The HP ProLiant ML150 G6 is an expandable and affordable
solution for growing businesses. Redundant power supply and redundant
fan options help to provide more protection on power and thermal to keep
your critical business running. Data security, which is one of the major
concerns in the industry, is ensured by the TPM offering that provides
data encryption to protect from data theft. Companies with remote locations
can take advantage of the ML150 G6 embedded Lights-Out 100 remote management
feature to decrease server/company downtime, decrease emergency travel
needs, and increase overall productivity. Overall, the HP ProLiant ML150
G6 is easy on your IT budget with significant headroom to grow with your
business.
NOTE: For the
Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
Processor One of the following depending on Model
Quad-Core Processors
Intel® Xeon® Processor
E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details
Intel® Xeon® Processor
E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details
Intel® Xeon® Processor
E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800) NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details
NOTE: HT indicates
that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number
indicates the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
Cache Memory One of the following depending on configuration
48 GB (12 x 4 GB) for Registered
Memory configurations
Maximum (UDIMM)
48 GB (12 x 4 GB) for Unbuffered
Memory configurations
NOTE:
Depending on the memory configuration and processor model the memory speed
may run at 1066MHz or 800MHz. See the Online Memory Configuration Tool for
details: http://www.hp.com/go/ddr3memory-configurator.
Network Controller
Embedded HP NC107i PCI Express
Gigabit Server Adapter
Expansion Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
32-bit/33MHz PCI
N/A
N/A
1
Full length, full height slot
Non Hot-plug
2
PCI-Express
(Gen 1)
x4
x8
2
Full length, full height slot
Non Hot-plug
3
PCI-Express
(Gen 2)
x4
x8
7
Full length, full height slot
Non Hot-plug
4
PCI-Express
(Gen 2)
x16
x16
5
Full length, full height slot
Non Hot-plug
5
PC-Express
(Gen 2)
x4
x8
6
Full length, full height slot
Non Hot-plug
* Default bus assignment
(in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Indicates the number of physical electrical lanes running to a PCI-e
connector.
Storage
Controller
Entry Model
HP Smart Array B110i SATA RAID
Controller (RAID 0,1,10) NOTE: To enable RAID for HP Smart
Array B110i SATA controller, use EZ set-up CD to download driver, hpahcisr.sys,
part of EZ Set-up CD
For more information go to: www.hp.com/go/sataraid. NOTE: SA B110i SATA RAID Controller ships standard with every server.
Base Model
HP Smart Array P410/Zero Memory
RAID Controller (RAID 0,1std)
Performance
Model
HP Smart Array P410/256MB
RAID Controller (RAID 0/1/1+0/5/5+0)
Internal Storage
Devices
Diskette
Drive
None ships standard
Optical Drive
HP
Half-Height SATA DVD-ROM Optical Drive ships standard
Hard
Drive
Performance and Base Models
(Hot Plug): None ships standard
Entry
Model (Non-Hot Plug): 1x160GB NHP SATA Drive
NOTE: Support
for additional 4 LFF SAS/SATA hot plug drive requires 2nd hot-plug hard
disk drive cage, 750W CS HE Power Supply, Redundant Power Supply Enablement
Kit and HP Smart Array P410 Controller (if not already part of the configuration).
Maximum
Internal Storage
SATA
16.0TB (8 x 2TB 3.5") SATA
SAS
16.0TB (8 x 2TB 3.5") SAS
NOTE:
HP Smart Array B110i SATA RAID controller support for a single logical drive
is limited to 2TB. NOTE: Support for more than 4 hard drives requires the purchase of
one (1) Hot-plug hard drive cage (P/N: 487737-B21), one (1) HP 750W CS HE
Power Supply (P/N: 512327-B21), one (1) Redundant Power Supply Enablement
Kit (P/N: 508544-B21) and HP Smart Array P410 Controller (if not already
part of the configuration). NOTE: Supports up to eight (8) SAS/SATA hard drives via 2nd hot plug
hard disk drive cage, 750W CS HE Power Supply, Redundant Power Supply Enablement
Kit and HP Smart Array P410 Controller. NOTE: HP NHP Internal SAS/SATA 4 Port Cable Kit (487734-B21) is required
when adding Smart Array P410 Controller on Non-Hot Plug SATA/SAS server
models.
HP Lights-Out 100i Baseboard
Management Controller
Industry Standard
Compliance
ACPI V2.0 compliant
PCI 2.3 compliant
IPMI 2.0
DCMI 1.0
PXE Support
WOL Support
Microsoft® Logo certifications
Server
Power Cord
One Lowline NEMA
power cord
Power
Supply
Standard: 460W Non-Hot
Plug, Non redundant Power Supply (70% efficiency)
Optional:
750W CS HE Gold Hot Plug Power Supply (92% efficiency)
NOTE: The installation
of the optional 750W Redundant Power Supply requires a HP Redundant Power
Supply Enablement Kit (P/N 508544-B21). NOTE: Two (2) 750W Redundant Power Supply units and one (1) RPS enablement
kit (P/N 508544-B21) are required to achieve redundancy. NOTE: The 2nd hot plug hard disk drive cage requires the purchase
of 750W Redundant Power Supply, Redundant Power Supply Enablement Kit and
HP Smart Array P410 Controller (if not already part of the configuration)
System Fans
System supports a total of four(4)
fans
Two (2) fans ship standard for
1P configuration - Non-hot plug, Non-redundant system fans NOTE: For redundancy, please order
a redundant fan option kit (513927-B21) which comes with 2 fans
Three(3) fans ship standard
for 2P configuration NOTE: If customer orders the standalone
redundant fan option kit (513927-B21), two (2) fans in a two-fan packaged
box will be received. Only one (1) fan is required for system redundancy.
