Optional
3rd and 4th 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays
10.
Full-sized
riser board assembly slot cover
11.
Standard
1st and 2nd 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays
12.
Full
height/full length PCI-Express or HTX slot
What's
New
Support for SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
Support for SAS Hot Plug 3.5" Enterprise (ENT) Hard Drives
At
A Glance
Introducing
the HP ProLiant DL165G5, now available with the latest high performance Opteron
Quad Core processors, increased storage by 2X and a new high efficiency power
supply option.
Processors:
Supports up to two AMD Opteron™ 2300 series
Quad-Core processors
Supports DirectConnect Architecture
Supports Power Now
Memory:
8 DIMM slots supporting up to 32GB REG PC2-6400
DDR2-800 MHz memory with Advanced ECC
8 DIMM slots supporting up to 64GB REG PC2-5300 DDR2-667 MHz memory
with Advanced ECC
Internal Drive Support:
Internal storage capacity:
SATA Capacity: Support for up to 4.0TB (4 x 1TB) with Hot
Plug Model. 3.0TB (4 x 750GB) with Non Hot Plug Model
SAS Capacity: Support for up to 4.0 TB (4 x 1TB) with Hot
Plug Model
NOTE: Installation of the
Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering
third or fourth Hard Drives for Hot Plug models only.
Network Controller:
Embedded NC7782 dual-port gigabit server adapter
Storage Controllers:
Non-Hot Plug SATA Models: HP Embedded SATA Controller NOTE: Raid support requires
optional slot based raid controller.
Hot Plug SATA/SAS Models: HP SC40Ge SAS HBA with RAID 0,1 NOTE: When using the SC40Ge
with SATA Hard Drives, 1.5G SATA Hard Drives are required.
HP ProLiant Lights Out 100i Remote Management support
(IPMI 2.0 and SMASH support)
Virtual Media plus Virtual KVM support with LO100i
Advanced license
HP Insight Control for Linux (IC-Linux), a product option, delivers
essential infrastructure management that can help save time and money
by making it easy to deploy, monitor, control and optimize your IT
infrastructure through a single, simple management console. HP Insight
Control for Linux supports Linux-based servers and management consoles.
USB Ports:
Up to five USB ports (two front & two rear
standard, 1 internal option)
Optical Drive:
Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply:
650W Power Supply standard (Non-Hot Plug, Autoswitching)
500W High Efficiency Power Supply optional (Non-Hot Plug, Autoswitching)
Form Factor:
Rack (1U)
Fixed mounting rails included with all models
Deployment/Serviceability:
Tool-less access to all system components for easy
in-rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR
parts to minimize repair time and allow for greater flexibility in
performing defective parts replacement
Warranty:
This product is covered by a global limited warranty
and supported by HP Services and a worldwide network of HP Authorized
Channel Partners. Hardware diagnostic support and repair is available
for one year from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year
or three year warranty; refer to the specific hard drive QuickSpecs
for details. NOTE: Server Warranty includes
1 year Parts, 1 year Labor, 1-year on-site support with next business
day response. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a Mandatory
CSR part; 2) Optional CSR parts are also designed for easy replacement
but may involve added complexity. Customers may choose to have HP
replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE: For the Standard Features shipped
in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processor One of the following depending on Model
AMD Opteron™ processor
Model 2393SE (3.1GHz, 105W ACP)
AMD Opteron™ processor
Model 2389 (2.9GHz, 75W ACP)
AMD Opteron™ processor
Model 2384 (2.7GHz, 75W ACP)
NOTE: Offered
through Configure-To-Order only. See Factory Integrated Models section for
more details.
AMD Opteron™ processor
Model 2381 HE (2.5GHz, 55W ACP)
AMD Opteron™ processor
Model 2380 (2.5GHz, 75W ACP)
HP 2377EE DL165G5/G5p Kit
AMD Opteron™ processor
Model 23877 EE (2.3GHz, 50W ACP)
AMD Opteron™ processor
Model 2376 (2.3GHz, 75W ACP)
NOTE: Offered
through Configure-To-Order only. See Factory Integrated Models section for
more details.
