NOTE: Up to 2
processors supported. Performance Model configurations include two processors. NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading
Technology NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 6,5,4,3,2 and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number
indicated the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
HP 4GB (1x4GB) Single Rank x4
PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600
(DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient. NOTE: PC3L is a low voltage memory.
HP Drive Cage Options
HP DL360G6 SFF HD Backplane Kit
NOTE: For 4 addition HD Bays, slots
5-8. This option will work on both DL360 G6 and G7 servers. NOTE: Optical/DVD cannot be used with this option.
516966-B21
HP Optical Drives
HP DL360 SL 12.7mm SATA DVD
532066-B21
HP DL360 SL 12.7mm SATA DVD-RW
Optical kit NOTE: Integrated DVD/Optical drive
option is supported on 4 Hard drive models only.
532068-B21
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives
HP 600GB 6G SAS 10K
rpm SFF (2.5-inch) Dual Port Enterprise Hard Drive
RECOMMENDATION:
For best performance of SSD drives it is recommended that any Smart Array
Controller use a max of 4 drives. For this product a second Smart Array
option can be used for the second set of 4 SSD drives. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: http://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.html
10 Gigabit Ethernet Adapters NOTE: No more than two 10GbE I/O
devices are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required
per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
PCI-X Riser option NOTE: To convert full-length, full-height
PCI-Express slot to PCI-X slot for PCI-X cards only.
518824-B21
HP Power Supplies
NOTE: Prior to
making a power supply selection it is highly recommended that the HP Power
Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP 460W Common Slot Gold Hot Plug
Power Supply Kit NOTE: Standard on most models.
NOTE: Option Kits
contain optional power supply, an IEC power cable and PDU IEC cables.
HP Storage Controllers
NOTE: The DL360
G7 Server comes standard with an integrated P410i Smart Array Controller
designed to mange up to 8 SFF hard drives from HP. For additional capabilities
and capacities HP offers additional Smart Arrays. (BBWC=Battery Backed Write
Cache and FBWC=Flash Back Write Cache)
SAS Controllers
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports
Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array P812/1G FBWC 2-ports
Int/4-ports Ext PCIe x8 SAS Controller NOTE: The HP Smart Array P812/1G
Flash Backed Cache Controller has the ability to support 8 internal drives
on the DL360 G7 as well as external storage solutions. For use with the
internal 8 drives the Mini-SAS to Mini-SAS, 25.50" & 28.00"
option kit (PN: 496013-B21) is required.
HP 650 mAh P-Series Battery NOTE: To enable BBWC on the 256MB
cache kits.
462969-B21
HP Mini SAS to Mini SAS 28in Cable
Assembly
496013-B21
HP Chipset SATA Cable Kit NOTE: This cable allows for connection
of Chipset SATA to 1 SATA HD in the drive cage. This solution allows for
disabling the embedded storage controller. Qty of 1 HD blanks may need to
be ordered/installed when using this solution (503771-B21) to ensure all
bays are populated with HDs or blanks. There is no support for optical media.
There is no support for HD LED or thermal management when this solution
is deployed. Only supported on non Hot Plug SFF Hard Drives configurations.
Hot Plug is not supported. Loss of HD support for all drives bays except
for the 1 deployed in this configuration. VMWare (ESX3.5/i ) is not supported
in this configuration.
HP Modular Smart Array SC08e 2-ports
Ext PCIe x8 SAS Host Bus Adapter NOTE: This is a 2 x4 External Port
HBA NOTE: This is only approved for the HP Storage Works P2000 G3 SAS
Modular Smart Array.
The HP ProLiant DL360 G7 combines
performance, intelligent power and cooling management with IT management
tools and essential fault tolerance, all optimized for space constrained
installations. A 1U server with the improved performance of the latest Intel
5600 series processors, Unique HP Thermal Logic Technologies that provide
leadership in energy efficiencies and ProLiant iLO 3 remote management.
HP continues to provide more performance, flexibility and efficiency for
space constrained environments.
Eighteen DIMM slots:
DDR3 Registered (RDIMM) or Unbuffered (UDIMM) memory
6.
Serial connector
7.
Video connector
7.
Redundant Hot Plug Power Supplies
(upgradeable option)
8.
NIC 4 connector
8.
2 PCI-E Slots
9.
NIC 3 connector
10.
NIC 2 connector
11.
NIC 1 connector
12.
USB connector
13.
USB connector
What's New
Introducing a new refresh of two Intel XEON 5600 Series processors
with increases in frequency and performance. Now with 6-Core processors
up to 3.46GHz and 4-Core up to 3.60GHz.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
NOTE: Up to
2 processors supported. Performance Model configurations include two processors. NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading
Technology NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 6,5,4,3,2 and 1(6 cores) or
4,3,2 and 1(4 cores) cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5600 and 5500 Series, the letter preceding the
model number indicated the performance/wattage of the processor. "X"
denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
Cache Memory One of the following depending on Model
12MB (1 x 12MB) Level 3 cache
NOTE: All processor models except
for those identified below.
4MB (1 x 4MB) Level 3 cache
NOTE: For processors E5506/E5503.