The other one can be saved as a spare part. NOTE: If customer orders the redundant fan kit along with the server,
the extra fan will not be received.
Operating
Systems and Virtualization Software Support for ProLiant Servers
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your
server, please visit our Support Matrix at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/ML150G6
Graphics
32MB shared supporting all display resolutions up to 1600x1200 16bpp
@75Hz NOTE: 8MB is dedicated to video
memory.
Form Factor
Tower (5U) NOTE: Rack mounting available via
HP Tower to Rack Conversion Tray, Universal Kit. Please see the options
section in this QuickSpecs.
Embedded Manageability
HP LO100i Advanced
HP LO100i Lights-Out 100 Baseboard Management Controller with Optional
LO100i Advanced Licenses for Virtual KVM and Virtual Media.
Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
DCMI 1.0
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual media (Floppy, CD, USB 2.0) with Advanced License
Virtual KVM with Advanced License
NOTE: For more
information, please refer to the QuickSpecs for the LO100i found at: www.hp.com/go/lo100
Manageability
HP Integrated Lights-Out 100i
Baseboard Management Controller with optional LO100i Advanced Licenses for
Virtual KVM and Virtual Media.
Embedded IPMI standard reporting
Easy Set-up CD and ISO Image Web downloads
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems
Insight Manager (SIM) Integration
This product is covered by a
global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair
is available for one year from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services or customized
service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 1
year Parts, 1 year Labor, 1-year on-site support with next business day
response. (3-1-1 warranty offered only in Brazil and APeJ). Warranty repairs
may be accomplished through the use of Customer Self Repair (CSR) parts.
These parts fall into two categories: 1) Mandatory CSR parts are designed
for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also
designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging and custom packaging
to meet customer needs. HP products supported through Factory Express
include a wide array of servers and storage: HP Integrity, HP ProLiant
& HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable
network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance. http://www.hp.com/products/configurator.
HP Care Pack Services: Packaged server and storage services for increased
uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a
good time to think about what levels of support you may need. Our portfolio
of service options reduce deployment and management worries while helping
you get the most out of your server and storage investments. We take a
holistic approach to your environment, bridging servers, blades, storage,
software and network infrastructures with our packaged HP Care Pack Services
for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment
warranties have matured along with technology. Good news that can also
create problems stemming from depending on standard warranties designed
to only protect against product defects and some downtime causes. Using
a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and
storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software
support services suite sold separately, or combined with our Support Plus
and Support Plus 24 services. The portfolio also provides a combination
of integrated proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition with HP Proactive Select, you can acquire
the specific proactive constancy and technical services. HP Proactive
Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum
of customer care-from technology support to complex migrations to complete
managed services. HP Factory Express provides customization, integration
and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend
innovative financing and cost-effective asset management programs-from
purchase to equipment retirement.
Recommended HP Care
Pack Services for optimal satisfaction with your HP product
Recommended Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 13x5
Delivers increased equipment availability and productivity with rapid
remote support and onsite response for your HP server and storage hardware.
3-Year HP Hardware Support Onsite Service, next-day response, 9x5
Provides high-quality remote assistance and onsite support for your covered
hardware if required, helping you to improve product uptime.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
Expedited installation, with all service prerequisites met before
the installation is performed
Installation in accordance with manufacturer's specifications, enhancing
the supportability of your HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during
the onsite delivery of this service
Optional HP Care
Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
As an alternative to our recommended support level, for customers who
need same day response service level 24x7.
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged.
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6-
or 24-hour
As an alternative to our recommended support level, for customers who
need committed call-to-repair for server hardware.
Provides your IT manager with a team of support specialists who will
quickly begin troubleshooting the system to help return the hardware to
operating condition within 6 or 24 hours of the initial service request
to the HP Global Solution Center. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services
and education courses
Provides a flexible way to purchase HP best-in-class consultancy and
technical services. You can buy Proactive Select Service Credits when
you purchase your hardware and then use the credits over the next 12 months.
HP eSupport is a portfolio of technology-based services that assist
you with managing your business environment - from the desktop to the
data center.