AMD Opteron™ processor
Model 2374HE (2.2GHz, 55W ACP)
Upgradeability
Upgradeable to two processors
Chipset
ServerWorks HT2100 and HT1000
Cache Memory
Model Series 234x to 236x
128K dedicated L1 per core
512K dedicated L2 per core
2MB shared L3
Model Series 237x to 238x
6MB shared L3
Memory Protection
Advanced ECC
Memory One of the following depending on Model
Type
REG
PC2-6400 DIMMs (DDR2-800)
REG
PC2-5300 DIMMs (DDR2-667)
Standard
2
GB
(2 x 1 GB)
Maximum
32
GB
(8 x 4 GB)
Network
Controller
Embedded NC7782 dual-port gigabit server adapter
Expansion Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
PCI Express
x16
x16
3
Full Height/Full Length
1
HTX
N/A
N/A
9
Full Height/Full Length
2
PCI Express
x4
x8
6
Low-profile
2
PCI-X
64-bit, 133MHz
N/A
2
Low-profile
*
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number.
**
Slots are enumerated differently based on OS. MS OS's enumerate from lowest to
highest Device ID by bus (starting with the lowest bus).
Storage
Controller
Non-Hot Plug SATA
HP Embedded SATA Controller NOTE: Raid support requires optional
slot based raid controller.
Hot Plug SATA/SAS
HP SC40Ge SAS HBA with RAID
0,1 NOTE: When using the SC40Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE:
A diskette drive is needed to install storage controller drivers during a Windows
operating system installation from CD.
HP Lights-Out 100i Remote Management delivers affordable, entry level
remote management capabilities for HP ProLiant 100 Series servers with
embedded LO100i. It allows customers or their service providers to remotely
manage ProLiant 100 Series servers remotely over a LAN or the Internet
and consists of the following:
LO100i Standard is embedded remote management
and provides basic remote control via telnet, browser, and IPMI 2.0
and SMASH and comes standard on all DL100 series servers except for
the DL180 G1 and G5 and the DL120 G5 servers.
LO100i Advanced Pack License are upgrades
for all the features of LO100i Select plus Virtual KVM (graphical hardware-based,
remote console).
NOTE: Flexible and volume quantity (AKA)
license kits are available for the Lights-Out 100i Advanced Pack licenses
as well as Electronic License To Use (E-LTU). AKA Tracking licenses require
a 100 unit minimum forecast at initial contract signing. For these additional
part numbers, please refer to each software products. QuickSpecs at this
link for more information: www.hp.com/go/lo100
HP Insight Control management
software
HP Insight Control for Linux
HP Insight Control for Linux, as a product option, delivers essential
infrastructure management that can help save time and money by making
it easy to deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console. The Insight Control for Linux
suite installs and license software modules that are integrated into HP
System Insight Manager.
The HP Insight Control suite for Linux (IC-Linux) serves environments
requiring a Linux-based management consoles. See www.hp.com/go/ic-linux
HP Insight Control suites include one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Manageability
Embedded HP ProLiant Lights-Out 100i Remote Management, with licensable
upgrades to Lights-Out 100i Advanced.
Security
Power-on password
Setup password
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable
matrix's on the HP Power Protection and Management page. Under Power Cords,
click on the "HP Power Cord Matrix" link. That link will list
cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
NOTE: For more
information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/DL165G5.
Rack
Airflow Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
Rack
Support
The DL Fixed Rail System supports
installation in racks with square or round mounting holes (including Compaq/HP
7000, 9000, 10000 and HP series), with an adjustment range of 24" -
36".
Telco Rack Kit
Installation into Telco 2 post, and 4 post, or threaded
holes racks requires a 3rd party option kit. For additional information,
please visit: www.hp.com/go/rackandpower.
