8 x 8 GB)
Network Controller
Embedded NC7782 dual-port gigabit
server adapter
Expansion Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
PCI Express
x16
x16
3
Full Height/Full Length
1
HTX
N/A
N/A
9
Full Height/Full Length
2
PCI Express
x4
x8
6
Low-profile
2
PCI-X
64-bit, 133MHz
N/A
2
Low-profile
*
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number.
**
Slots are enumerated differently based on OS. MS OS's enumerate from lowest
to highest Device ID by bus (starting with the lowest bus).
NOTE:
Slot 2 is reserved for a storage controller with the Hot Plug Model chassis.
Storage Controller
Non-Hot Plug SATA
HP Embedded SATA Controller NOTE: Raid support requires optional
slot based raid controller.
Hot Plug SATA/SAS
HP Smart Array P212 RAID Controller NOTE: Transfer rate: up to 3 Gb/s
SATA, up to 3 Gb/s SAS.
NOTE:
A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install
storage controller drivers during a Windows operating system installation
from a CD. NOTE: RAID 6 functionality requires the addition of Smart Array Advanced
Pack (P/N: 516471-B21).
Storage
Diskette Drives
Via USB only
Optical Drives
Optional 8x IDE (ATAPI) DVD-ROM
drive, slim
Optional 24x IDE (ATAPI) DVD-ROM/CDRW
drive
Hard Drives
Up to 4 Non-hot plug SATA 3.5"
drives
Up to 4 Hot plug SATA /SAS 3.5"
drives
Maximum Internal
Storage
Non-Hot Plug SATA
8.0TB
4 x 2TB
Hot Plug SATA
8.0TB
4 x 2TB
Hot Plug SAS
8.0TB
4 x 2TB
Interfaces
Parallel
None
Network RJ-45(Ethernet)
Embedded NC7782 dual-port gigabit
server adapter
Serial
1
Pointing Device (Mouse)
1
Graphics
1
Keyboard
1
USB
Up to 5 (two front & two
rear standard, 1 internal option).
Graphics
32MB shared supporting 1600x1200x16M
resolution
Form Factor
Rack (1U), (1.75 in/4.45 cm)
Embedded Manageability
HP LO100i Advanced
HP Lights-Out 100 with Optional LO100i Advanced Licenses for Virtual
KVM and Virtual Media.
Standard Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
Licensed Features:
Virtual media (Floppy, CD, USB 2.0)
Virtual KVM
Secure Socket Layer (SSL) Encryption
Secure Shell (SSH) Encryption
NOTE: Flexible and volume quantity (AKA)
license kits are available for the Lights-Out 100i Advanced Pack licenses
as well as Electronic License To Use (E-LTU). AKA Tracking licenses require
a 100 unit minimum forecast at initial contract signing. For these additional
part numbers, please refer to each software products. QuickSpecs at this
link for more information: www.hp.com/go/lo100
HP Insight Control management
software
HP Insight Control for Linux
HP Insight Control for Linux, as a product option, delivers essential
infrastructure management that can help save time and money by making
it easy to deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console. The Insight Control for Linux
installs and license software modules that are integrated into HP System
Insight Manager.
The HP Insight Control for Linux (IC-Linux) serves environments requiring
a Linux-based management consoles. See: www.hp.com/go/ic-linux
HP Insight Control include one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service,
please visit: http://www.hp.com/services/insight.
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Security
Power-on password
Setup password
SSH and SSL Encryption
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable
matrix's on the HP Power Protection and Management page. Under Power Cords,
click on the "HP Power Cord Matrix" link. That link will list
cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
Power Supply
500 Watts, auto-switching, high
efficiency, PFC (Power Factor Correcting).
System Fans
6 system fans ship standard;
non-hot plug, non-redundant
Operating Systems
and Virtualization Software Support for ProLiant Servers
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for
OS and Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/DL165G6.
Rack Airflow Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is
used, observe the following additional requirements to ensure adequate airflow
and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and
rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to
the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels
of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
Rack Support
The DL Fixed Rail System supports
installation in racks with square or round mounting holes (including Compaq/HP
7000, 9000, 10000 and HP series), with an adjustment range of 24" -
36".
