Supports 1 Intel Pentium 4,
2.8 GHz or 2.53 GHz processor with 512-KB second level ECC cache standard
ServerWorks GC-SL Chipset with 533MHz FSB (2.8GHz
& 2.53GHz models)
256-MB of PC2100 DDR SDRAM running at 266MHz, with
Advanced ECC capabilities standard, expandable to 4 GB
Four total slots available: four 64-bit/33MHz PCI
NC7760 PCI Gigabit Server Adapter (Integrated/Embedded)
Integrated Dual Channel Ultra ATA/100 Adapter with
Integrated ATA RAID 0, 1, & 1+0 (ATA Models) or Integrated Single
Channel Wide Ultra3 SCSI Adapter (SCSI Models)
Support for up to five 1" Ultra3 or Ultra320
Non Hot Plug SCSI hard drives or four 1" ATA NHP Drives (depending
on model)
Internal SCSI storage capacity of up to 818.4 GB
(2 x 300 GB hot plug 1" Ultra320 SCSI hard drives in optional 2x1
hot plug cage + 3 x 72.8 GB non-hot plug Ultra320 SCSI HD)
Usable Internal ATA storage capacity of up to 520
GB (4 x 160 GB 1" ATA/100 drives)
NOTE: The ProLiant ML310 supports
a maximum of 130 GB capacity per ATA drive. When 160-GB ATA hard drives
(PN 366486-B21) are connected to the internal ATA RAID controller, the
ProLiant ML310 recognizes a capacity of 130-GB.
Integrated ATI Rage XL with 8MB SDRAM video
300W Power Supply
Two USB ports
ROM Based Setup Utility (RBSU) and PXE support
Insight Manager, SmartStart and Automatic Server
Recovery-2 (ASR-2)
Protected by HP Services, including a one-year, limited
warranty, Next Business Day 1 year on-site limited Global warranty and
Pre-Failure Warranty, which covers processors, memory, and hard drives
- Certain restrictions and exclusions apply. Consult the Customer Support
Center at 1-800-345-1518 for details.
818.4 GB Internal Maximum SCSI
capacity (2 x 300 GB in optional 2x1 hot plug drive cage + 3 x 72.8 GB)
Maximum Internal Storage (ATA Models)
520 GB (4 x 160.0 GB) (internal
drive bays and removable media bays) NOTE: The ProLiant ML310 supports
a maximum of 130 GB capacity per ATA drive. When 160-GB ATA hard drives
(PN 366486-B21) are connected to the internal ATA RAID controller, the ProLiant
ML310 recognizes a capacity of 130-GB.
HP's new HP Systems Insight
Manager (HP SIM) helps maximize system uptime and performance and
reduce system maintenance costs by providing proactive notification
of problems before those problems result in unplanned downtime or
reduced productivity. HP SIM are both easy to set up work with the
Insight Management Agents, integrated Light-Out and Remote Insight
Light-Outs Edition, and Version Control Agents to deliver robust fault,
configuration, and asset management as well as remote administration.
With HP SIM customers will also be able to take advantage of role-based
security; the ability to manage ProLiant, Integrity, and HP 9000 systems;
and plug-ins for storage, client, printer, and power management as
well as server rapid deployment, performance management, and workload
management. For more details on HP SIM visit http://www.hp.com/go/hpsim.
Management Agents
The Management Agents
form the foundation for HP's Intelligent Manageability strategy. They
provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, and portables, and send alerts
to Insight Manager 7 and other enterprise management applications
in case of subsystem or environmental failures. For additional information
about the Management Agents and other management products from HP,
please visit the management Web site at http://www.hp.com/servers/manage.
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at http://www.hp.com/servers/manage. SmartStart version supported (minimum):
SmartStart 6.40.
Subscriber's Choice
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change
notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ROMPaq, support software, and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options available in SmartStart or downloadable from Software and
Drivers download pages, linked from the SmartStart website at http://www.hp.com/servers/smartstart.
Survey
Utility and diagnostics utilities
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at
your fingertips, available in SmartStart.
Optional ProLiant Essentials
Value Packs
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and
easily adapt to changing business demands.
Workload Management Pack – provides easier management of
complex environments, improving overall server utilization and
enabling Microsoft® Windows® 2000 customers for the first
time to confidently deploy multiple applications on a single multiprocessor
ProLiant Server.
Performance Management Pack – a performance management
solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources..
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Microsoft BackOffice
Small Business Server 2000 Microsoft Windows NT® Server 4.0 Microsoft
Windows 2000 Server Novell NetWare 5.1 Novell Netware 6 Novell NetWare
Small Business Suite 6 LINUX (Red Hat, SuSE)
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack
is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U
server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top
to bottom to permit adequate airflow (equivalent to the required 64
percent open area for ventilation).