HP Factory Express Capability
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure Enterprise Configurator now provides factory default
racking for our HP hardware portfolio. This approach is aligned with our
strategic direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
Service and Support
HP Care Pack Services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant
solution implementation, maintenance and management.
Support Service - 3-Year 24x7 4 hr Response
service support coverage
Deployment Service - Hardware Installation
Enhanced Service - Optimize service level
to increase IT performance and availability
Support Service - 3-Year 24x7 24 hr
Call to repair service support coverage
Support Service - 3-Year 24x7 6 hr Call to repair service support
coverage
Support Plus - 24x7 4 hr Response service support including
OS coverage
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
NOTE:
High Performance Computing (HPC) interconnect technologies are available
for the DL165 G5 under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html
The ProLiant
Smart Buy program offers a collection of promotional server and option products
that are configured with SMB in mind, offered at discounted prices, and
positioned for quick delivery. Smart Buy server offers are available for
a limited time only.
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO
Chassis. NOTE: FIO indicates that this option is only available as a Factory
Installable Option.
Step 1: Base Configuration
Non-Hot Plug SATA Model
HP ProLiant DL165 G5 Non-Hot Plug
SATA Rack Chassis
445147-B21
Factory Integrated Model ships
with:
Embedded NC7782 dual-port gigabit
server adapter
Two available PCI-Express slots, including one full-length/full height
and one low-profile/half height slot
HP embedded SATA controller
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails
Hot Plug SATA/SAS Model
HP ProLiant DL165 G5 Hot Plug
SATA/SAS Rack Chassis
445148-B21
Factory Integrated Model ships
with:
Embedded NC7782 dual-port gigabit
server adapter
One full-length/full height PCI-Express
slot. Low-profile/half height slot houses the SATA/SAS storage controller
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails
Step 2: Choose
Required Options (only one of the following from each list unless otherwise
noted)
Processors
AMD Opteron™ processor Model
2393SE (3.1GHz, 105W ACP), FIO
500062-B21
AMD Opteron™ processor Model 2389 (2.9GHz, 75W ACP), FIO
500049-B21
AMD Opteron™ processor Model 2384 (2.7GHz, 75W ACP), FIO
500064-B21
AMD Opteron™ processor Model
2381 HE (2.5GHz, 55W ACP), FIO
500058-B21
AMD Opteron™ processor Model
2380 (2.5GHz, 75W ACP), FIO
500060-B21
AMD Opteron™ processor Model
2377 EE (2.3GHz, 50W ACP), FIO
536530-B21
AMD Opteron™ processor Model
2376 (2.3GHz, 75W ACP), FIO
500056-B21
AMD Opteron™ processor Model
2374HE (2.2 GHz, 55W ACP), FIO
500051-B21
Memory
NOTE: Processors
2374 HE and above use PC2-6400 memory except for 8GB DIMMs which remain
PC2-5300 ( 408855-B21 and 495605-B21). PC2-5300 memory (except for kits 408855-B21
and 495605-B21) can only be used with processor models 2360 SE and below.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Required
only if P/N 445147-B21 selected in Step 1.
Serial-ATA
(SATA) Non-Hot Plug Hard Drives (Non-Hot
Plug Models Only)
NOTE: The previous
generation of 1.5G SATA drives are still supported.
Storage Controllers
NOTE: Required
only if P/N 445148-B21 selected in Step 1.
HP Smart Array E500/256MB Controller
with Battery, FIO NOTE: Customers can only order one
Smart Array E500/256MB Controller and one Battery-backed write cache upgrade
(P/N 383280-B21) for the HP ProLiant DL165 G5 server based on battery space.
Battery-backed write cache upgrade
NOTE: RAID 5 support. When installing
a battery-backed write cache module, the HP Smart Array E500 must be installed
in the full-length PCI slot.
NOTE:
Some options may not be available for factory integration. Please contact
an HP sales representative for additional information.