Support Portal
The HP support portal provides one-stop access to the information, tools
and services you need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service
agreement. To access the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for
your HP Servers and Storage, 24 X 7, so you can spend less time solving
problems and more time focused on your business. You can have your systems
remotely monitored for hardware failure using secure technology that's
been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
Customer Technical Training
In today's cost-conscious business environment, IT professionals, developers,
consultants and users face an interesting challenge: how to keep up with
the latest technologies and expand important skills while delivering profitable
results on current projects. To help address this challenge, HP offers
innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support
excellence by customers, partners, industry organizations and publications
around the world. Recent honors and award reflect our services team's
dedications, technical expertise, professionalism and uncompromising commitment
to customer satisfaction.
SAS/SATA Hot Plug Models NOTE: For the Standard Features
shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below.
Options can be selected from the Core or Additional options section of
this QuickSpecs. NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs.
NOTE: Not all models are available in all regions. Check with your
local country HP offices for availability.
NOTE: The following Performance and Base hot -plug models can support
up to 4 hard drives only. Support for more than 4 hard drives (maximum
8 hard drive support on this server) require the purchase of one (1) Hot-plug
hard drive cage (P/N: 487737-B21), one (1) HP 750W CS HE Power Supply
(P/N: 512327-B21), and one (1) Redundant Power Supply Enablement Kit (P/N:
508544-B21).
Performance Model
HP ML150G6 E5520 2.26 GHz, 4GB, SAS/SATA Performance server (1P)
466133-xx1
SAS: 8.0TB (4 x 2TB 3.5")
Maximum
SATA: 8.0TB (4 x 2TB 3.5") Maximum
Optical Drive
HP Half-Height SATA DVD-ROM
Optical Drive
Power Supply
460W Non-Hot Plug, Non-Redundant
Power Supply (70% efficiency)
Fans
Two (2) - Non-hot plug, Non-redundant
system fans
Form Factor
5U Tower
Warranty
Server Warranty includes 1
year Parts, 1 year Labor, 1-year on-site support with next business day
response. (3-1-1 warranty offered only in Brazil and APeJ)
Base Model
HP ML150G6 E5504 2.0GHz, 2GB, SAS/SATA Base server (1P)
466132-xx1
2 GB (1 x 2GB) PC3-10600E Unbuffered
Advanced ECC memory NOTE: Total 12 DIMM slots
Network Controller
Embedded HP NC107i PCI Express
Gigabit Server Adapter
Storage Controller
HP Smart Array P410 controller
w/ Zero Memory cache Raid Controller (RAID 0,1, 0+1)
Hard Drive
None ships standard
Internal Storage
SAS: 8.0TB (4 x 2TB 3.5")
Maximum
SATA: 8.0TB (4 x 2TB 3.5") Maximum
Optical Drive
HP Half-Height SATA DVD-ROM
Optical Drive
Power Supply
460W Non-Hot Plug, Non-Redundant
Power Supply (70% efficiency)
Fans
Two (2) - Non-hot plug, Non-redundant
system fans
Form Factor
5U Tower
Warranty
Server Warranty includes 1
year Parts, 1 year Labor, 1-year on-site support with next business day
response. (3-1-1 warranty offered only in Brazil and APeJ)
SATA Non-Hot Plug Models NOTE: For the Standard Features
shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options
can be selected from the Core or Additional options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs.
NOTE: Not all models are available in all regions. Check with your
local country HP offices for availability.
NOTE: The following Entry non-hot plug model can support up to 4 hard
drives only. Support for more than 4 hard drives (maximum 8 hard drive
support on this server) require the purchase of one (1) Hot-plug hard
drive cage (P/N: 487737-B21), one (1) HP 750W CS HE Power Supply (P/N:
512327-B21), one (1) Redundant Power Supply Enablement Kit (P/N: 508544-B21)
and HP Smart Array P410 Controller with HP NHP Internal SAS/SATA 4 Port
Cable Kit (487734-B21). NOTE: A hot-plug hard drive cage can be installed into a non-hot
plug server by ordering one (1) hot-plug hard disk drive cage option kit
(P/N 487737-B21) and a Smart Array P410 controller with HP NHP Internal
SAS/SATA 4 Port Cable Kit (P/N 487734-B21).
Entry Model
HP ML150G6 E5502 1.86 GHz DC, 2GB NHP SATA (1P)
466131-xx1
2 GB (1 x 2GB) PC3-10600E Unbuffered
Advanced ECC memory NOTE: Total 12 DIMM slots
Network Controller
Embedded HP NC107i PCI Express
Gigabit Server Adapter
Storage Controller
HP Smart Array B110i SATA RAID
Controller (RAID 0,1,10)
Hard Drive
One 160GB Non-Hot Plug SATA
HDD
Internal Storage
SATA: 8.0TB (4 x 2TB 3.5")
Maximum
Optical Drive
HP Half-Height SATA DVD-ROM
Optical Drive
Power Supply
460W Non-Hot Plug, Non-Redundant
Power Supply (70% efficiency)
Fans
Two (2) - Non-hot plug, Non-redundant
system fans
Form Factor
5U Tower
Warranty
Server Warranty includes 1 year
Parts, 1 year Labor, 1-year on-site support with next business day response.