Side: The clearance between the
installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE:For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
HP Factory Express Capabilities
HP Factory Express gives you
the flexibility to choose from a full menu of factory capabilities all in
one manufacturing facility, in one process, with one touch giving you full
control and access to HP's World class manufacturing facility anytime. This
approach provides you the speed to deploy your IT needs, with total quality
assurance, reliability, and predictability to lower your total cost of ownership
by letting HP install, rack, and customize your software and hardware options
for you.
Service
and Support
One-year limited warranty, including
hardware diagnostic support, pre-failure warranty (coverage of hard drives,
memory and processors). The warranty is fully supported by HP Services and
a worldwide network of resellers and service providers. In addition 90-day's
getting started software telephone support may be covered under the warranty
or available for an additional fee. Enhancements to warranty services are
available through HP Care Pack services.
NOTE: Limited warranty includes 1
year parts, 1 year labor, 1-year on-site support
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft,
Linux, ProLiant Essentials and VMWare-based IT solutions helping to
deliver high level of application availability. Response times range
from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack Services include HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the
enclosure, as well as 22" and smaller external monitors and tower
UPS options up to 3KVA. 22" and smaller external monitors will be
covered at the same service level and coverage period as the server. For
servers or storage systems installed within a rack, service also covers
all HP qualified rack options installed within the same rack.
NOTE: For more information on HP Care
Pack services, contact any of our worldwide sales offices or resellers
or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information
on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
ProLiant Essentials
Performance Management Pack Single Server License NOTE: This license allows 1 server
to be managed by Performance Management Pack.
306696-B21
ProLiant Essentials
Performance Management Pack Flexible License NOTE: A single pack is shipped with
a single license key for the total number of licenses ordered
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software, please
see the following URL:
http://www.hp.com/servers/proliantessentials.
NetServer to ProLiant
integrations services
HP NetServer to ProLiant
integration and assessment service
304164-002
NOTE:
HP identifies current levels of NetServer support, services, and management.
This service helps maximize customer’s ability to add ProLiant platforms
into their current environment.
HP TopTools to Insight
Manager 7 installation and startup service
304163-002
NOTE: Provides on-site
review, installation and configuration services for Insight Manager 7. HP
will also re-create, as closely as possible, the views and reports from
the customer’s current TopTools configuration. This service assures a smooth
transition to the ProLiant Essentials software.
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
304162-002
NOTE: Install and configure
Rapid Deployment Pack in a test environment, then deploy a server image
to a maximum of 250 systems in the production environment. This service
helps to assure successful system deployment.
Memory
(SDRAM DIMMs)
1024MB of Advanced ECC PC2100
DDR SDRAM DIMM Memory Kit (1 x 1024 MB)
CD-RW/DVD-ROM Combo Drive Option
Kit NOTE: The DVD-ROM drive is supported
in the CD-ROM bay and in the removable media bay. If placed in the removable
media bay, it requires the 2-Device IDE cable (PN 305381-B21).
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates.
36.4 GB U320 10,000 rpm Non-Hot
Plug Hard Drive, (1")
160-GB ATA/100 7,200 rpm Drive
(1") NOTE: The ProLiant ML310 supports
a maximum of 130 GB capacity per ATA drive. When 160-GB ATA hard drives
(PN 366486-B21) are connected to the internal ATA RAID controller, the ProLiant
ML310 recognizes a capacity of 130-GB.
NOTE: In
order to install certain tape drives internally, you may need to remove
the rails that come standard on the drives and then re-insert the
screws in the mounting holes. Mounting screws are shipped standard
with server.
NOTE: To
run external SCSI-based devices, either an Internal-to-External SCSI
Cable Option kit (for SCSI models) or a SCSI controller with external
channel (for ATA models) must be purchased.
Review the server cabling matrix for additional information on cables
required to connect backup products to the server.
External, and Rack-Mount
Ultrium Tape Drives
HP StorageWorks Ultrium
215 Tape Drive, External (Carbon)
NOTE: The
3U Rack-Mount Kit can support up to 2 full-height or 4 half-height
tape drives and compatible with multiple Single-Ended and LVD SCSI
tape drives including DAT, DLT VS80, SDLT 320, Ultrium 215, Ultrium
230, and Ultrium 460 Tape Drives.
HP StorageWorks 5U Rack-Mount
Kit
274339-B21
NOTE: The
5U Rack-Mount Kit can support up to 4 full-height tape drives and
is compatible with SDLT 320, Ultrium 230, and Ultrium 460 tape drives.