Online Spare mode (available
with Intel Xeon 5600 Series processors)
Mirroring mode
Lock-step mode
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered
(UDIMM)
DIMM Slots Available
18 (3 DIMM slots per Channel/3
channels per processor)
Standard (Performance Models)
12GB (6 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard (Base Models)
6GB (3 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard (Entry Model)
4GB (2 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard (Efficiency Model)
4GB (2 x 2GB) PC3-10600E (DDR3-1333)
Unbuffered DIMMs
Maximum Capacity (RDIMM)
384GB (12 slots x 32GB @800MHz)
Maximum Performance Capacity
(RDIMM)
192GB (6 slots x 32GB @1066MHz)
Maximum Capacity (UDIMM)
48GB (12 slots x 4GB @ 1333MHz)
NOTE:
If only one processor is installed, only half the DIMM slots are available. NOTE: When populating with two processors the 16GB or 32GB Memory
Kits (Quad-Rank), only 12 DIMMs can be populated. NOTE: Depending on the memory configuration and processor model,
the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the
Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
Network Controller
Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total) with TCP/IP Offload Engine, including
support for Accelerated iSCSI
Expansion Slots
Expansion Slots #
Technology
Bus
Width*
Connector Width
Form Factor
Notes
1
PCI-e
x8
x8
Low profile slot
2
PCI-e
x16
x16
Full-length, full-height
slot
2
PCI-X**
(133 MHz, 3.3 Voltage)
64-bit
Full-length, full-height slot
*Indicates
the number of physical electrical lanes running to the connector.
** Indicates Option kit designed for PCI-X cards only. NOTE: For external power requirements for PCI options a PCI Thermal-Power
Kit is offered optionally for higher power requirements. NOTE: Two PCI-Express Gen 2 expansion slots: (1) full-length, full-height
slot and (1) low-profile slot. Optional PCI-X Riser expansion slot for PCI-X
cards only.
Storage Controller One of the following depending on Model
Entry Models
HP Smart Array P410i/Zero Memory
Controller (RAID 0/1/1+0)
Base Models
HP Smart Array P410i/256 MB
Controller (RAID 0/1/1+0/5/5+0)
Performance Models
HP Smart Array P410i/1G FBWC
Controller (RAID 0/1/1+0/5/5+0)
Efficiency Models
HP Smart Array P410i/Zero Memory
Controller (RAID 0/1/1+0)
Available Smart
Array upgrades: 256MB, Battery kit upgrade (to add BBWC to the 256MB Memory
option), 512MB BBWC, 512MB FBWC or 1G FBWC and Smart Array Advanced Pack
(SAAP)
Internal Storage
Devices
Diskette Drive
None
Optical Drive One of the following depending on Model
Optional: DVD-ROM, DVD-RW NOTE: This option available on 4
drive bay models only.
Optional HP External USB CD/DVD
R/RW for 8 drive models
Hard Drives
None Standard
Drive Bays
4 SFF Bays standard with option
for up to 8 SFF drive bays total.
NOTE: 4 bays
standard in Entry, Base and CTO models, with optional upgrade to 8 bays
with the SFF HD Backplane Kit (516966-B21). No CD or DVD options available
when server is configured with 8 drive bays. NOTE: This option available for 8 drive models. HP External USB CD/DVD
R/RW Drive available for 8 drive systems (must be ordered separately).
NOTE:
PS/2 ports have been removed for NIC expansion.
Industry Standard
Compliance
ACPI 2.0b Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 1.1 and 2.0 Compliant
SMBIOS 2.6.1
Server Power Cords
All Pre-configured Models servers
ship with a high voltage server to PDU power cord. NOTE: ProLiant DL servers do not
ship standard with NEMA power cords that allow connection to 110V US wall
outlets in a home or office. ProLiant DL servers are primarily connected
to PDU's in data center racks so they ship standard with only a PDU power
cord (416151-B21). If a user wishes to power a ProLiant DL server using
a standard wall receptacle (NEMA-15), the NEMA power cord must be ordered
separately and the server will be shipped with both cords. If the order
is a Factory-Integration order only the NEMA-15 power will be shipped. See
Power Cords in the Additional Options section below.
Common Slot Power Supplies
HP's Common Slot (CS) Power Supply bay design provides the customer
with commonality in power supplies across multiple platforms, saving on
the cost of spares and allows HP to offer multiple power solutions to
fit the customers' needs. Many HP ProLiant Servers come with high-efficiency
CS Power Supplies. HP's new CS power supplies are designed to provide
power efficiency without degrading performance of the ProLiant. Power
Supplies will have efficiency ratings up to 94%. There are multiple CS
power output options available allowing you to "right-size"
the most appropriate power supply option for your server configuration.
Check the Power Supplies section for power sizes supported. To make sure
you select the correct power supply to meet your configuration, we suggest
that you use the HP Power Advisor to "right-size" a power supply
option for your configuration. All HP Common Slot power sources are UL,
CE Mark Compliant, Hot Plug and support redundant configurations. The
HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
NOTE: All HP Common Slot Power
Supplies are not supported by all ProLiant Servers. Please check your
server QuickSpecs to confirm support by that server.
HP's CS power supplies support multiple energy efficiency initiatives
including Climate Savers Computing Initiative (CSCI) and ECOS Consulting/80PLUS
ratings for Silver, Gold, and Platinum power efficiency. Additionally,
server models that meet efficiency requirements for Energy Star compliance
will be published once testing has been completed.
HP's -48VDC power supply is designed for those environments that require
DC Voltage to operate. This power supply supplies up to 1200Watts of power
on 48 Volts DC and comes with a DC power cable.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be
purchased through power supply option kits (see Redundant Options for
part numbers).
System Fans
3 fan modules ship standard
in 1 processor models
4 fan modules ship standard in 2 processor models
Fan redundancy standard with all modules NOTE: The processor option kit contains
1 additional fan module, when upgrading from a 1 processor to two processor
models. A Fan Module Option kit can also be purchased separately for use
with PCI Graphics card upgrades. See HP PCI Thermal Power Kit (519254-B21)
in the Core Options section.
NOTE: For more
information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available
for your server including how to purchase from HP, please visit our OS Support
Site at: http://www.hp.com/go/ossupport
and our driver download page www.hp.com/support/DL360G7.