Processor
AMD Opteron™ processor Model
2393SE (3.1GHz, 105W ACP)
500062-B21
AMD Opteron™ processor Model
2389 (2.9GHz, 75W ACP)
500049-B21
AMD Opteron™ processor Model
2384 (2.7GHz, 75W ACP)
500064-B21
AMD Opteron™ processor Model
2381 HE (2.5GHz, 55W ACP)
500058-B21
AMD Opteron™ processor Model
2380 (2.5GHz, 75W ACP)
500060-B21
AMD Opteron™ processor Model
2377 EE (2.3GHz, 50W ACP)
536530-B21
AMD Opteron™ processor Model
2376 (2.3GHz, 75W ACP)
500056-B21
AMD Opteron™ processor Model
2374HE (2.2 GHz, 55W ACP)
500051-B21
AMD Opteron™ processor Model
2360 SE (2.5GHz, 105W ACP)
445983-B21
AMD Opteron™ processor Model
2356 (2.3 GHz, 75W ACP)
445981-B21
AMD Opteron™ processor Model
2354 (2.2 GHz, 75W ACP)
445974-B21
AMD Opteron™ processor Model
2352 (2.1 GHz, 75W ACP)
445971-B21
AMD Opteron™ processor Model
2346HE (1.8 GHz, 55W ACP)
464210-B21
AMD Opteron™ processor Model
2344 HE (1.7 GHz, 55W ACP)
492086-B21
Memory (DIMMs)
NOTE: Processors
2374 HE and above use PC2-6400 memory except for 8GB DIMMs which remain
PC2-5300 ( 408855-B21 and 495605-B21). PC2-5300 memory (except for kits 408855-B21
and 495605-B21) can only be used with processor models 2360 SE and below.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components.
NOTE: Hard drives
have either a one year or three year warranty; refer to the specific hard
drive QuickSpecs for details.
Serial-ATA
(SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)
HP NC522SFP Dual Port 10GbE Server
Adapter NOTE: A minimum of two Gigabytes
(2 GB) of server memory is required per each NC522SFP adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP LO100i Advanced Pack, No Media
1-Server License including 1 year of 24x7 Technical Support and Updates
530521-B21
NOTE: Flexible
and volume quantity (AKA) license kits are available for the Lights-Out
100i Advanced Pack licenses as well as Electronic License To Use (E-LTU).
AKA Tracking licenses require a 100 unit minimum forecast at initial contract
signing. For these additional part numbers, please refer to QuickSpecs at
this link for more information: www.hp.com/go/lo100
HP Insight Software
HP Insight Control for Linux
HP Insight Control for Linux,
1-server license, including one year of 24x7 Technical Support and Updates,
Electronic
T9084BAE
HP Insight Control for Linux,
No Media, 1-Server license, including one year of 24x7 Technical Support
and Updates
464423-B22
HP Insight Control for Linux,
Media pack (DVD) - No licenses included NOTE: Media pack DVD contains HP
Insight Control for Linux, HP Systems Insight Manager, HP Insight Control
power management, HP Insight Control virtual machine management, and an
integrated installer. Licenses must be acquired separately NOTE: This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux
(click on Download button).
464422-B22
NOTE: Electronic
licenses can be used to purchase multiple licenses with a single activation
key, and are available in all countries except China and Japan. Customers
in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Insight Control server deployment
HP Insight Control server deployment
Electronic License including 1 year 24x7 Technical Support and Updates
T9082AAE
HP Insight Control server deployment
1-Server License including 1 year 24x7 Technical Support and Updates
452151-B21
NOTE: Licenses
ship without media. The Insight Control Media Kit can be ordered separately,
or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the Insight Control
QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
Graphic
Cards
HP NVIDIA Quadro FX3700
512MB PCI-e Kit NOTE: Use Slot 2, PCI-E
x16 Full Length Slot.
490062-B21
HP
NVIDIA Quadro FX1700 512MB PCI-e Kit NOTE:
Use Slot 2, PCI-E x16 Full Length Slot.
490646-B21
NOTE:
At this time, these graphic cards are supported on Linux and Windows.