HP StorageWorks DAT 40x6 Tape
Autoloader, External (Flint)
C5717C
NOTE: Please see
the DAT 40x6 Tape Autoloader QuickSpecs at http://www.hp.com/go/tape
for additional options such as host bus adapters, controllers and media.
External Storage
– Tower & Rack
NOTE: To run
any external SCSI-based devices, the customer must purchase an Internal
to External Cable Option kit or an additional SCSI controller for SCSI models.
For ATA models, a SCSI controller must be purchased.
HP StorageWorks Modular Smart Array 30 SB NOTE: Rack-mountable 14 drive enclosure
with single bus, redundant power supplies.
302969-B21
HP StorageWorks Modular Smart
Array 30 DB NOTE: Rack-mountable 14 drive enclosure
with dual bus, redundant power supplies.
302970-B21
NOTE: The Modular
Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 1"
Hot Plug Hard Drives.
NOTE:
This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements. This model may also be used with the
high volt UPSs R3000 XR and R6000 For North America, need to order cable
PN 340653-001.
NOTE: Support
for racks with round or square mounting holes (including all Compaq
and HP Rack System /E and HP Systems), with an adjustment range of
24" – 36".
Other
ProLiant ML310 SCSI Cable Kit
273463-B21
NOTE: This SCSI
Cable Kit (PN 273463-B21) is required when installing an internal tape drive
and a SCSI Controller. NOTE: This kit is supported on the ML310 and ML330 G2 servers.
Internal to External SCSI Cable
Option Kit (HD68)
159547-B22
Internal to External SCSI Cable
Option Kit (VHDCI)
333370-B21
Telco Rack Option Kit
251243-B21
NOTE: Support
for all 2-post Telco racks requires the use of the standard four post rack
kit and an additional option kit from HP.
NOTE:
-B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) -B23 (crated) used for air shipments of empty racks
Factory Installation, Racking, and Customization Services
Factory Express Server Configuration Level 1
293355-888
NOTE:
Free Installation of HP Options - Installation of HP Options memory, NICs, hard
drives, controllers, processors, I/O cards, pre-install standard OEM OS image,
and tape drives. Installation fees will apply to all non-HP certified hardware
and asset tags.
Factory Express Server Configuration
Level 2
266326-888
NOTE:
Includes Level 1 Customer Intent of a ProLiant server and options configuration,
OS installation, custom image download, IP addressing, network setting, and custom
packaging. Customer unique requirements (quick restore creation, cd duplication,
test reports, real-time reporting of server MAC address, password, and RILOE).
Customer access, validation and control through VPN (price/server).
Service
and Support Offerings (HP Care Pack Services)
Hardware Services 4-Hour On-site Service
9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for U.S.)
162676-002
9-Hour
x 5-Day Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-EL4HR-36
9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for EMEA)
324416-002
24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for U.S.)
162675-002
24-Hour
x 7-Day Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-EL724-36
24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for EMEA)
376910-022
Hardware
Services Next Business Day On-Site Service
9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for U.S.)
102407-002
9-Hour
x 5-Day Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-ELXHW-36
9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for EMEA)
206947-022
Hardware
Installation (6-3 Part Number for US)
401791-002
Hardware
Installation (2-5-2 Part Number for Canada)
FP-ELINS-IN
Hardware
Installation (6-3 Part Number for EMEA)
Quote
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Win NT Operating System
plus up to 1 days start-up activity, configure print & network access services,
and orientation. (6-3 Part Number for U.S.)
240013-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Win NT Operating System
plus up to 1 days start-up activity, configure print & network access services,
and orientation. (2-5-2 Part Number for Canada)
FM-MSTEC-01
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Novell NetWare Operating
System plus up to 1 days start-up activity, configure print & network access
services, and orientation (6-3 Part Number for U.S.)
240008-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Novell NetWare Operating
System plus up to 1 days start-up activity, configure print & network access
services, and orientation (2-5-2 Part Number for Canada)
FM-NSTEC-01
Server
Installation and Set-Up (Installation of the server, installation of the appropriate
service tools, check to ensure device SW and firmware is loaded and installationof
the operating system software (6-3 Part Number for EMEA)
204563-022
HP
Care Pack Priority Services for ProLiant Servers – Priority Level
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239928-002
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (2-5-2 Part Number for Canada)
FM-M01E1-36
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Novell NetWare Operating System, Next Available Specialist
(6-3 Part Number for U.S.)
239968-002
9 x 5 4-hour H/W, 5 x 9 2-hour
O/S (NT & NetWare), Three Years (6-3 Part Number for EMEA.)
