Support for Hot Plug 300GB 3G SAS 10K SFF DP Hard Drive
At
A Glance
This document covers the HP ProLiant
BL685c server blade only. For more information on HP BladeSystem c-Class
Infrastructure and HP BladeSystem c-Class Interconnects, please see the
following QuickSpecs:
The HP ProLiant BL685c delivers no-compromise performance
and expansion in the densest 4P server blade form-factor available to
handle your most demanding applications.
HP ProLiant BL685c server blade includes:
Processor:
Up to four Quad-Core AMD Opteron™
8300 Series processors
Supports up to 2.3
GHz, 1 GHz HyperTransport™; 512KB Level 2 cache memory
per core; 2MB Level 3 cache
Up to four AMD Opteron 8200
Series processors
Supports up to 3.0 GHz,1 GHz HyperTransport™;
1MB Level 2 cache memory per core
Memory:
Up to 64 GB of memory,
supported by (16) slots of PC2-5300 Registered DIMMs at 667 MHz
Supporting memory interleaving
(2:1)
Storage Controller:
Integrated Smart Array
E200i RAID controller with 64 MB cache (with optional battery-backed
write-cache with an upgrade to 128MB cache (BBWC). Supports RAID
0,1.
Internal Drive Support:
Up to 2 small form factor
(SFF) SAS or SATA hot plug hard disk drives
Network Controller:
Four (4) integrated network adapters
One (1) embedded NC326i
Dual Port Gigabit Server Adapter
Two (2) embedded NC373i
Multifunction Gigabit Server Adapters
One (1) additional
10/100 network adapter dedicated to iLO 2 Management NOTE: The Gigabit Ethernet
adapters transmit from the server only at 2000 Mbps, full duplex
per port. For more information, see the "Network Controller"
item in Standards Features section.
Mezzanine Support:
Three (3) ) I/O expansion
mezzanine slots
Supports up to (3) mezzanine cards
Dual-Port Fibre Channel
Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex
or QLogic)
iSCSI Ethernet mezzanine option for optimized
iSCSI connectivity
Ethernet server adapter mezzanine options
for additional network ports
4X DDR InfiniBand (IB) Mezzanine (20
Gb/s) options for low latency server interconnectivity (based
on Mellanox technology)
Internal USB Support:
One (1) internal USB 2.0
connector for security key devices and USB drive key
VMware ESX Server 3i and Citrix XenServer virtualization
technology
Integrated Hypervisors
(optional):
VMware ESX Server 3i virtualization
technology
Citrix XenServer virtualization
technology
Form Factor:
HP ProLiant BL685c server
blade plugs into the BladeSystem c3000 and c7000 enclosures
Management:
HP Integrated Lights-Out
2 (iLO 2) Standard Blade Edition with virtual KVM graphical remote
console, with the option to upgrade to the iLO Advanced for BladeSystem.
iLO Advanced for BladeSystem is a no installation upgrade offering
automatic video footage of the events leading up to the server event
(like bluescreens), automatic video footage of the server blade's
last boot sequence, on-demand video record and playback for training
videos, team collaboration features for up to four users on a single
iLO session, and much more. Learn more at: www.hp.com/go/iLO
HP Insight Control Environment for BladeSystem
management suite delivers comprehensive system health, remote control,
vulnerability scanning and patch management as well as flexible
deployment and power management in one easy to install package.
Operating Systems:
Supports Windows and Linux
Enclosures:
HP offers three different c-Class server
blade enclosures to meet your individual needs:
The HP BladeSystem
c7000 rack enclosure is 10U high and holds up to 8 ProLiant
BL685c servers plugged vertically.
The HP BladeSystem
c3000 rack enclosure is 6U high and holds up to 4 HP ProLiant
BL685c servers plugged horizontally.
The HP BladeSystem
c3000 tower enclosure is designed with casters for sites without
racks and holds up to 4 HP ProLiant BL685c servers plugged vertically.
Server blades, storage
blades, and interconnect modules are all designed to fit into the
c7000 and c3000 enclosures.
This product is covered by a global limited
warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and
repair is available for three years from date of purchase. Support
for software and initial setup is available for 90 days from date
of purchase. Enhancements to warranty services are available through
HP Care Pack services or customized service agreements. SATA hard
drives have a one year warranty. SAS drives have a 3 year warranty.