(3-1-1 warranty offered only in Brazil and APeJ)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for information on CTO product offerings and requirements. NOTE: HP
does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
Step
1: Base Configuration
HP
Models
HP ProLiant ML150
G6 Configure-to-order Tower Server
487912-B21
Factory Integrated
Models ship with:
Embedded NC107i
Embedded B110i SATA RAID Controller (RAID 0/1/10)
PCA
Easy Set up CD
Keyboard and Mouse (selection required)
Power Cord
Tower 5U Form Factor
Step
2: Choose Required Options (Select only one option from each category unless
otherwise noted)
HP
Processors
Quad-Core Processor
HP ML150 G6 Intel®
Xeon® E5540 (2.53GHz/4-core/8MB/80W) FIO Processor Kit
507849-B21
HP ML150 G6 Intel®
Xeon® E5530 (2.40GHz/4-core/8MB/80W) FIO Processor Kit
507848-B21
HP ML150 G6 Intel®
Xeon® E5520 (2.26GHz/4-core/8MB/80W) FIO Processor Kit
507722-B21
HP ML150 G6 Intel®
Xeon® E5506 (2.13GHz/4-core/4MB/80W) FIO Processor Kit
507847-B21
HP ML150 G6 Intel®
Xeon® E5504 (2.00GHz/4-core/4MB/80W) FIO Processor Kit
507721-B21
Dual-Core Processor
HP ML150 G6 Intel®
Xeon® E5502 (1.86GHz/2-core/4MB/80W) FIO Processor Kit
NOTE:
All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
HP
Optical Drives
HP Half-Height SATA
DVD-ROM Optical Drive
447326-B21
HP Half-Height SATA
DVD RW Optical Drive
447328-B21
HP
Drive Cage Options
NHP HDD model: Non-hot
plug hard disk drive cage FIO kit NOTE: If non-hot plug drive cage
is selected, then at least one non-hot plug SATA or SAS hard drive must
be selected. NOTE: Non-hot plug drive cage only supports non-hot plug drives.
500448-B21
HP HDD model: Hot-plug
hard disk drive cage option FIO kit NOTE: Hot-plug drive cage only supports
hot-plug drives. NOTE: Support for more than 4 hard drives requires the purchase of
one (1) Hot-plug hard drive cage (P/N: 487737-B21), one (1) HP 750W CS HE
Power Supply (P/N: 512327-B21), one (1) Redundant Power Supply Enablement
Kit (P/N: 508544-B21) and HP Smart Array P410 Controller (if not already
part of the configuration) NOTE: HP NHP Internal SAS/SATA 4 Port Cable Kit (487734-B21) is required
when adding Smart Array P410 Controller to a non-hot plug SATA server model.
487737-B21
HP
Hard Drives
NOTE:
The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate
or the system bandwidth will be negotiated down to an acceptable level for
all components. NOTE: Mixing SAS and SATA hard drives is allowed. However, only SAS
hard drives will be used for RAID setting. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Non-Hot Plug
LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K
rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
NOTE:
To support RAID 5, HP P410 requires at least 256MB Cache NOTE: To support RAID 6, HP P410 requires at least 256MB Cache +
Battery + SAAP or 512MB BBWC + Smart Array Advanced Pack (SAAP) license
key.
Smart Array P411 Controller.
Smart Array P411
Controller
HP Smart Array P411/256
2-ports Ext PCIe x8 SAS Controller
HP 650 mAh P-Series
Battery NOTE: To enable BBWC on the 256MB
cache. NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array
P410 Controller, and HP Smart Array P411 Controller only.
462969-B21
HP Smart Array Advanced
Pack including 1yr 24x7 Technical Support and Updates Single Server License NOTE: Smart Array Advanced Pack (SAAP)
is a license key to activate RAID 6 and the advance feature sets provided
by the controller.
This part number (516471-B21) can be used to purchase a single SAAP license
or to order multiple licenses with a single activation key. Customers will
receive a license entitlement certificate via e-mail. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Include one year of 24x7 HP Software Technical Support
Services.
516471-B21
SCSI HBA
HP SC11Xe Ultra320
Single Channel/ PCIe x4 SCSI Host Bus Adapter NOTE: Recommended HBA for SCSI tape
drive connection.
HP ML150G6 460 Watts
Non-hot Plug Power Supply Factory Integrated Kit
500447-B21
HP 750W Common Slot
High Efficiency Power Supply Kit NOTE: 750W RPS requires one (1) RPS
Enablement Kit 5U G6 (P/N 508544-B21).. NOTE: Two (2) 750W PSUs and one (1) RPS enablement kit are required
to achieve redundancy. NOTE: The 2nd hot plug hard disk drive cage requires the purchase
of 750W Redundant Power Supply, Redundant Power Supply Enablement Kit and
HP Smart Array P410 Controller (if not already part of the configuration).