Hot
Plug HDD Backplane Option
Hot
Plug HDD Backplane 1U 2S Kit NOTE:
Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering
third or fourth Hard Drives for Hot Plug models only.
445985-B21
Storage Controllers
NOTE: The addition
of storage controllers for internal hard drive use is intended for use ONLY
with the Hot Plug SATA/SAS Model Chassis (445148-B21).
HP Smart Array E500/256MB Controller NOTE: Standard RAID 0,1, 1+0. NOTE: Customers can only order one Smart Array E500/256MB Controller
and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant
DL165 G5 server based on battery space.
HP Smart Array P400/256MB Controller NOTE: Customers can only order one
Smart Array P400/256MB Controller and one Battery-backed write cache upgrade
(P/N 383280-B21) for the HP ProLiant DL165 G5 server based on battery space.
HP Smart Array P400/512MB BBWC
Controller NOTE: Customers can only order one
Smart Array P400/512MB BBWC Controllers for the HP ProLiant DL165 G5 server
based on battery space.
Battery-backed write cache upgrade
NOTE: Contains battery only. For
Smart Array P400 Controller. NOTE: RAID 5 support. When installing a battery-backed write cache
module, the HP Smart Array E500 must be installed in the full-length PCI
slot.
HP PCI-X L/P Riser Kit NOTE: Replaces the standard Half
Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot.
452698-B21
SAS HBA
HP 8 Internal Port SAS HBA with
RAID NOTE: For use with Hot Plug SAS/SATA
models. NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires
the purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21).
HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT
160 USB tape drive.
AG703A
SAS Rack-Mount
Tape Solutions NOTE: HP recommends purchasing the
HP SC44Ge HBA ( 416096-B21) for a dedicated SAS HBA for tape.
DAT 320 WW SAS External Tape Drive
AJ828A
HP StorageWorks 1U SAS Rack-Mount
Kit with one LTO-4 Ultrium 1760 NOTE: Pre-configured with one LTO-4
Ultrium 1760 SAS tape drive.
EH946A
HP StorageWorks 1U SAS Rack-Mount
Kit NOTE: Supports up to (2) half-height
SAS tape drives.
AE459A
HP StorageWorks DAT 160 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS
Rack-Mount Kit (AE459A).
Q1587A
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS
Rack-Mount Kit (AE459A).
DW085A
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape
Drive NOTE: Mounts inside the 1U SAS
Rack-Mount Kit (AE459A).
EH847A
SCSI Rack-Mount
Tape Solutions NOTE: SCSI Controller required. HP
recommends purchasing the HP SC11Xe HBA ( 412911-B21) for a dedicated SCSI
HBA for tape.
HP StorageWorks 1U SCSI Rack-mount
kit with one LTO-2 Ultrium 448 SCSI Tape Drive (Carbonite) NOTE: Pre-configured with one LTO-2
Ultrium 448 SCSI tape drive.
DW028B
HP StorageWorks 1U SCSI Rack-mount
kit with one LTO-3 Ultrium 920 NOTE: Pre-configured with one LTO-3
Ultrium 920 SCSI tape drive.
EH903A
HP StorageWorks 3U SCSI Rack-Mount
with 1 LTO-4 Ultrium 1840 Tape Drive NOTE: Pre-configured with one LTO-4
Ultrium 1840 SCSI tape drive.
EH926A
For an up-to-date listing
of the latest O/S and software support details for HP Ultrium tape drives,
please visit: http://www.hp.com/go/connect
Tape Autoloaders
HP StorageWorks DAT Autoloader
HP StorageWorks DAT 72x10 tape
autoloader
AE313B
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 LTO-2 Ultrium
448 Tape Autoloader
AH164A
HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install the 1/8
G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount
instructions.
AH166A
NOTE: Please reference
the QuickSpecs for Technical Specifications and http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at: http://www.hp.com/go/ebs.