NOTE: Server
Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge
will result when customers decline to replace a Mandatory CSR part;
2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
AMD
Opteron™ processor Model 8356 (2.3 GHz, 75W ACP)†
AMD Opteron processor Model
8354 (2.2 GHz, 75W ACP)†
AMD Opteron processor Model
8222 (3.0 GHz, 95W)
AMD
Opteron processor Model 8220 (2.8 GHz, 95W)
AMD Opteron processor Model 8218 (2.6 GHz, 95W)
AMD
Opteron processor Model 8216 (2.4 GHz, 95W)
AMD
Opteron processor Model 8214 (2.2 GHz, 95W)
Low
Power AMD Opteron processor Model 8347 HE (1.9 GHz, 55W ACP)†
Low Power AMD Opteron processor
Model 8218 HE (2.6 GHz, 68W)*
* Offered through Configure-To-Order
process only. See Factory Integration Models section for more details. †
Processor wattage references reflect Average CPU Power (ACP). For more information
on ACP visit: http://www.amd.com/powernow. NOTE: AMD Opteron 8200 series processors are 64-bit, dual-core, and
support AMD Virtualization™. AMD Opteron 8300 series processors are
64-bit, quad-core, and support AMD Virtualization™. NOTE: The BL685c only supports those processors listed above. Processor
models greater than 8356 are not supported on the BL685c.
Upgradeability
Upgradeable to quad (4) processors
NOTE: The HP ProLiant BL685c only
supports 2 and 4 processor configurations.
NOTE:
Memory must be installed in pairs. NOTE: DIMMs must be installed
in decreasing capacity with the largest DIMMs installed in the banks furthest
away from each processor.
Network
Controller
Four (4) embedded network adapter
ports, plus one (1) additional management port consisting of:
One (1) embedded NC326i Dual Port Gigabit Server Adapter
Two (2) embedded NC373i Multifunction Gigabit Server Adapters
One (1) embedded 10/100 network adapter dedicated to iLO 2 Management
NOTE: The Gigabit Ethernet adapters
transmit from the server only at 2000 Mbps, full duplex per port. However,
within a Linux environment, the speed can be reduced or "throttled"
using a feature available within the Linux operating system; see the white
paper at: http://h71028.www7.hp.com/ERC/downloads/4AA1-5513ENW.pdf
for more information.
Once the adapter signal reaches the interconnect within the blade enclosure
and communicates outside the blade enclosure to the LAN, the blade interconnect
uplink types and settings determine the cable media, speed, duplex mode,
and auto negotiation mode.
Multifunction
Networking
The embedded multifunction NC373i combines standard Gigabit Ethernet
networking, TCP/IP offload engine (TOE) acceleration, iSCSI boot, and
optional accelerates iSCSI into a single adapter.
TOE moves the processing of data in the TCP protocol stack from the
server CPU to the network card, freeing CPU cycles for other activities.
With TOE, network communications are improved, and server efficiency
is increased. The NC373i offers TOE for Microsoft® Windows environments.
The iSCSI network boot (iSCSI boot) allows the BL685c to boot from
a remote operating system (OS) image located on a storage area network
(SAN) within a Microsoft Windows and Linux environment. The BL685c uses
an iSCSI firmware image (iSCSI boot option ROM) making the remote disk
drive appear as a local, bootable C: drive. The BL685c is configured
to connect to and boot from the iSCSI target disk on the network and
download the OS image from the iSCSI target disk. The iSCSI boot option
ROM is supplied by HP at no cost. Additionally, cost and mezzanine slot
usage of an add-in iSCSI HBA card is not required. Additionally, the
HP iSCSI boot solution includes scripts to significantly simplify the
installation process.
I/O Expansion Slots
Three I/O expansion mezzanine
slots (All x8 PCI Express)
Integrated Manageability
Integrated Lights-Out 2 (iLO
2) Standard Blade Edition (integrated on motherboard)
Storage Controller
Smart Array E200i Controller
64MB memory module
supports RAID 0,1
Available upgrades: 128MB with Battery-backed write cache
Maximum
Internal Storage
Hot Plug Serial
Attach SCSI (SAS)
600GB SAS
2 x 300GB Serial SCSI
Hot
Plug Serial ATA (SATA)
500GB SATA
2 x 250GB Serial ATA
Graphics
Integrated
ATI RN-50 1280 x 1024 x 16M color (32 MB DDR memory)
Graphics
Resolution Supported
Resolution
Color Depths
1280 x 1024,
16.7M , 64k, 256,16 1024 x 768, 16.7M, 64k, 256, 16 800 x 600, 16.7M,
64k, 256, 16 640 x 480, 16.7M, 64k, 256, 16
Fibre Channel Support
Two optional Fibre Channel HBAs are supported by the HP ProLiant BL685c. Both
mezzanine circuit boards connect directly to the server blade system board. These
Fibre Channel HBAs are available via option kits ordered separately.