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP Processors
Quad-Core Processors
HP ML150 G6 Intel® Xeon®
E5540 (2.53GHz/4-core/8MB/80W) Processor Kit
507849-B21
HP ML150 G6 Intel® Xeon®
E5530 (2.40GHz/4-core/8MB/80W) Processor Kit
507848-B21
HP ML150 G6 Intel® Xeon®
E5520 (2.26GHz/4-core/8MB/80W) Processor Kit
507722-B21
HP ML150 G6 Intel® Xeon®
E5506 (2.13GHz/4-core/4MB/80W) Processor Kit
507847-B21
HP ML150 G6 Intel® Xeon®
E5504 (2.00GHz/4-core/4MB/80W) Processor Kit
507721-B21
Dual-Core Processor
HP ML150 G6 Intel® Xeon®
E5502 (1.86GHz/2-core/4MB/80W) Processor Kit
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
HP Optical Drives
HP Half-Height SATA DVD-ROM Optical
Drive
447326-B21
HP Half-Height SATA DVD RW Optical
Drive
447328-B21
HP Drive Cage Options
Hot-plug hard drive disk cage
option kit NOTE: A 2nd hot-plug hard disk drive
cage option kit is needed to support more than 4 hard drives.
487737-B21
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Transfer rates of drives are dependent on the maximum transfer
rate supported by the HBA or Controller. Refer to the HBA or Controller
technical specifications for details. NOTE: Mixing SAS and SATA hard drives is allowed. However, only SAS
hard drives will be used for RAID setting. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug LFF (3.5-inch) Midline
(MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch)
Midline 1yr Warranty Hard Drive
NOTE: The previous
generations of 1.5G SATA non-hot plug hard drives are supported. These drives
can be purchased as an option. However, they can no longer be configurable.
SAS Non-Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch)
Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
HP Power Supplies
Power Supplies
HP 750W Common Slot High Efficiency
Power Supply Kit NOTE: 750W RPS requires a Redundant
Power Supply Enablement Kit 5U G6 (P/N 508544-B21). Two (1) 750W PSUs and
one (1) RPS enablement kit are required to achieve redundancy.
HP 5U G6 Redundant fan kit NOTE: Option Kits contain optional
power supply, an IEC power cable and PDU IEC cables. NOTE: Two (2) fans ship standard for 1P configuration. For redundancy,
please order a redundant fan option kit (513927-B21) which ships with 2
fans. NOTE: Three (3) fans ship standard for 2P configuration. If customer
orders the standalone redundant fan option kit (513927-B21), two (2) fans
in a two-fan packaged box will be received. Only one (1) fan is required
for system redundancy. The other one can be saved as a spare part. NOTE: If customer orders the redundant fan kit along with the server,
the extra fan will not be received.
NOTE: Some options may not be integrated
at the factory. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for additional information.
HP Entry-Level
Server Management
HP LO100i Advanced Pack, No Media
1-Server License including 1 year of 24x7 Technical Support and Updates
530521-B21
NOTE: Other license
types available, please check LO100i Advanced QuickSpecs at: http://www.hp.com/go/lo100
for more details.
HP Port Options
HP Non-Hot Plug Internal SAS/SATA
4 Port Cable Kit NOTE: This cable is required when
adding Smart Array P410 Controller on Non-Hot Plug SATA/SAS server models.
487734-B21
HP Security - TPM
HP Trusted Platform Module Option
Kit NOTE: The TPM (Trusted Platform Module)
is a microcontroller chip that can securely store artifacts used to authenticate
the server platform. These artifacts can include passwords, certificates
and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker)
is a data protection feature available in Windows Server® 2008. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data
and to ensure that a server running Windows Server 2008 has not been tampered
with while the system was offline. NOTE: For more information about TPM, including a white paper, go
to: www.hp.com/go/TPM NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss.
488069-B21
HP Storage Controllers
SAS Controller
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports
Int/1-ports Ext PCIe x8 SAS Controller
NOTE: To support
RAID 5, HP P410 requires at least 256 MB Cache. NOTE: To support RAID 6, HP P410 requires at least 256 MB Cache +
Battery + SAAP or 512MB BBWC + SAAP.
Smart Array P411 Controller
HP Smart Array P411/256 2-ports
Ext PCIe x8 SAS Controller
HP 650 mAh P-Series Battery NOTE: To enable BBWC on the 256MB
cache. NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array
P410 Controller, and HP Smart Array P411 Controller only.
462969-B21
HP Non-Hot Plug Internal SAS/SATA
4 Port Cable Kit NOTE: NHP Internal SAS/SATA 4 Port
Cable (487734-B21) is required when adding Smart Array P410 Controller on
Non-Hot Plug SATA/SAS server models.
487734-B21
HP Smart Array Advanced Pack including
1yr 24x7 Technical Support and Updates Single Server License NOTE: Smart Array Advanced Pack (SAAP)
is a license key to activate RAID 6 and the advance feature sets provided
by the controller.
This part number (516471-B21) can be used to purchase a single SAAP license
or to order multiple licenses with a single activation key. Customers will
receive a license entitlement certificate via e-mail. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Include one year of 24x7 HP Software Technical Support
Services.
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup
products see: http://www.hp.com/go/connect. NOTE: Connection using HP P212 Smart Array Controller SAS ( 462828-B21)
recommended.