Graphics
Integrated ATI ES1000, 32MB video standard
16 bit color: maximum resolution of 1600 x 1200
32 bit color: maximum resolution of 1280 x 1024
NOTE: Maximum resolution available via
iLO 3 remote console for ProLiant is 1280 x 1024 (for 32 bit color) and
1600 x 1200 (DVR max resolution).
Form Factor
1U Rack form factor (1.75"),
less than 28 inches (70.5 cm) deep
HP Insight management software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
NOTE: In an effort to support reducing
our environmental impact, the HP Insight Foundation Suite for ProLiant
media will be available as a selectable option for this server at time
of order of a CTO SKU. This will allow customers to order the number of
media kits that best meet their needs and eliminate receiving unnecessary
duplicate media.
HP Integrated Lights-Out 3 (iLO 3)
HP Integrated Lights-Out 3 (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works hand-in-hand
with HP Systems Insight Manager, Insight Control suites, and Insight Dynamics
for ProLiant, helping customers unleash the value of the ProLiant platform
and deliver the highest possible quality of IT service. For more information,
visit: www.hp.com/go/iLO
Security
Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
iLO 3 (Integrated Lights-Out 3) has 12 customizable user accounts and SSL
encryption
iLO 3 can be disabled via a Global Setting
iLO Advanced supports directory services integration
Warranty
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners
resellers. Hardware diagnostic support and repair is available for three
years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes
3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response. Warranty repairs may be accomplished through the use of Customer
Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge
will result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited
warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Insight Control, a product
option, delivers essential infrastructure management that can help save
time and money by making it easy to deploy, migrate, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP Insight
Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant
HP Insight Dynamics for ProLiant,
a product option, is advanced infrastructure management software that enables
IT staff to instantly adjust their environments to meet dynamic business
demands by provisioning, optimizing and protecting complex infrastructure
in minutes. It's a powerful toolkit, integrated-by-design, that accelerates
complex technology projects and simplifies daily operations, transforming
data center economics. With Insight Dynamics IT professionals can plan capacity
and power continuously, balance workloads across physical and virtual resources,
and ensure cost-effective high availability. It also enables IT organizations
to provision infrastructure consistently and automatically from pools of
shared resources using a self-service portal. Resources provisioned can
range from a single virtual machine to complex multi-tier environments and
their associated physical and virtual resource requirements. In addition
to the previous functional benefits, it also provides a cost-effective disaster
recovery for physical and virtual environments that works with HP StorageWorks
Continuous Access software for both the Enterprise Virtual Array and the
XP storage array allowing application environments to be reactivated in
minutes with the touch of a button to a remote location.
HP Cluster Platforms are specifically
engineered, factory-integrated large-scale ProLiant clusters optimized for
High Performance Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red Hat
Enterprise Linux and Novell SLES, as well as Microsoft Windows HPC Server.
A Cluster Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC)
interconnect technologies are available for this server as part of the HP
Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects
are fully supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management Utility
HP Cluster Management Utility
(CMU) is an HP-licensed and HP-supported suite of tools that are used to
manage large-scale Linux ProLiant systems. CMU includes software for the
centralized provisioning, management and monitoring of nodes. CMU makes
the administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack
HP HPC Linux Value Pack (Value
Pack) is an HP-licensed and HP-supported specially priced software bundle
for the development and deployment of applications on HPC Cluster Platforms.
Value Pack includes the Platform HPC Enterprise Edition suite of tools including
the LSF workload scheduler, the HP-MPI parallelization library. Also included
are the HP Unified Parallel C compiler and the HP Shmem library, as well
as the execution environments for the libraries and compiler. HP
HPC Linux Value Pack
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure-Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance. http://www.hp.com/products/configurator
NOTE: For the Standard Features shipped
in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below.
Options can be selected from the Core or Additional options section of
this QuickSpecs. NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs.
Performance Models
Six-Core Model
HP ProLiant DL360 G7 X5675 2P 12GB-R P410i/1GB FBWC 8 SFF SAS/SATA 460W
PS Svr
636365-001
HP ProLiant DL360 G7 X5650 2P 12GB-R P410i/1GB FBWC 8 SFF 460W 92 EFF
RPS IC Svr
579239-001
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on configurable product offerings
and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE: FIO indicates that this option is only available as a factory
installable option.
Step
1: Base Configuration (choose one of the following configurable models)
HP
Models
HP ProLiant DL360
G7 Configure-to-order Server
579237-B21
HP ProLiant DL360
G7 Performance Configure-to-order Server NOTE: This Model available with Dual
X5690 or X5687 130Watt processors only.
641749-B21
Factory Integrated
Model ships with:
Two HP NC382i Dual Port Multifunction Gigabit Server Adapter (4x1Gb Ports)
HP Smart Array P410i/Zero Memory Controller
HP Integrated Lights-Out 3 (iLO 3) embedded
2 PCIe 2.0 Slots - 1 full-length, full-height x16 and 1 low-profile x8.
4 bays for Hot-Plug SAS/SATA Drives(Factory Option for up to 8)
4 USB ports(1-front,1-internal, 2-rear)
1 Internal Secure Digital(SD) slot
3 fan modules; fan redundancy standard
1U Rack form factor (1.75"), less than 28 inches (70.5 cm) deep
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP
Processors
Six-Core Processors
HP DL360 G7 Intel®
Xeon® X5690 (3.46GHz/6-core/12MB/130W) FIO 2-processor Kit NOTE: This option requires P/N:
641749-B21 selected in Step 1 above.