Two
option kits
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem ( 403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's
renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all
Emulex HBAs
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem ( 403619-B21)
Uses common drivers which means that customers can standardize on one QLogic
driver whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by
QLogic
Emulex and QLogic Fibre Channel HBAs feature
Optimal
performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds
Dual-ports
for redundant path connections
Up to two FC HBAs per server blade providing
redundant FC HBA support
Optimized for HP StorageWorks and supported by
third party SAN vendors
Support for Microsoft® Windows® and Linux
operating systems environments
Insight Control Environment
for BladeSystem Management Suite
Insight Control Environment for BladeSystem delivers
foundation management for HP BladeSystem lifecycles, including hardware
resource deployment, health monitoring, software version control, performance
monitoring, vulnerability scanning and patch management.
Insight Control Environment for BladeSystem installs and licenses the
following components by default using a wizard-based integrated installer:
HP Systems Insight Manager
HP iLO Select Pack
HP Insight Power Manager
HP ProLiant Essentials Rapid Deployment Pack
HP ProLiant Essentials Performance Management Pack
HP ProLiant Essentials Vulnerability and Patch Management
Pack
HP ProLiant Essentials Virtual Machine Management
Pack
Additional ProLiant Essentials software and management
tools included on the Insight Control Management kit can be installed
manually.
HP Server Migration Pack - Universal Edition NOTE: HP Server Migration Pack
- Universal Edition is licensed separately from the Insight Control
Environment Suite.
HP Open Service Event Manager
HP Instant Support Enterprise Edition
NOTE: HP Server
Migration Pack - Universal Edition can be installed from the SMP-P2P CD
included in the Insight Control Management media kit. NOTE: Insight Control Environment for BladeSystem can be installed
from the Insight Control Management DVD, which can be delivered with HP
BladeSystem c-Class enclosures with a choice of licensing options. Licensing
options include a free 30 day evaluation license for 8 servers (default
option for every enclosure order), a full purchased license for 8 blade
servers or a full purchased license for 16 blade servers). For additional
information on HP c-Class Infrastructure please visit: HP BladeSystem
c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: For additional product
and licensing information about Insight Control Environment for BladeSystem,
HP Systems Insight Manager and Essentials software refer to http://www.hp.com/go/proliantessentials.
HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive
discovery, imaging & deployment, monitoring, and management for Linux-based
ProLiant server platforms. Built on the industry-leading HP Systems Insight
Manager framework, this solution integrates open source technology with
experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters,
while providing paths to the future with developing management technologies.
iLO Power Management Pack for BladeSystem is energy-efficient management
software that delivers centralized control, reliable security, and energy
savings for your BladeSystem infrastructure. iPMP combines the total control
of iLO 2 Advanced in the area of remote management with the energy monitoring
and control of the Insight Power Manager to deliver a robust solution
capable of full remote control and power management of ProLiant servers
through a unified interface within HP Systems Insight Manager.
HP Insight Control management suites and most HP ProLiant Essentials include
one year of 24 x 7 HP Software Technical Support and Update Service ensuring
rapid access to HP support staff and proactive delivery of software updates.
For more information about this service, please visit: http://www.hp.com/services/insight.
Server Management
Stand Alone Software Product - ProLiant Essentials
HP Systems Insight Manager
HP Systems Insight Manager (HP
SIM) provides a unified, secure and extensible standards-based environment
to centrally manage servers, storage and other infrastructure devices, (both
HP and non-HP) across multiple operating system platforms.
ProLiant Essentials Rapid Deployment
Pack
Rapid Deployment Pack (RDP)
extends HP Systems Insight Manager with a complete deployment solution for
HP ProLiant blade servers. RDP provides a central location to configure
server hardware, deploy Windows, Linux and VMware ESX operating environments
and install HP ProLiant Support Pack drivers using images and scripted profiles.
ProLiant Essentials Performance
Management Pack
Performance Management Pack
(offered exclusively through the Insight Control suites) - a performance
management solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better utilize
their valuable resources.