HP StorageWorks DAT 320 USB Internal
Tape Drive
AJ825A
HP StorageWorks DAT 320 SAS Internal
Tape Drive
AJ830A
HP StorageWorks Ultrium 448 SAS
Internal Drive
DW085A
HP StorageWorks Ultrium 920 SAS
Internal Tape Drive
EH847A
HP StorageWorks 1/8 G2 Ultrium
920 SAS Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack-Mount Kit (AH166A) for rack installation.
AH558A
HP StorageWorks MSL2024 Ultrium
920 SAS Tape Library
AH559A
HP StorageWorks MSL2024 1 LTO-5
Ultrium 3000 SAS Tape Library
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
NOTE: These are
network connected appliances with connectivity using the iSCSI protocol.
If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
HP StorageWorks RDX1000 Internal
Removable Disk Backup System
BV847A
USB Removable Media RDX Disk Backup
Systems
HP StorageWorks RDX320 Internal
Removable Disk Backup System NOTE: 320GB of disk capacity per
data cartridge.
AJ767A
HP StorageWorks RDX500 Internal
Removable Disk Backup System NOTE: 500GB of disk capacity per
data cartridge.
AJ934A
HP Uninterruptible Power Systems
HP Tower UPS
HP T750 G2 UPS Models
HP T750 G2 750VA NA Tower Uninterruptible
Power System
AF446A
HP T750 G2 750VA INTL Tower Uninterruptible
Power System
AF447A
HP T750J JP Uninterruptible Power
System
AF456A
HP T1000 G3 UPS Models
HP T1000 G3 1000VA INTL Tower
Uninterruptible Power System
AF449A
HP T1000 G3 1000VA NA Tower Uninterruptible
Power System
NOTE: For additional
information on sizing your server, please reference: http://www.upssizer.com NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
NOTE:
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used,
observe the following additional requirements to ensure adequate airflow
and to prevent damage to the equipment:
Front and rear doors: If your 42U server
rack includes closing front and rear doors, you must allow 830 square
inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open
area for ventilation).
Side: The clearance between the installed
rack component and the side panels of the rack must be a minimum of
2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE:
HP ProLiant DL rack models have fixed rails which provide support for
racks with round mounting holes and tool-free support for racks with square
mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with
an adjustment range of 26" - 36". NOTE: Support for all 2 and 4 post Telco racks and threaded hole
racks requires an additional option kit from Rack Solutions. The Rack Solutions
brackets can be purchased at: www.hp.com/go/rackandpower.
HP Rack Options
HP KVM Switch Options
HP 1x1Ex8 KVM IP CNSL G2 VM CAC
SW
AF620A
HP 2x1Ex16 KVM IP CNSL G2 VM CAC
SW
AF621A
HP 4x1Ex32 KVM IP CNSL G2 VM CAC
SW
AF622A
HP 0x2x8 KVM SVR CNSL G2 SW
AF616A
HP 0x2x16 KVM SVR CNSL G2 SW
AF617A
HP 0x2x16 KVM SVR CNSL G2 VM CAC
SW
AF618A
HP 0x2x32 KVM SVR CNSL G2 VM CAC
SW
AF619A
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Rack Kits
HP Tower to Rack Conversion Tray,
Universal Kit
417705-B21
HP USB and SD Options
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver)
NOTE: For the
installation of Windows and other OS's, a floppy drive or the HP USB Floppy
Drive Key may be required to complete driver installation. A standard USB
drive key may not work to complete driver installation.
HP Care
Pack Services
Extended Care
Next Business Day On-Site Service,
9-Hour x 5-Day Coverage, 3 Years, Electronic
U8184E
Committed Care
Same Business Day On-Site Service, 4 Hour Response, excluding holidays,
13-Hour x 5-Day Coverage, 3 Years, Electronic
Some DIMM installation guidelines are summarized below:
For the HP ProLiant ML150 G6 server with twelve (12)
memory slots
There are three (3) channels per processor; six (6)
channels per server
There are two (2) DIMM slots for each memory channel;
twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that
are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that
are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered
memory (RDIMMs)
Do not install DIMMs if the corresponding processor
is not installed
If only one processor is installed in a 2CPU system,
only half of the DIMM slots are available
To maximize performance, balance the total memory
capacity between all installed processors
It is not required, but it is recommended to load
the channels similarly if possible
You can only have up to eight (8) ranks installed
per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available,
the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to
lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel
goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated.
Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated.
DIMMs in channels 1 and 2 will be installed in pairs.
The paired slots will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5;
on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same
voltage
DIMM Type
Registered
DIMMs (RDIMMs)
Unbuffered
DIMMs (UDIMMs)
DIMM Rank
Dual Rank
(2R)
Quad Rank
(4R)
Single Rank
(1R)
Dual Rank
(2R)
DIMM Capacity
2GB
4GB
2GB
4GB
1GB
2GB
2GB
4GB
DIMM Native Speed (MHz)
1333
1333
*
1066
1333
*
1333
1333
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
*
12
12
*
12
12
MAXIMUM CAPACITY (GB)
12 slot servers
24
48
*
48
12
*
24
48
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
*
1066
1333
*
1333
1333
2 DIMM Per Channel
1066
1066
*
800
1066
*
1066
1066
* - not supported
by HP at this time.