644131-B21
HP DL360 G7 Intel®
Xeon® X5675 (3.06GHz/6-core/12MB/95W) FIO Processor Kit
NOTE:
Up to 2 processors supported. Performance Model configurations include two
processors. NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading
Technology NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 4,3,2 and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number
indicated the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
HP 4GB (1x4GB) Single
Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
HP 8GB (1x8GB) Dual
Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
NOTE:
All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator. NOTE: For more information on ProLiant Energy Efficient Features,
see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory.
HP
Power Supplies
NOTE:
Most DL360 Series Servers operate within the 460Watt range of the base model
Common Slot Power Supply. However, prior to making a power supply selection
it is highly recommended that the HP Power Advisor is run to determine the
right size power supply for your server configuration. The HP Power Advisor
is located at: www.hp.com/go/hppoweradvisor.
Standard Power Supplies only come with "PreConfigured Models"
shown previously and are defined in those lists of options.
HP 460W Common Slot
Gold Hot Plug Power Supply Kit NOTE: Standard on most models.
NOTE:
For additional Cache Memory Options for the standard integrated Smart Array
(P410i) see HP Storage Controllers section in Step 4: below. NOTE: For additional Storage Controller Options select from these
options. See Additional Options in next section below for more details.
HP Smart Array P212/256
1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller
The HP ProLiant DL360
G7 performance packs are necessary to configure a HP ProLiant DL360 G7 Performance
Model. HP ProLiant DL360 G7 Performance model includes the latest performance
technologies and enterprise class availability features pre-installed for
convenience and value. The performance pack includes a 2nd X5650 or X5675
processor, redundant 460w power supplies, 1G of FBWC, a second HDD backplane
for full 8 SFF/SSD hard drive support and Insight Control license.
HP DL360G7 X5650
HPM FIO Perf Pack
593829-B21
HP DL360G7 X5675
HPM FIO Perf Pack
636366-B21
HP
Insight Software
HP Insight Control
including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License
582765-B21
HP Insight Control
for Linux including 1yr 24x7 Support ML/DL Bundle 1 Server FIO License
TC203A
Step 4: Choose
Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and
"Additional Options" sections below.
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP Unique Options
HP DL360G7 SFF HD Backplane Kit NOTE: Integrated Optical/DVD cannot
be used with this option. Optional External USB CD/DVD Drive available.
516966-B21
HP DL360 SL 12.7mm SATA DVD
532066-B21
HP DL360 SL 12.7mm SATA DVD-RW
Optical kit NOTE: Integrated DVD/Optical drive
option is supported on 4 Hard drive models only.
532068-B21
PCI-X Riser option NOTE: For PCI-X Card support only.
NOTE: The PCI-X Riser option is available to convert the full-length,
full-height PCI-Express slot to PCI-X slot for PCI-X cards only.
518824-B21
HP Processor
Six-Core Processors
HP DL360 G7 Intel® Xeon®
X5675 (3.06GHz/6-core/12MB/95W) Processor Kit
NOTE: Up to 2
processors supported. Performance Model configurations include two processors. NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading
Technology NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 6,5,4,3,2 and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number
indicated the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
HP 4GB (1x4GB) Single Rank x4
PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600
(DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient. NOTE: PC3L is a low voltage memory.
HP Drive Cage Options
HP DL360G6 SFF HD Backplane Kit
NOTE: For 4 addition HD Bays, slots
5-8. This option will work on both DL360 G6 and G7 servers. NOTE: Optical/DVD cannot be used with this option.
516966-B21
HP Optical Drives
HP DL360 SL 12.7mm SATA DVD
532066-B21
HP DL360 SL 12.7mm SATA DVD-RW
Optical kit NOTE: Integrated DVD/Optical drive
option is supported on 4 Hard drive models only.
532068-B21
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives
HP 600GB 6G SAS 10K
rpm SFF (2.5-inch) Dual Port Enterprise Hard Drive
RECOMMENDATION:
For best performance of SSD drives it is recommended that any Smart Array
Controller use a max of 4 drives. For this product a second Smart Array
option can be used for the second set of 4 SSD drives. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: http://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.html
10 Gigabit Ethernet Adapters NOTE: No more than two 10GbE I/O
devices are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required
per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
PCI-X Riser option NOTE: To convert full-length, full-height
PCI-Express slot to PCI-X slot for PCI-X cards only.
518824-B21
HP Power Supplies
NOTE: Prior to
making a power supply selection it is highly recommended that the HP Power
Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP 460W Common Slot Gold Hot Plug
Power Supply Kit NOTE: Standard on most models.
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP
Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical
Support and Updates Electronic License
T9074BAE
HP Insight Control Smart Buy including 1yr
24x7 Technical Support and Updates Electronic License
T9074ASE
HP Insight Control including 1yr 24x7 Support
ProLiant ML/DL/BL-bundle Electronic License
TC278AAE
HP Insight Control including 1yr 24x7 Technical
Support and Updates Single Server License
452148-B22
HP Insight Control Smart Buy including 1yr
24x7 Technical Support and Updates Single Server License
452148-S22
HP Insight Control including 1yr 24x7 Support
ProLiant ML/DL/BL-bundle Tracking License
TC275A
HP Insight Software Media Kit NOTE: Insight Software DVD media
without licenses. Contains HP Systems Insight Manager, HP Insight Control,
HP Insight Dynamics, HP Insight Control for Microsoft System Center, and
Virtual Connect Enterprise Manager software. Uses an integrated installer
to perform quick and accurate software installation and updates.