Telco Rack Support
Installation into Telco 2 post,
and 4 post, or threaded holes racks requires a 3rd party option kit. For
additional information, please visit: www.hp.com/go/rackandpower
HP Factory Express Capability
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HPC Interconnects
NOTE:
High Performance Computing (HPC) interconnect technologies are available
for this server under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html
InfiniBand
PCI-Express Generation 2 adapters
HP Enterprise Configurator
The HP eConfigure Enterprise Configurator now provides factory default
racking for our HP hardware portfolio. This approach is aligned with our
strategic direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
Service and Support
HP Care Pack Services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server that are purchased at the same time or afterward
and internal to the enclosure. It also includes the 22" and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance
and management.
Support Service - 3-Year 24x7 4 hr Response service support
coverage
Deployment Service - Hardware Installation
Enhanced Service - Optimize service level to increase IT performance
and availability
Support Service - 3Year 24x7 24 hr Call to repair service support
coverage
Support Service - 3-Year 24x7 6 hr Call to repair service support
coverage
Support Plus - 24x7 24 hr Call to repair service support including
OS coverage Operating
Installation & Start-Up of a ProLiant server and Microsoft or Linux
O/S per the Customer Description and/or Data Sheet. To be delivered on
a scheduled basis 8am-5pm, M-F, excl. HP holidays.
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO
Chassis. NOTE: FIO indicates that this option is only available as a Factory
Installable Option.
Step 1: Base Configuration
HP Models
Non-Hot Plug SATA Model
HP ProLiant DL165 G6 Non-Hot Plug
SATA Rack Chassis
572227-B21
Factory Integrated Model ships
with:
Embedded NC7782 dual-port gigabit
server adapter
Two available PCI-Express slots, including one full-length/full height
and one low-profile/half height slot
HP embedded SATA controller
One Highline IEC Power Cord
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Tool-less Fixed Rails
Hot Plug SATA/SAS Model
HP ProLiant DL165 G6 Hot Plug
SATA/SAS Rack Chassis
572228-B21
Factory Integrated Model ships
with:
Embedded NC7782 dual-port gigabit
server adapter
One full-length/full height PCI-Express
slot.
Low-profile/half height slot houses the HP Smart Array P212 storage controller
One Highline IEC Power Cord
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Tool-less Fixed Rails
Step 2: Choose Required
Options (only one of the following from each list unless otherwise noted)
HP Processors
NOTE: If 2 processors
are desired, select one xxxxxx-B21 and one xxxxxx-B21.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Required only if P/N 572227-B21 selected in Step 1. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
Serial-ATA (SATA) Non-Hot
Plug Hard Drives (Non-Hot Plug Models Only)
SATA Non-Hot Plug LFF (3.5-inch)
Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF
(3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive
571232-B21
HP 160GB 3G SATA 7.2K rpm LFF
(3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive
NOTE: A minimum
of one Smart Array Controller is required when purchasing Hot Plug CTO Chassis
Model (P/N 572228-B21). NOTE: In order to upgrade to RAID 6, at least 256MB Cache and a Battery
is required in addition to the Smart Array Advanced Pack license (516471-B21).
Many HP ProLiant Servers now offer
new power options, including Common Slot Power Supplies. These power supplies
come in multiple power ratings and higher efficiency levels to offer the
Right Size solution to fit your configuration. This provides improved power
delivery and the advantage of reclaiming lost power. Prior to making a power
supply selection it is "highly recommended" that the "HP
Power Advisor" is run to determine the right size power supply for
your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
HP High Efficiency 750W CS Power
Supply/Backplane/Bracket FIO Kit
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug LFF (3.5-inch) Midline
(MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch)
Midline 1yr Warranty Hard Drive
10 Gigabit Ethernet Adapters NOTE: No more than two10GbE I/O devices
are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required
per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP LO100i Advanced Pack, No Media
1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: For additional License Kits
please see the Lights-Out 100i QuickSpecs at: www.hp.com/go/lo100.