179834-021
HP
Care Pack Priority Services for ProLiant Servers – Priority 24 Level
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239930-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Novell NetWare Operating System, Next Available Specialist (6-3 Part
Number for U.S.)
239970-002
7 x 24 4-hour H/W, 7 x 24 2-hour
O/S (NT & NetWare), Three years (6-3 Part Number for EMEA)
179839-022
HP Care Pack Priority
Services for ProLiant Servers – Priority Silver
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System, Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (6-3 Part Number for U.S.)
239932-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System, Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (2-5-2 Part Number for Canada)
FM-M04E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System (6-3 Part Number for U.S.)
239934-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System (2-5-2 Part Number for U.S.)
FM-M24E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Novell NetWare Operating System, Technical Account Manager, Technical
Newsletter, SW activity review (6-3 Part Number for U.S.)
239972-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Novell NetWare Operating System, Technical Account Manager, Technical
Newsletter, SW activity review (6-3 Part Number for Canada)
FM-N04E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Novell NetWare Operating System Operating System, Technical Account Manager,
Technical Newsletter, SW activity review (6-3 Part Number for U.S.)
239974-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Novell NetWare Operating System Operating System, Technical Account Manager,
Technical Newsletter, SW activity review (2-5-2 Part Number for Canada)
Standard Memory
256-MB of 2-way PC2100 DDR SDRAM running at 266MHz, with Advanced ECC
capabilities Memory installed (1 x 256-MB SDRAM DIMM) (on 2.8GHz &
2.53GHz models).
Standard Memory Plus Optional
Memory
Up to 3328-MB memory is available with the optional installation of PC2100
Registered ECC DDR SDRAM DIMM Memory kits (on 2.8GHz & 2.53GHz models).
Standard Memory Replaced with Optional Memory
Up to 4096-MB of memory is available with the removal of the standard
128-MB or 256-MB of memory and the optional installation of PC2100 Registered
ECC DDR SDRAM DIMM Memory kits.
NOTE: Charts do not represent all
possible memory configurations.
Memory
Slot
1
2
3
4
Standard
256MB
256 MB
Empty
Empty
Empty
Optional
3328 MB
256 MB
1024 MB
1024 MB
1024 MB
Maximum
4096 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from HP:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
NOTE: On ATA
models, must install an optional PCI-based SCSI controller to use these drives. NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3
speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI
HBA to support U320 transfer rates.
NOTE: The ProLiant
ML310 supports a maximum of 130 GB capacity per ATA drive. When 160-GB ATA
hard drives (PN 366486-B21) are connected to the internal ATA RAID controller,
the ProLiant ML310 recognizes a capacity of 130-GB.
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
Modular Smart Array 30 Family
External
Smart Array 642 Controller
Maximum Storage Capacity - ATA Models
(SCSI Attached (StorageWorks Enclosure))
Internal
520 GB (4 x 160.0
GB) (internal drive bays and removable media bays) NOTE: The ProLiant ML310 supports
a maximum of 130 GB capacity per ATA drive. When 160-GB ATA hard drives
(PN 366486-B21) are connected to the internal ATA RAID controller, the ProLiant
ML310 recognizes a capacity of 130-GB.
External
29.400 TB (14 x 300
GB) x 7 (Requires additional SCSI controllers in slots)
Total
30.040 TB
Maximum Storage Capacity - SCSI Models
(SCSI Attached (StorageWorks Enclosure))
Internal
818.4 GB (2 x 300
GB hot-plug hard drives in optional 2x1 hot plug hard drive cage + 3 x 72.8
GB non-hot-plug hard drives)
System Leakage with all
power supplies loaded (mA)
0.31
0.36
0.65
0.69
0.72
0.75
System Inrush Current with all power supplies loaded (A)
63
72
130
138
144
150
Power cord requirements
Nema 5-15P to IEC320-C13
Option
no./Spare no: 227099-001/187335-001
IEC320-C13
to IEC320-C14
Option no./Spare no: 142257-001/142258-B21
Example of real input watts consumed versus rated watts consumed is available
via the online tool located at url: http://inline.compaq.com/pg/ecg/issd/power/psupply.asp
select system calculator for one of the systems and reference the green fields
at the bottom of the calculator.
To
drill down to calculators: – Click on: "ProLiant Servers"
– Click on the Server of interest. Example: ML310 – Click
on: "Power Calculator" link (You may need to scroll down to see it.)
NOTE:
Support for either one internal or one external SCSI channel is available.
This is achieved using an internal to external SCSI cable option kit (PN 159547-B22)
and SCSI knockout bracket.
Canadian Site
DL Quickspecs
Search:
US QuickSpecs 
366486-B21
© 2014 USA PartsDirect