436222-B21
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr
24x7 Support Electronic License
TC213AAE
HP Insight Control Smart Buy for Linux including
1yr 24x7 Support Electronic License
TC213ASE
HP Insight Control for Linux including 1yr
24x7 Support Single Server License
TC209A
HP Insight Control for Linux Media Kit NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
TC208A
NOTE: Licenses ship without
media. The Media Kit for Insight Control for Linux can be ordered separately,
or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out (iLO) Advanced
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Electronic License
TA850AAE
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Single Server License
NOTE: This license allows
1 server to be deployed and managed via HP iLO Advanced. Customer will receive
a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
HP Insight Control Server Deployment
HP Insight Control Server Deployment including
1yr 24x7 Support Electronic License
T9082AAE
HP Insight Control Server Deployment including
1yr 24x7 Support Single Server License
452151-B21
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
High
Performance Clusters
HP Cluster Management Utility
HP Cluster Management Utility Compute Node
Flexible License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one node (server). Customer will receive a printed
end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
QL803A
HP Cluster Management Utility License and
Media NOTE: Order a minimum of one license
per cluster to purchase media including software and documentation, which
will be delivered to the customer, and also licenses CMU management. No
license key is delivered or required.
HP High Performance Computing Linux Value
Pack 1 Processor Flexible License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one socket (a.k.a. processor). Customer will receive
a printed end user license agreement and license entitlement certificate
via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
TC293B
HP High Performance Computing Linux Value
Pack Media Kit NOTE: This part number can be used
to purchase media including software and documentation, which will be delivered
to the customer.
NOTE: The TPM
(Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities
of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker
to help protect user data and to ensure that a server running Windows Server
2008 has not been tampered with while the system was offline. For more information
about TPM, including a white paper, go to: www.hp.com/go/TPM. NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers
NOTE: The DL360
G7 Server comes standard with an integrated P410i Smart Array Controller
designed to mange up to 8 SFF hard drives from HP. For additional capabilities
and capacities HP offers additional Smart Arrays. (BBWC=Battery Backed Write
Cache and FBWC=Flash Back Write Cache)
SAS Controllers
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports
Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array P812/1G FBWC 2-ports
Int/4-ports Ext PCIe x8 SAS Controller NOTE: The HP Smart Array P812/1G
Flash Backed Cache Controller has the ability to support 8 internal drives
on the DL360 G7 as well as external storage solutions. For use with the
internal 8 drives the Mini-SAS to Mini-SAS, 25.50" & 28.00"
option kit (PN: 496013-B21) is required.
HP 650 mAh P-Series Battery NOTE: To enable BBWC on the 256MB
cache kits.
462969-B21
HP Mini SAS to Mini SAS 28in Cable
Assembly
496013-B21
HP Chipset SATA Cable Kit NOTE: This cable allows for connection
of Chipset SATA to 1 SATA HD in the drive cage. This solution allows for
disabling the embedded storage controller. Qty of 1 HD blanks may need to
be ordered/installed when using this solution (503771-B21) to ensure all
bays are populated with HDs or blanks. There is no support for optical media.
There is no support for HD LED or thermal management when this solution
is deployed. Only supported on non Hot Plug SFF Hard Drives configurations.
Hot Plug is not supported. Loss of HD support for all drives bays except
for the 1 deployed in this configuration. VMWare (ESX3.5/i ) is not supported
in this configuration.
HP Modular Smart Array SC08e 2-ports
Ext PCIe x8 SAS Host Bus Adapter NOTE: This is a 2 x4 External Port
HBA NOTE: This is only approved for the HP Storage Works P2000 G3 SAS
Modular Smart Array.
NOTE: The HP ProLiant
DL360 G7 ships with an IEC-IEC power cord used for rack mounting with Power
Distribution Units (PDUs). For specific power cords purchase from the following.
Nema 5-15P to IEC320-C13
AF556A
HP RDNT 2m,10A, C13-C14 JMPR CORD
AF573A
HP Backup & Recovery
Software
HP Data Protector Express
HP Data Protector Express 5.0
for 1 Server
TC330AAE
HP Data Protector Express 5.0
for 3 Servers
TC331AAE
HP Data Protector Express 5.0
for 10 Servers
TC332AAE
HP Data Protector Express 5.0
for 1 Server Upgrade from HP Data Protector Express Basic
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup
products see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB in
1U Rack-mount Kit
AP835B
HP StorageWorks DAT 320 SAS Internal
Tape Drive NOTE: For installation into 1U SAS
rack kit (AE459B) or 3U SAS rack kit (AG576B). No peripheral bay available
for installation into the server. Connection using HP Smart Array P212/Zero
Memory Controller ( 462828-B21) recommended.
AJ830A
HP StorageWorks Ultrium 920 SAS
Internal Tape Drive NOTE: For installation into 1U SAS
rack kit (AE459B) or 3U SAS rack kit (AG576B). No peripheral bay available
for installation into the server. Connection using HP Smart Array P212/Zero
Memory Controller ( 462828-B21) recommended.
EH847A
HP StorageWorks LTO-4 Ultrium
1760 SAS (1) in 1U Rack-mount Kit NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EH946B
HP StorageWorks LTO-5 Ultrium
3000 SAS Tape Drive in 1U Rackmount NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EJ014A
HP StorageWorks 1/8 G2 LTO-5 Ultrium
3000 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack Kit (AH166A) for rack installation. Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
BL536A
HP StorageWorks MSL2024 1 LTO-5
Ultrium 3000 SAS Tape Library NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
BL537A
HP StorageWorks MSL4048 2 LTO-5
Ultrium 3000 SAS Tape Library NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
HP StorageWorks D2D4004i Backup
System NOTE: 3.0TB (expandable to 7.5TB)
of useable network disk backup capacity. Network connected appliance with
connectivity using the iSCSI protocol. If the server requires a hardware
iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
EH938A
HP StorageWorks D2D4112 Backup
System NOTE: 9.0TB (expandable to 18.0TB)
of useable network disk backup capacity. Fibre Channel SAN connected appliance.
Direct server attach is not supported, requires connection via SAN fabric.