HP Insight Dynamics - VSE
Introducing HP Insight Dynamics
- VSE, the world's first software integrated by design to let IT professionals
analyze and optimize their virtual & physical environments in the same
way. It combines the best of the industry-leading HP infrastructure management
portfolio-including HP Systems Insight Manager, HP Insight Control and HP
Virtual Server Environment-into one integrated offering for HP BladeSystem,
ProLiant and Integrity servers. NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
Server Migration Pack - Universal
Edition
Upgrading, replacing, or virtualizing your existing server? Effortlessly
transition to new virtual or physical HP ProLiant servers or BladeSystem
with automated, accurate and affordable migration of OS, application and
data. SMP Universal automates the manual processes required for migrating
servers between physical or virtual platforms, whether migrating to VMware
or Microsoft virtual machines. SMP Universal allows all of the following:
Physical to ProLiant
Physical to virtual
Virtual to virtual
Virtual to ProLiant
Virtual Machine Management Pack
Get the most out of server virtualization
by unifying the management of physical and virtual servers in HP Systems
Insight Manager. The Virtual Machine Management Pack plug-in provides central
management and control of VMware and Microsoft virtual machines and provides
physical host to virtual machine association.
Vulnerability and Patch Management
Pack
Vulnerability and Patch Management
Pack (offered exclusively through the Insight Control suites) - identifies
and remediates software security vulnerabilities due to missing patches
as well operating system configurations that can be exploited by viruses,
worms, and other blended threats.
iLO Advanced for BladeSystem
Upgrades the iLO 2 processor
with enhanced console sharing and replay, virtual media (floppy, CD/DVD,
USB key), virtual folders, historical power reporting, power capping and
enterprise security (directory services and two-factor authentication) for
servers managed using remote consoles available in iLO 2 Standard Blade
Edition.
Insight Power Manager (IPM)
Upgrades the single-server remote management capabilities of iLO Select/Advanced
to include centralized reporting and policy-based management of power
consumption and thermal output provided by the Insight Power Manager.
IPM unifies all of this functionality within a single user interface -
HP Systems Insight Manager.
NOTE: Flexible and volume quantity license kits are available
for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/go/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: Selected software packages listed here include one year
of 24 x 7 Software Technical Support and Update Service. If you have any
questions about this service please visit the HP website at: http://www.hp.com/services/insight
Core Infrastructure Management
SmartStart
SmartStart
is a tool that simplifies single server setup, providing a rapid way to deploy
reliable and consistent server configurations. SmartStart 7.60 and later can now
deploy the HP ProLiant BL685c using the I/O port with an attached USB CD-ROM device.
To obtain a copy of SmartStart for your blade server order or download your copy
from the SmartStart web site. For more information, please visit the SmartStart
Web site at: http://www.hp.com/servers/smartstart. SmartStart
version supported (minimum): SmartStart 7.60
The
Insight Management Agents should be installed on all HP servers to present system
instrumentation, health and configuration information into HP Systems Insight
Manager and the HP System Management Homepage. The HP System Management Homepage
aggregates systems data from Insight Management Agents and other HP management
tools, providing a consolidated browser-based interface for managing individual
servers.
Subscriber's
Choice
Subscriber's
Choice Driver and Support Alerts/Notifications is a web-based email subscription
service that provides software and driver change notifications for ProLiant products.
Sign up at: http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis.
ProLiant
Support Packs and ROMPaq, software
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available through ProLiant Support Packs the ProLiant Essentials
Rapid Deployment Pack, SmartStart or downloaded from Software and Drivers download
pages website at: http://www.hp.com/go/support.
HP Serviceguard for Linux (SGLX)
HP Serviceguard for Linux is a high availability clustering
solution designed to protect applications and services from a wide variety
of software and hardware failures, monitoring the health of each server
(node) and quickly responding to failures such as those that affect system
processes, system memory, LAN media and adapters, and application processes.
The following is a quick summary of HP Serviceguard for Linux features
and support. For the most recent list of Linux distributions & kernels,
servers and storage supported with Serviceguard for Linux, see the Serviceguard
for Linux Certification Matrix, available at: http://www.hp.com/go/sglx/info.