NOTES:
Mixing DIMM speeds is allowed, but the system processor speed rules
always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum
clock rate of all DIMMs in the system - even if the slower DIMM is on
the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in
channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with
1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all
other channels, you run at 800MHz
95 Watt CPU's are required for 1333MHz DIMM speeds
References to the above MHz speeds are for the various speeds of DDR3
DIMMs; 1333 refers to DDR3-1333, etc.
Standard Memory
All HP ML150 G6 models ship with 12 DIMM sockets.
Factory Integrated Models include the memory capacity of your choice.
Basic memory slot and population diagram
Population order; start with "A" first, "B" second,
"C" third, etc.
12
DIMM SLOTS (6 per CPU node)
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D
1
D
Chnl 1
2
A
2
A
Chnl 2
3
E
3
E
Chnl 2
4
B
4
B
Chnl 3
5
F
5
F
Chnl 3
6
C
6
C
Standard Memory (1 CPU model)
Hot Plug SAS/SATA performance and base models include 2 x 2 GB UDIMM and
1 x 2 GB UDIMM respectively
Non-Hot Plug SATA entry models include 1 x 2 GB UDIMM
4 GB (2 x 2GB) of PC3-10600 (DDR3-1066) Advanced ECC UDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: empty
1
D: empty
Chnl 1
2
A: 2GB DIMM
2
A: empty
Chnl 2
3
E: empty
3
E: empty
Chnl 2
4
B: 2GB DIMM
4
B: empty
Chnl 3
5
F: empty
5
F: empty
Chnl 3
6
C: empty
6
C: empty
Standard memory plus Optional Memory (1 CPU model)
18GB, consisting of three (3) 2GB RDIMMs plus three (3) 4GB RDIMMs)
3x 2GB dual-rank PC3-10600 RDIMMs
3x 4GB dual-rank PC3-10600 RDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: 2GB DIMM
1
D: empty
Chnl 1
2
A: 4GB DIMM
2
A: empty
Chnl 2
3
E: 2GB DIMM
3
E: empty
Chnl 2
4
B: 4GB DIMM
4
B: empty
Chnl 3
5
F: 2GB DIMM
5
F: empty
Chnl 3
6
C: 4GB DIMM
6
C: empty
Standard memory Replaced with Optional Memory (1 CPU model)
RDIMM maximum configuration
24GB, consisting of six (6) 4GB dual-rank PC3-10600 RDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: 4GB DIMM
1
D: empty
Chnl 1
2
A: 4GB DIMM
2
A: empty
Chnl 2
3
E: 4GB DIMM
3
E: empty
Chnl 2
4
B: 4GB DIMM
4
B: empty
Chnl 3
5
I: 4GB DIMM
5
I: empty
Chnl 3
6
C: 4GB DIMM
6
C: empty
UDIMM Maximum Configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: 4GB DIMM
1
D: empty
Chnl 1
2
A: 4GB DIMM
2
A: empty
Chnl 2
3
E: 4GB DIMM
3
E: empty
Chnl 2
4
B: 4GB DIMM
4
B: empty
Chnl 3
5
F: 4GB DIMM
5
F: empty
Chnl 3
6
C: 4GB DIMM
6
C: empty
Standard memory Replaced with Optional Memory (2 CPU model)
RDIMM maximum configuration
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 RDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: 4GB DIMM
1
D: 4GB DIMM
Chnl 1
2
A: 4GB DIMM
2
A: 4GB DIMM
Chnl 2
3
E: 4GB DIMM
3
E: 4GB DIMM
Chnl 2
4
B: 4GB DIMM
4
B: 4GB DIMM
Chnl 3
5
F: 4GB DIMM
5
F: 4GB DIMM
Chnl 3
6
C: 4GB DIMM
6
C: 4GB DIMM
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
D: 4GB DIMM
1
D: 4GB DIMM
Chnl 1
2
A: 4GB DIMM
2
A: 4GB DIMM
Chnl 2
3
E: 4GB DIMM
3
E: 4GB DIMM
Chnl 2
4
B: 4GB DIMM
4
B: 4GB DIMM
Chnl 3
5
F: 4GB DIMM
5
F: 4GB DIMM
Chnl 3
6
C: 4GB DIMM
6
C: 4GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant energy efficient features, see: www.hp.com/go/proliant-energy-efficient
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will
be negotiated down to an acceptable level for all components. NOTE: Supports up to eight (8) SAS/SATA hard drives via 2nd Hot plug
Hard Disk Drive cage and HP Smart Array P410 Controller. NOTE: The 2nd hot-plug hard drive cage requires the purchase of one
750W hot plug power supply, Redundant Power Supply Enablement Kit and HP
Smart Array P410 Controller (if not already part of the configuration). NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug LFF
(3.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
NOTE:
To support 8 drives, the purchase of the optional 2nd hot plug drive cage,
750W Redundant Power Supply, Redundant Power Supply Enablement Kit and HP
Smart Array P410 Controller (if not already part of the configuration) are
required.