See http://www.hp.com/go/connect
for supported Fibre Channel Host Bus Adapters.
EH993B
HP StorageWorks RDX Removable
Disk Backup Systems USB
HP StorageWorks RDX320 Internal
Removable Disk Backup System NOTE: For installation into 1U USB
Rack-Mount Kit ( A8007A). No peripheral bay available for drive installation
into the server. 320GB of disk capacity per data cartridge.
AJ767A
HP StorageWorks RDX500 Internal
Removable Disk Backup System NOTE: For installation into 1U USB
Rack-Mount Kit ( A8007A). No peripheral bay available for drive installation
into the server. 500GB of disk capacity per data cartridge.
AJ934A
HP StorageWorks RDX 1TB Internal
Removable Disk Backup System NOTE: For installation into 1U USB
Rack-Mount Kit ( A8007A). No peripheral bay available for drive installation
into the server. 1 TB of disk capacity per data cartridge.
NOTE: For additional
information on HP Uninterruptible Power Systems please go to: www.hp.com/servers/rackups. NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
NOTE: Please see
the UPS and PDU cable matrix's on the HP Power Protection and Management
page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for
UPS and PDU units. Please see the following link: www.hp.com/products/powercords.
HP Power Distribution Units
Monitored PDUs
HP Monitored Power Distribution
Unit: Full Rack Version
HP 8.6 kVA S1324 Monitored PDU-
single input, 3Ø, 24A
AF504A
HP 8.3 S1140 Monitored PDU- single
input, 1Ø, 40A
AF506A
HP Monitored Power Distribution
Unit: Half Rack Version
HP 4.9 kVA S124 Monitored PDU-
single input, 1Ø, 24A
8.3kVA Model - mPDU, 40A, High
(power cord attached)
252663-D73
NOTE: For additional
information on HP Power Distribution Units including accessories please
go to: www.hp.com/go/pdu.
NOTE: Please see
the UPS and PDU cable matrix's on the HP Power Protection and Management
page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for
UPS and PDU units. Please see the following link: www.hp.com/products/powercords.
HP Rack Series
HP Rack 10000 G2 Series
(Carbon/Graphite Metallic)
NOTE: For additional
information regarding Rack Cabinets and Telco Rack support, please see the
following URL: http://www.hp.com/go/rackandpower.
NOTE: The increasing
power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced
airflow for maximum cooling, allowing these racks to be fully loaded with
servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and
rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to
the required 64 percent open area for ventilation). Side: The clearance
between the installed rack component and the side panels of the rack must
be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front
panel U-spaces in the rack. This arrangement ensures proper airflow. Using
a rack without blanking panels results in improper cooling that can lead
to thermal damage.
NOTE: Quick deploy
rail system provides tool-free support for racks with square or round mounting
holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an
adjustment range of 24" - 36". The ambidextrous cable management arm can
be mounted on either the left or right side for improved cable management.
HP 4GB Secure Digital Flash
Media Kit NOTE: Blank SD media device is supported
for use with VMware and Citrix. SD media must be installed in the internal
slot of the ProLiant server. Learn more at: http://www.hp.com/go/proliantvirtualization.
580387-B21
HP
Care Pack Services
Hardware Services 4-Hour On-site
Service
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4496E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
U4497E
Hardware Services 6-Hour Call
to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
U4498E
Hardware Services 24-Hour Call
to Repair On-site Service
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UP711E
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 4 Years, Electronic
UP712E
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 5 Years, Electronic
UP713E
Installation & Start-up Services
Hardware Installation, Electronic
U4506E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4507E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4509E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
Some DIMM installation guidelines are summarized below:
For servers with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per
server
There are three (3) DIMM slots for each memory channel; eighteen
(18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest
to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest
from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of
the DIMM slots are available
To maximize performance, balance the total memory capacity between
all installed processors
It is not required, but it is recommended to load the channels similarly
if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third
slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank)
within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest
from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels
1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels
1 and 2 will be installed in pairs. The paired slots will be 1,4; 2,5;
3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
Low Voltage DIMMs can only be used with Intel® Xeon® processor
5600 series processors
No mixing DIMM voltage; all DIMMs must be the same voltage
DIMM slot/capacity/populated
speed table
DIMM Type
Registered
DIMMS (RDIMMs)
Unbuffered
with ECC DIMMs (UDIMMs)
DIMM Rank
Single
Rank (1R)
Dual
Rank (2R)
Quad
Rank (4R)
Single
Rank (1R)
Dual
Rank (2R)
DIMM Capacity
4GB
2GB
4GB
8GB
8GB
16GB
4GB
16GB
32GB
1GB
2GB
4GB
DIMM Native
Speed (MHz)
1333
1333
1333
1066
1333
1333
1066
1066
1066
1333
1333
1333
SLOTS THAT
CAN BE POPULATED
18 slot servers
18
18
18
18
18
18
12
12
12
12
12
12
MAXIMUM CAPACITY
(GB)
72
36
72
144
144
288
48
192
384
12
24
48
POPULATED
DIMM SPEED (MHz)
1 DIMM Per
Channel
1333
1333
1333
1066
1333
1333
1066
1066
1066
1333
1333
1333
2 DIMM Per
Channel
1333*
1333*
1333*
1066
1333*
1066/
1033*
800
800
800
1333
1333
1333*
3 DIMM Per
Channel
800
800
800
800
800
800**
n/a
n/a
n/a
n/a
n/a
n/a
*2DPC: LV runs at 1066, Std voltage
runs at 1333
**3DPC: LV/Std voltage runs at 800
NOTES:
Mixing DIMM speeds is allowed, but the system processor speed rules
always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum
clock rate of all DIMMs in the system - even if the slower DIMM is on
the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in
channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with
1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all
other channels, you run at 800MHz
95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's
are capable of up to 1066MHz
References to the above MHz speeds are for the various speeds of DDR3
DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second,
"C" third, etc.