530521-B21
HP Insight Software
HP Insight Control for Linux
HP Insight Control for Linux,
1-server license, including one year of 24x7 Technical Support and Updates,
Electronic
TC213AAE
HP Insight Control for Linux,
No Media, 1-Server license, including one year of 24x7 Technical Support
and Updates
TC209A
HP Insight Control for Linux,
Media pack (DVD) - No licenses included
TC208A
NOTE: Licenses
ship without media. The Media Kit for Insight Control for Linux can be ordered
separately, or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and are available in all countries except
China and Japan. Customers in China and Japan should order the physical
equivalent. NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Insight Control server deployment
HP Insight Control server deployment
Electronic License including 1 year 24x7 Technical Support and Updates
T9082AAE
HP Insight Control server deployment
1-Server License including 1 year 24x7 Technical Support and Updates
452151-B21
NOTE: Licenses
ship without media. The Insight Control Media Kit can be ordered separately,
or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the Insight Control
QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Graphic Options
HP Graphic Card Power Adapter
Kit
533955-B21
HP Drive Cage Options
Hot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug
Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth
Hard Drives for Hot Plug models only.
445985-B21
HP Storage Controllers
NOTE: The addition
of storage controllers for internal hard drive use is intended for use ONLY
with the Hot Plug SATA/SAS Model Chassis (572228-B21).
HP Smart Array Advanced Pack No
Media 1-Server license including 1yr 24x7 Technical Support
516471-B21
NOTE: This part
number can be used to purchase a single license or to order multiple licenses
with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Include
one year of 24x7 HP Software Technical Support Services.
NOTE: For the
complete range of StorageWorks tape drives, autoloaders, libraries and media
see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup products
see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB Internal
Tape Drive
AJ825A
HP StorageWorks DAT 320 SAS Internal
Tape Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
AJ830A
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
DW085A
HP StorageWorks LTO-3 Ultrium
920 SAS Internal Tape Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
EH847A
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack-Mount Kit (AH166A) for rack installation. Connection using HP P212
Smart Array Controller SAS ( 462828-B21) recommended.
AH558A
HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive NOTE: Connection using HP P212
Smart Array Controller SAS ( 462828-B21) recommended.
AH559A
HP StorageWorks MSL2024 Tape Library
with one LTO-5 Ultrium 3000 SAS Drive NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
NOTE: These are
network connected appliances with connectivity using the iSCSI protocol.
If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
USB Removable Media RDX Disk Backup
Systems
HP StorageWorks RDX320 Internal
Removable Disk Backup System NOTE: 320GB of disk capacity per
data cartridge.
AJ767A
HP StorageWorks RDX500 Internal Removable Disk Backup System NOTE: 500GB of disk capacity per
data cartridge.
AJ934A
HP StorageWorks RDX750 Internal
Removable Disk Backup System NOTE: 750GB of disk capacity per
data cartridge.
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment
installed (by custom systems, VARs and Channels).
0x2x16 KVM Server Console G2 Switch
with Virtual Media and CAC
AF618A
0x2x32 KVM Server Console G2 Switch
with Virtual Media and CAC
AF619A
1x1Ex8 KVM IP Console Switch G2
with Virtual Media and CAC
AF620A
2x1Ex16 KVM IP Console Switch
G2 with Virtual Media and CAC
AF621A
4x1Ex32 KVM IP Console Switch
G2 with Virtual Media and CAC
AF622A
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
HP USB and SD Options
HP USB Internal Cable Kit
451363-B21
USB P/S2 Optical Mouse
DC369A
HP USB 04 Standard
Keyboard
DT528A#ABA
HP Care Pack Services
Hardware Services 4-Hour On-site
Service
13-Hour x 5-Day Coverage, 3 Years,
Electronic
U9509E
24-Hour x 7-Day Coverage, 3 Years,
Electronic
U9510E
Hardware Services Next Business
Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years,
Electronic
U9508E
Hardware Services 6-Hour Call
to Repair On-Site Service
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL165
G6 (all models)
Standard Memory
4 GB (2 x 2 GB) PC2-6400 DIMM memory, with Advanced ECC Capabilities memory
installed. Maximum Memory
Up to 64GB memory is available with the optional installation of PC2-5300
Registered DIMM memory kits.
Memory should be installed in pairs and matched for optimum performance.
NOTE:
Chart does not represent all possible memory configurations. NOTE: Each processor support 4 DIMM sockets. Both processors sockets
must be populated in order to use all 8 DIMM sockets.