Supported Linux Distributions:
Red Hat EL 4
Red Hat EL 5
SUSE SLES10
Supported Server Platforms
HP Integrity BladeSystem to Superdome
HP ProLiant BladeSystem p-Class & c-Class
HP ProLiant DL
HP ProLiant ML
IBM System x
Dell PowerEdge
Sun x64
Fujitsu Siemens PRIMERGY
Supported Virtual Machines
SG/LX in HP Integrity Virtual Machines guests
SG/LX in VMware ESX guests
SG/LX in Red Hat and SUSE Xen hosts (DOM0)
Application Integration Toolkits
HP Serivceguard for Linux Oracle Database Toolkit
HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
Free Application Integration Toolkits:
Apache
MySQL
NFS
PostgreSQL
Samba
Tomcat
Sendmail
Disaster Tolerant Solutions
HP Serviceguard for Linux Extended Distance Cluster (XDC) extends
cluster distances up to 100 km, utilizes software RAID mirroring for
data replication and is storage array independent
HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX)
works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous
Access, and HP Disk Arrays to automate failover and failback between
sites
Software updates are distributed by HP Services to
customers with support contracts
NOTE: The above is not a complete list
of all HP Serviceguard for Linux product numbers For a detailed list of
supported configuration/certification options for HP Serviceguard for
Linux please refer to the HP Serviceguard for Linux Configuration &
Ordering Guide available at: http://www.hp.com/go/sglx/info.
OS Support
Microsoft Windows Server 2008
Microsoft Windows Server 2003 R2
Microsoft Windows Compute Cluster Server 2003
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Oracle Enterprise Linux (OEL)
Sun Solaris for x64/x86-based Systems
VMware
Citrix XenServer
NOTE: For more information on HP's Certified
and Supported ProLiant Servers for OS and Virtualization Software and
latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/supportos.
Integrated
Manageability
Integrated Lights-Out
2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Virtual KVM based remote console
Virtual media (single server,
browser based access only)
Remote Serial Console
Virtual Power
Button Control
Virtual Unit ID control
Integrated Remote Console
(ActiveX Control client)
Dedicated network connectivity
OS independent
hardware health status
Present server power consumption
Browser,
command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell
security (SSH)
Advanced Encryption Standard (AES)/Triple Data Encryption
Standard (3DES)
IML and iLO Event Logging
Support for 12 user
accounts with customizable access privilege
Single sign-on from HP BladeSystem
Onboard Administrator
NOTE:
Advanced features such as Graphical Remote Console and browser accessible Virtual
Floppy/CD-ROM are included with the BL685c server blade.
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Two
embedded Gigabit Ethernet adapters for redundant LAN connections Two hot-plug
SAS/SATA hard drive bays and integrated RAID (Smart Array E200i) controller on
every server blade (Battery-backed write cache is optional.) Redundant ROM
on each server blade Multiple mezzanine I/O expansion ECC Memory Network
adapter teaming (network fault tolerance, transmit load balancing, switch-assisted
load balancing)
Industry
Standard Compliance
ACPI 2.0
Compliant PCI 2.2 Compliant WOL Support Microsoft® Logo certifications
USB 2.0 Support
Security
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
Factory
Express Portfolio for Servers and Storage
HP
Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory Express
offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such
as image loading, asset tagging, and custom packaging. HP products supported through
Factory Express include a wide array of servers and storage: HP Integrity, HP
ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as
the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP
Enterprise Configurator
The HP eConfigure Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance.
Service
and Support
HP Care Pack services provide total care and support expertise with committed
response designed to meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover
the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
To fully capitalize on your HP BladeSystem servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a HP BladeSystem server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation,
maintenance and management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7,
Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem
Infrastructure
Enhanced Service - Optimize service level to increase IT performance
and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up
for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure
plus HP BladeSystem Enhanced Network Installation and Start-UP as per
the Customer Description and/or Data Sheet. To be delivered on a scheduled
basis 8am-5pm, M-F, excluding HP holidays.
Processor(s) One of the following depending on model
(2) AMD Opteron™ processor Model
8222 (3.0 GHz)
(2) AMD Opteron processors Model 8220 (2.8 GHz)
(2) AMD Opteron processors Model 8218 (2.6 GHz)
(2) AMD Opteron processors Model 8216 (2.4 GHz)
(2) AMD Opteron processors Model 8214 (2.2 GHz)
Cache Memory
1 MB Level 2 cache memory per
core
Memory
4 GB (4 x 1 GB) PC2-5300, Registered
DDR2-667
Network Adapter
One (1) embedded NC326i Dual
Port Gigabit Server Adapter, Two (2) embedded NC370i Multifunction Gigabit
Server Adapters plus one (1) additional 10/100 server adapter dedicated
to iLO 2 management
Storage Controller
Smart Array E200i Controller
with 64MB (optional battery-backed write cache)
Hard Drives
No drives included; (2) SFF
SAS/SATA drive bays
Internal Storage
SAS: 600GB
SATA: 500GB
Optical Drive
None
Form Factor
Up to 4 full-height blades supported
in the HP BladeSystem c3000 Enclosure
Up to 8 full-height blades supported in HP BladeSystem c7000 Enclosure
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory Integrated
Model. To ensure only valid configurations are ordered, HP recommends the
use of an HP approved configurator. Contact your local sales representative
for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1. NOTE: FIO indicates that this option is available only as a Factory
Installable Option.