18
DIMM SLOTS (9 per CPU node)
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G
1
G
Chnl
1
2
D
2
D
3
A
3
A
Chnl 2
4
H
4
H
Chnl
2
5
E
5
E
6
B
6
B
Chnl 3
7
I
7
I
Chnl
3
8
F
8
F
9
C
9
C
Standard memory configuration
(1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600
RDIMMs
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G;
empty
1
G;
empty
Chnl 1
2
D;
empty
2
D;
empty
3
A;
2GB DIMM
3
A;
empty
Chnl 2
4
H;
empty
4
H;
empty
Chnl 2
5
E;
empty
5
E;
empty
6
B;
2GB DIMM
6
B;
empty
Chnl 3
7
I;
empty
7
I;
empty
Chnl 3
8
F;
empty
8
F;
empty
9
C;
2GB DIMM
9
C;
empty
Standard memory plus optional
memory (1 CPU model)
54GB, consisting of three (3) 2GB RDIMMs
plus six (6) 8GB RDIMMs
3x 2GB dual-rank PC3-10600 RDIMMs
6x
8GB dual-rank PC3-8500 RDIMMs
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G;
8GB DIMM
1
G;
empty
Chnl 1
2
D;
8GB DIMM
2
D;
empty
3
A;
2GB DIMM
3
A;
empty
Chnl 2
4
H;
8GB DIMM
4
H;
empty
Chnl 2
5
E;
8GB DIMM
5
E;
empty
6
B;
2GB DIMM
6
B;
empty
Chnl 3
7
I;
8GB DIMM
7
I;
empty
Chnl 3
8
F;
8GB DIMM
8
F;
empty
9
C;
2GB DIMM
9
C;
empty
Standard memory replaced
with optional memory (1 CPU model) RDIMM maximum configuration
72GB, consisting of nine (9) 8GB dual-rank PC3-8500 RDIMMs
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G;
8GB DIMM
1
G;
empty
Chnl 1
2
D;
8GB DIMM
2
D;
empty
3
A;
8GB DIMM
3
A;
empty
Chnl 2
4
H;
8GB DIMM
4
H;
empty
Chnl 2
5
E;
8GB DIMM
5
E;
empty
6
B;
8GB DIMM
6
B;
empty
Chnl 3
7
I;
8GB DIMM
7
I;
empty
Chnl 3
8
F;
8GB DIMM
8
F;
empty
UDIMM maximum configuration
(1 CPU model)
12GB, consisting of six (6) 2GB dual-rank PC3-10600
UDIMMs
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G;
empty
1
G;
empty
Chnl 1
2
D;
2GB DIMM
2
D;
empty
3
A;
2GB DIMM
3
A;
empty
Chnl 2
4
H;
empty
4
H;
empty
Chnl 2
5
E;
2GB DIMM
5
E;
empty
6
B;
2GB DIMM
6
B;
empty
Chnl 3
7
I;
empty
7
I;
empty
Chnl 3
8
F;
2GB DIMM
8
F;
empty
9
C;
2GB DIMM
9
C;
empty
Standard memory replaced
with optional memory (2 CPU model) RDIMM maximum configuration
384GB, consisting of twelve (12) 32GB quad-rank PC3L-8500 RDIMMs
CPU1
CPU2
slot #
population order
slot #
population order
Chnl 1
1
G; empty
1
G; empty
Chnl 1
2
D; 32GB DIMM
2
D; 32GB DIMM
3
A; 32GB DIMM
3
A; 32GB DIMM
Chnl 2
4
H; empty
4
H; empty
Chnl 2
5
E; 32GB DIMM
5
E; 32GB DIMM
6
B; 32GB DIMM
6
B; 32GB DIMM
Chnl 3
7
I; empty
7
I; empty
Chnl 3
8
F; 32GB DIMM
8
F; 32GB DIMM
9
C; 32GB DIMM
9
C; 32GB DIMM
UDIMM maximum configuration
(2 CPU model)
24GB, consisting of twelve (12) 2GB dual-rank PC3-10600
UDIMMs
CPU1
CPU2
slot
#
population order
slot
#
population order
Chnl 1
1
G;
empty
1
G;
empty
Chnl 1
2
D;
2GB DIMM
2
D;
2GB DIMM
3
A;
2GB DIMM
3
A;
2GB DIMM
Chnl 2
4
H;
empty
4
H;
empty
Chnl 2
5
E;
2GB DIMM
5
E;
2GB DIMM
6
B;
2GB DIMM
6
B;
2GB DIMM
Chnl 3
7
I;
empty
7
I;
empty
Chnl 3
8
F;
2GB DIMM
8
F;
2GB DIMM
9
C;
2GB DIMM
9
C;
2GB DIMM
NOTE: Capacity
references are rounded to the common Gigabyte values.
HP 4GB (1x4GB) Single Rank x4
PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only
be used with Intel® Xeon® processor 5600 series processors.
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient. NOTE: PC3L is a low voltage memory.
8 x SFF SAS Hot Pluggable Hard
Drive Bays. Optical Media Bay not available for this configuration
1-4
4 x SFF SAS Hot Pluggable Hard
Drives
A
Optical Media Bay
5, 6
Blanks (these HDD Bays are not
available when DVD installed)
Drive Support
Quantity
Supported
Position
Supported
Controller
Removable Media
HP DL360 SL 12.7mm SATA DVD-RW
1
Slim Line Bay
Integrated SATA
HP DL360 SL 12.7mm SATA DVD NOTE: DVD/Optical drive options supported
on 4 hard drive models only.