Memory
Slot
1
2
3
4
5
6
7
8
Standard (4
GB)
2 GB
2 GB
Empty
Empty
Empty
Empty
Empty
Empty
Maximum (64 GB)
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
HP Memory
Following are memory options available
from HP:
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit
Non-hot plug 3.5" SATA or
Hot-plug SAS/SATA hard drive bays
A
Optional DVD-ROM, or DVD/CD RW
Drive Support
Removable Media
Quantity
Supported
Position
Supported
Controller
DVD-ROM
Up to 1
A
Integrated IDE (ATAPI) (optional)
DVD/CD RW
Up to 1
A
Integrated IDE (ATAPI) (optional)
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, and the server backplane)
should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug
LFF (3.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Non-Hot Plug
LFF (3.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Hot Plug LFF
(3.5-inch) Entry (ETY) Drives NOTE: Installation of the Hot Plug
Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth
Hard Drives for Hot Plug models only.
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 4
1-4
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
SATA Hot Plug LFF
(3.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
Up to 4
1-4
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
SATA Hot Plug 3.5" Midline
(MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
120GB 3G SATA
60GB 3G SATA
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS
HBA with RAID 0, 1 NOTE: When using the SC40Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS
HP Smart Array P400 Controller
HP Smart Array P800 Controller
SAS Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 15K
450GB 6G SAS 15K
450GB 3G SAS 15K
300GB 6G SAS 15K
146GB 3G SAS 15K
Up to 4
1-4
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
SAS Hot Plug LFF (3.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 6G SAS 7.2K
1TB 6G SAS 7.2K
1 TB 3G SAS 7.2K
750GB 3G SAS 7.2K
Up to 4
1-4
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
External Storage
Quantity
Supported
Position
Supported
Controller
50 Modular Smart Array
Up to 4
External
HP Smart Array E500/256 MB Controller
HP Smart Array P800/512 BBWC Controller
60 Modular Smart Array
Up to 4
External
HP Smart Array E500/256MB Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Up to 8
External
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
70 Modular Smart Array
Up to 2
External
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/ 256 MB Controller
Up to 4
External
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
Tape and Disk-Based Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Recommended Controller
Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
HP StorageWorks
Fibre Channel Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the
EBS connectivity matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
HP StorageWorks
USB RDX Removable Disk Backup System
RDX160
RDX320
RDX500
RDX750
Internal or External
USB 2.0 port
N/A
HP StorageWorks
D2D Backup Systems, iSCSI
D2D2500i
D2D4000i
External
Embedded Network
Controller. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
HP StorageWorks
D2D Backup Systems, Fibre Channel
D2D4000fc
System Inrush Current with all
power supplies loaded (A)
30
30
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
NOTE:
Power shown is for a fully configured system consisting of (2) CPU, (8)
double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards.
Power Cord
AF556A
Server Power Cords
One 6' Highline (IEC-IEC)
power cord ships standard NOTE: HP ProLiant DL servers no longer
ship standard with NEMA power cords (163719-002) that allow connection to
110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only
a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server
using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must
be ordered separately.
If customers require a power cord, they can check the power cord matrix
for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
- Click on the system of interest. Example: DL165 G6
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power
900 W (at 100 VAC),
1200 W (at 200 VAC)
Maximum Peak Power
900 W (at 100 VAC),
1200 W (at 200 VAC)
System Inlet Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above
sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may
be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C
(-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative
humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative
humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft).
This value may be limited by the type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft).
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.82 B
LpAm
51.93 dBA
Operating
LWAd
6.84 B
LpAm
51.93 dBA
Emissions Classification
(EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022;
EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2;
EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
HP 160GB 3G SATA 7.2K
rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive
Four SATA connectors NOTE: Raid support requires optional
slot based raid controller.
HP 4 Internal Port SAS
HBA with RAID
Drives Supported
Up to 4 SATA/SAS drives
Channels
4
Storage Capacity
1.8TB SAS, 3.0TB SATA
Data Transfer Method
PCI-Express
Maximum SAS Channel Transfer Rate
3Gb/s per channel
Maximum SAS transfer rate
300Mb/sec per port
Protocols Supported
SSP, STP, SMP
Internal Connectors
1 SAS
Embedded NC7782 dual-port
gigabit server adapter
Network Interface
10Base-T/
100Base-TX/
1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3 1000Base-T
IEEE 802.3 100Base-TX
Data Transfer Method
PCI-X
Controller
BCM5704c
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX
(Half and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to
328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP (2 Pair); up to
328 ft (100 m)
Environment-friendly Products and
Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
497763-B21
© 2012 Canada PartsDirect