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1840 SCSI Drive Library
AJ033A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 1 LTO-3
Ultrium 960 SCSI Drive Library
NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module,
redundant hot plug power supplies and hot plug fans. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: http://h18000.www1.hp.com/products/quickspecs/12245_na/12245_na.html
NOTE: Rack-mountable
12-drive (3.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity
and redundant power supplies. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: http://h18000.www1.hp.com/products/quickspecs/12627_na/12627_na.html
NOTE: Rack-mountable
25-drive (2.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity
and redundant power supplies. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: http://h18000.www1.hp.com/products/quickspecs/12652_na/12652_na.html
HP Rack 10000 G2 Series
(Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet 1200mm
Deep - Shock Pallet
AF034A
10642 G2 (42U) Rack Cabinet 1200mm
Deep - Pallet
AF038A
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Shock Pallet
AF044A
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Pallet
AF045A
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm
USB Options
HP USB Internal Cable Kit
451363-B21
1.44MB External USB Floppy Drive
All
DC141B
USB Floppy Drive
DC361B
USB P/S2 Optical Mouse
DC369A
USB Standard Keyboard All
DT528A#ABA
Service
and Support Offerings
(HP Care Pack Services)
Hardware Services 4-Hour On-site
Service
NOTE: To attach
3 year, 4-Hour On-site Service to Smart Buy servers, Smart Buy Care Packs
must be used. For other service levels, order standard Care Pack part numbers.
13-Hour x 5-Day Coverage, 3 Years,
Electronic
U9509E
24-Hour x 7 Day Coverage, 3 Years,
Electronic
U9510E
NOTE: Use one
of the following Smart Buy Care Packs to attach 3 year, 4-Hour On-site Service
to Smart Buy servers. For other service levels, order standard Care Pack
part numbers.
DL16x Smart Buy 4-Hour On-site
Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UK159E
DL16x Smart Buy 4-Hour On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UK160E
Hardware Services Next Business
Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years,
Electronic
U9508E
Hardware Services 6-Hour Call
to Repair On-Site Service
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models". NOTE: Processors 2374 HE and above use PC2-6400 memory except for
8GB DIMMs which remain PC2-5300 ( 408855-B21 and 495605-B21). PC2-5300 memory
(except for kits 408855-B21 and 495605-B21) can only be used with processor
models 2360 SE and below.
HP
ProLiant DL165 G5 (all models)
Standard
Memory 2 GB (2 x 1 GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities
memory installed. Maximum Memory Up to 64GB memory is available
with the optional installation of PC2-5300 Registered DIMM memory kits. Memory
should be installed in pairs and matched for optimum performance.
NOTE:
Chart does not represent all possible memory configurations.
Non-hot plug 3.5" SATA or
Hot-plug SAS/SATA hard drive bays
A
Optional DVD-ROM, or DVD/CD RW
Drive Support
Removable
Media
Quantity Supported
Position Supported
Controller
DVD-ROM
Up
to 1
A
Integrated IDE (ATAPI) (optional)
DVD/CD
RW
Up
to 1
A
Integrated IDE (ATAPI) (optional)
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, and the server backplane)
should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug
3.5" Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Non-Hot Plug
3.5" Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
3.5" SATA Non-Hot
Plug Drives
Quantity
Supported
Position
Supported
Controller
500GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Hot Plug Entry
(ETY) Drives (3.5") NOTE: Installation of the Hot Plug
Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth
Hard Drives for Hot Plug models only.