1
Slim Line Bay
Integrated SATA
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 10K DP
450GB 6G SAS 10K DP
300GB 6G SAS 10K DP
146GB 6G SAS 15K DP
146GB 6G SAS 10K DP
72GB 6G SAS 15K DP
8
1-8
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 6G SAS 7.2K DP 500GB 6G SAS
7.2K DP
8
1-8
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
SATA Hot Plug SFF
(2.5-inch) Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
8
1-8
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
SATA Hot Plug SFF
(2.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 5.4K
120GB 1.5G SATA 5.4K
8
1-8
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
SATA Hot Plug Midline (MDL) Solid
State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
8
1-8
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
60 Modular Smart Array
Up to 4
External
HP Smart Array P212/256 MB Controller
Up to 8
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
70 Modular Smart Array
Up to 2
External
HP Smart Array P212/256 MB Controller
Up to 4
External
HP Smart Array P411/512 MB BBWC
Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
D2600 Disk Enclosure
Up to 4
External
HP Smart Array P212/256 MB Controller
Up to 8
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
D2700 Disk Enclosure
Up to 2
External
HP Smart Array P212/ 256 MB Controller
Up to 4
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
Tape and Disk Backup
NOTE:
For the complete range of StorageWorks tape drives, autoloaders, libraries
and media, including the internal fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Supported
Controller
Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity
matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
N/A
HP StorageWorks USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750
RDX1TB
External
USB 2.0 Port
N/A
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc
- Click on the system of interest. Example: DL360 G7
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power
460 W (at 100 VAC),
460 W (at 200 VAC)
Maximum Peak Power
460 W (at 100 VAC),
460 W (at 200 VAC) NOTE: See Power Supply Specifications
tables for complete details on 460W PSU and optional 750W and 1200W Power
Supply Options.
System Inlet Temperature
Operating
10° to 35° C (50°
to 95° F) at sea level with an altitude derating of 1.0°C per every
305 m (1.8° F per every 1000 ft) above sea level to a maximum of 3050
m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°
C/hr (18° F/hr). The upper limit may be limited by the type and number
of options installed.
System performance may be reduced if operating with a fan fault or above
30° C (86° F).
Non-operating
-40° to 70° C (-40°
to 158° F). Maximum rate of change is 20° C/hr (36° F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh),
28° C (82.4° F) maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh),
38.7° C (101.7° F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value
may be limited by the type and number of options installed. Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23° C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle (Single Processor,
Note 1)
L WAd
4.3 B Average Bystander
L pAm
27 dBA
Operating
L WAd
4.8 B Average Bystander
L pAm
32 dBA
Idle (Dual Processors, Note 2)
L WAd
4.9 B Average Bystander
L pAm
33 dBA
Operating
L WAd
5.4 B Average Bystander
L pAm
38 dBA
NOTES:
Note 1) Configuration tested included an Intel X5520 quad-core 2.27GHz processor,
one 72GB SAS HDD, four 250GB 5400 rpm SATA hard drives, six system fans,
three 4GB(2x2GB) DIMM's, and one power supply (1P SKU).
Note 2) Configuration tested included two Intel X5520 quad-core 2.27GHz
processors, one 72GB SAS HDD, four 250GB 5400 rpm SATA hard drives, eight
system fans, six 4GB(2x2GB) DIMM's, and one power supply (2P SKU).
Note 3) Values are subject to change without notification and are for reference
only.
Note 4) Performance of system, options, and ancillary equipment will vary
depending on the system configuration.
Note 5) Levels presented do not account for non-Hewlett-Packard installed
hardware.
Emissions Classification
(EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22; K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
Integrated Lights-Out
3 (iLO 3)
integrated on system board
Architecture
PCI Express based health and remote
management ASIC
Processor
PCI Express RISC processor core
running at 250MHz
Upgradeability
Option firmware upgradeable via
Flash ROM.
Video Support
1600 x 1200 DVR max resolution
Interfaces
One Ethernet Sideband connection
(10/100/1000 Mb/s)
One Ethernet network connection
(10/100Mb/s)
Memory
128-MB SDRAM with ECC
Operating System
Support
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit
and 64 bit)
Microsoft Windows Server 2008
Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008
Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003
and Windows Server 2003 R2, and Windows Server 2003 for Embedded Systems
Standard Edition, Enterprise Edition
Red Hat Enterprise Linux 5.4 (32
bit and 64 bit)
SUSE LINUX Enterprise Server 11
(32bit and 64bit)
SUSE LINUX Enterprise Server 10
(32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional
Edition
Microsoft Windows Vista Business
and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop
11
SUSE Linux Enterprise Desktop
10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows
and Linux systems)
Firefox 3.0 (on supported Windows
and Linux systems)
Command Line Support
Secure Shell and serial port access
Security
Secure Socket Layer
Secure Shell version 2 (Password
and certificate)
Advanced Encryption Standard (AES)
and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting
interface
RAID 5, 5+0 (Distributed Data
Guarding) NOTE: A minimum or 256 MB cache is
required to enable RAID 5, 5+0 support
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
Embedded NC382i Dual
Port Multifunction Gigabit Server Adapter
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ad 1000Base-TX
IEEE 802.1p 100Base-TX
IEEE 802.1q 100Base-TX
Data Transfer Method
PCI Express, four lanes
(x4)
Controller
BCM5709C
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000 Mb/s
Connector
Two RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to
328 ft (100 m)
100Base-TX
Category 5 or higher UTP; up to
328 ft (100 m)
1000BaseTX
Category 5 or higher UTP; up to
328 ft (100 m)
Environment-friendly Products
and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
633781-B21
© 2013 USA PartsDirect