Maximum Storage Capacity - SAS Models
Internal
16.0TB (8 x 2TB SAS hard drives)
Total
16.0TB (8 x 2TB SAS hard drives)
Maximum Storage Capacity - SATA Models
Internal
16.0TB (8 x 2TB SATA drives)
Total
16.0TB (8 x 2TB SATA drives)
Tape and Disk-Based
Backup
NOTE: For the complete range of StorageWorks
tape drives, autoloaders, libraries and media, including the internal
fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Recommended Controller
Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
Internal or External
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity
matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
HP StorageWorks USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750
Internal or External
USB 2.0 port
N/A
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc
460W (750W)
at 100 VAC for system 460W (750W) at 200 VAC
Maximum
Peak Power
460W (750W) at 100
VAC 460W (750W) at 200 VAC
System
Inlet Temperature
Operating
50°
to 95° F (10° to 35° C) at sea level with an altitude derating of
1.8°F per 1,000 ft (1.0° C per every 305 m) above seal level to a maximum
of 10,000 ft (3050 m) no direct sustained sunlight . Maximum rate of change is
18°F/hr (10°C/hr). The upper limit may be limited by the type and number
of options installed. System performance may be reduced if operating with a fan
fault or above 86°F (30°C).
Non-Operating
-40°
to 140° F (-30° to 60° C)
Relative
Humidity (non-condensing)
Operating
10%
to 90% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb temperature,
non-condensing.
Non-operating**
10%
to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
10,000
ft (3000m). Maximum allowable altitude change rate is 1°C per 300m.
Non-Operating
30,000
ft (9144m). Maximum allowable altitude change rate is 1°C per 300m.
Acoustic Noise
Listed
are the declared A-Weighted sound power levels (LWad) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 9ECMA 109).
Idle (Fixed Disk Drives
Spinning)
L WAd (BELS)
460W
non-redundant: 5.4 B 460W redundant: 5.5 B 750W non-redundant: 5.6 B
750W redundant: 5.5 B
CISPR
22; EN55022; EN55024; 47 CFR, FCC Rules and Regulations Part 15 Subpart B;VCCI
Class B ITE; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3.
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible
to bear the appropriate compliance logos and statements.
HP Half-Height SATA DVD-ROM Optical Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
Capacity
4.7 GB (DVD-5)
8.54 GB (DVD-9)
Block Size
DVD Media
2,048 bytes
Interface
SATA
1.56Gb/s
Access Times
(typical)
Random
<140 ms
Full-Stroke
<250 ms
Data Transfer Rate
Sustained
8100 to 21600 KB/s (6X to 16X)
Cache Buffer
128 KB
Start-up Time (typical)
< 7 seconds
Stop Time
< 4 seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 113° F (5°
to 45° C)
Humidity
10% to 90%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (4.49 x 15.0
x 20.3 cm)
Weight
2.64 lb (1.2 kg)
Smart Array P410 Controller
Dimensions (not including
bracket)
Low Profile PCIe Form Factor
19.05 cm x 24.13 cm x 5.72cm (7.5 in x 9.5 in x 2.25 in)
Disk Drive and Enclosure Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial ATA)
SAS Connectors
x8 3G SAS provides 2.4GB/s maximum
bandwidth
Cache Memory Speed
DDR2-533MHz with 40 or 72-bit
wide bus provides up to 4.2 GB/s maximum bandwidth.
Server Interface
x8 2.5G PCIe 2.0 provides 2GB/s
maximum bandwidth
SAS Speed
x8 3G SAS provides 2.4GB/s maximum
bandwidth
Logical Drives Supported
Up to 32 logical drives
Host Memory Addressing
64-bit, supporting greater than
4GB server memory space
RAID Support
RAID 6, 6+0 (Advanced Data Guarding) NOTE: The minimum of 256 MB cache,
battery kit, and Smart Array Advanced Pack License Key upgrade is required
to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data Guarding) NOTE: The 256MB upgrade is required
to enable RAID 5 support on the Smart Array P410i. RAID 5+0 is available
with the addition of the optional Battery kit upgrade
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Embedded HP NC107i
PCI Express Gigabit Server Adapter (Embedded)
Network Interface
Integrated 10/100/1000BASE-T
Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller
(MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method
Compliant to x1 PCIe
Specification
Controller
BCM5723
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45 connector
Cable Support
Performs all the physical
layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet on standard
Category 5 UTP
HP Smart Array B110i SATA
RAID Controller (RAID 0,1,10)
Dimensions
N/A (embedded) ships standard
Disk Drive and Enclosure Protocol
Support
3.0 Gbps SATA
Architecture
64-bit
SAS Connectors
4 internal x1 SATA connectors
Software Upgradeable Firmware
Yes
Maximum Capacity
2TB
Memory Addressing
6GB (maximum)
Logical Drives Supported
2 (maximum)
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 10
Environment-friendly Products
and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
512327-B21
© 2013 USA PartsDirect