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
3.5" SATA Hot
Plug Drives
Quantity
Supported
Position
Supported
Controller
750GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SATA 7.2K
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA Controller
SATA Hot Plug 3.5"
Midline (MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
120GB 3G SATA
60GB 3G SATA
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS
HBA with RAID 0, 1 NOTE: When using the SC40Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS
HP Smart Array P400 Controller
HP Smart Array P800 Controller
SAS Hot Plug 3.5"
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 15K
450GB 6G SAS 15K
450GB 3G SAS 15K
300GB 3G SAS 15K
146GB 3G SAS 15K
Up to 4
1-4
HP 4 Internal Port SAS HBA with
RAID
SAS Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1 TB 3G SAS 7.2K
750GB 3G SAS 7.2K
Up to 4
1-4
HP 4 Internal Port SAS HBA with
RAID
Tape and Disk-Based Backup
NOTE: For a complete listing of compatible tape and disk-based
backup offerings, please visit: http://www.hp.com/go/connect NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape
to the same SAS Controller using split cable (supplied with tape drive)
deactivates 1 of the hard drive bays. Actual hard drive bay deactivated
depends on where split cable plugs into SAS drive connector. Example:
3x SAS cable connector plugged into SAS drive connector (5-8) on the back
of the hard drive cage would mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part Number
HP StorageWorks SCSI Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
HP StorageWorks USB Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
DAT 320 USB
1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP StorageWorks SAS Tape Drives, External
DAT 320 SAS
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LTO-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit
One
6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no
longer ship standard with NEMA power cords (163719-002) that allow connection
to 110V wall outlets in a home or office. HP ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with
only a PDU power cord (416151-B21). If a user wishes to power a ProLiant
DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001)
must be ordered separately.
If customers require a local power cord,
they can check the power cord matrix for the appropriate cord. Please see the
following power cord matrix: http://www.hp.com/go/powercordmatrix.
- Click on the system of interest. Example: DL165 G5
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power
900 W (at 100 VAC),
1200 W (at 200 VAC)
Maximum Peak Power
900 W (at 100 VAC),
1200 W (at 200 VAC)
System Inlet Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above
sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit
may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C (-22°
to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh),
28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh),
38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value
may be limited by the type and number of options installed. Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.82 B
LpAm
51.93 dBA
Operating
LWAd
6.84 B
LpAm
51.93 dBA
Emissions Classification
(EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements
HP
160GB 1.5G SATA 7.2K NHP 3.5" ETY HDD 458947-B21
160-GB
7.2K
Capacity
160,041 MB
Height
1.028 in (2.61 cm)
Width
4.0 in (10.16 cm)
Depth
5.787 in (147.0 mm)
Interface
Serial ATA
Transfer
Rate Synchronous
(Maximum)
1.5Gb/s
Native Command Queuing
N/A
Seek
Time
(typical reads, including settling)
Single Track
2.0 ms
Average
<11 ms
Full-Stroke
23.0 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
312,581,808
Operating Temperature
41° to 131°
F (5° to 55° C)
Embedded SATA Controller
Drives Supported
Up to 4 SATA devices
Channels
4 1.5Gb SATA
Storage Capacity
3.0TB internal storage
Data Transfer Method
32-bit/33-MHz PCI bus-master
Maximum SATA Channel Transfer Rate
1.5Gb/s per channel
Maximum Transfer Rate per PCI Bus (peak)
266 MB/s per channel
Protocols
SATA
PIO Mode[0-4]
Cable
SATA
Internal ATA Connectors
Four SATA connectors NOTE: Raid support requires optional
slot based raid controller.
HP
4 Internal Port SAS HBA with RAID
Drives
Supported
Up to 4 SATA/SAS
drives
Channels
4
Storage Capacity
1.8TB
SAS, 3.0TB SATA
Data
Transfer Method
PCI-Express
Maximum SAS Channel Transfer
Rate
3Gb/s per channel
Maximum SAS transfer rate
300Mb/sec
per port
Protocols
Supported
SSP, STP, SMP
Internal Connectors
1
SAS
Embedded
NC7782 dual-port gigabit server adapter
Network
Interface
10Base-T/
100Base-TX/ 1000Base-TX
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3 1000Base-T
IEEE
802.3 100Base-TX
Data
Transfer Method
PCI-X
Network Transfer
Rate
10Base-T (Half-Duplex)
10
Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000Base-TX (Half
and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories
3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category
5 UTP (2 Pair); up to 328 ft (100 m)
Environment-friendly
Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
408855-B21
© 2013 USA PartsDirect