Step 1: Base Server
Blade Configuration
Models
HP ProLiant BL685c
CTO Blade (North America)
405024-B21
One (1) embedded
NC326i Dual Port Gigabit Server Adapter, two (2) embedded NC373i Multifunction
Gigabit Server Adapters, and one (1) additional 10/100 network adapter dedicated
to iLO 2 Management
Integrated Smart
Array E200i RAID controller NOTE: Controller cache module selection is required. Select either
the standard 64 MB module or the optional 128 MB module in step 2 below.
Two
small form factor (SFF) SAS/SATA hot plug hard drive bays
Integrated
Lights-Out 2 Standard Blade Edition
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted):
Processors
For dual (2) processor configurations choose (one of the following):
AMD Opteron™ processor Model 8222 (3.0 GHz, 95W) Option Kit, FIO Base
454907-B21
AMD
Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438820-B21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit, FIO Base
409613-B21
AMD Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit, FIO Base
409612-B21
AMD Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit, FIO Base
409611-B21
Low
Power AMD Opteron processor Model 8218 HE (2.6 GHz, 68W), FIO Base
440936-B21
OR
For quad (4)
processor configurations choose (one of the following):
AMD Opteron processor Model 8222 (3.0 GHz, 95W) Option Kit, FIO Base
454907-B21
AMD
Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438820-B21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit, FIO Base
409613-B21
AMD Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit, FIO Base
409612-B21
AMD Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit, FIO Base
409611-B21
Low
Power AMD Opteron processor Model 8218 HE (2.6 GHz, 68W) Option Kit, FIO Base
440936-B21
Plus
(one of the following):
AMD Opteron processor
Model 8222 (3.0 GHz, 95W) Option Kit
454907-B21
AMD
Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit
438820-B21
AMD
Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit
409613-B21
AMD
Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit
409612-B21
AMD
Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit
409611-B21
Low
Power AMD Opteron processor Model 8218 HE (2.6 GHz, 68W) Option Kit
440936-B21
NOTE:
All HP ProLiant BL685c processor option kits contain two processors.
NOTE:
The HP ProLiant BL685c only supports 2 and 4 processor configurations.
HP NC325m PCI Express Quad Port
1Gb Server Adapter for c-Class BladeSystem
416585-B21
HP NC326m PCI Express Dual Port
1Gb Server Adapter for c-Class BladeSystem
406771-B21
HP NC360m Dual Port 1GbE BL-c
Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c
Adapter
447883-B21
HP NC373m PCI Express Dual Port
Multifunction Gigabit Server Adapter for c-Class BladeSystem
406770-B21
HP NC382m Dual Port 1GbE Multifunction
BL-c Adapter
453246-B21
NOTE: The Gigabit
Ethernet adapters above transmit from the server only at 2000 Mbps, full
duplex per port. For more information, see the "Network Controller"
segment in the Standards Features section.
HP NC512m Dual Port 10GbE Multifunction
BL-c Adapter. NOTE: An NC512m network adapter card
is required for each server blade connecting to the HP 10Gb Ethernet BL-c
Switch. NOTE: The NC512m is supported in type II x8 PCI Express mezzanine
slots; maximum one adapter per server. For more information, see the Mezzanine
Slot Compatibility matrix within the HP NC512m Dual Port 10GbE Multifunction
BL-c Adapter QuickSpecs: http://h18004.www1.hp.com/products/servers/networking/nc512m/index.html NOTE: A minimum of 2 GB of server memory is required per NC512m and
supports a maximum of 32 GB for Windows and 64 GB for Linux. NOTE: The NC512m adapter transmits from the server only at 20 Gbps,
full duplex per port.
440910-B21
HP NC532m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter NOTE: The NC532m network adapter
card is required for each server blade connecting to a 10Gb interconnect
in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem
c3000 Enclosure) NOTE: The NC532m requires a minimum of 2 GB of server memory. NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
467799-B21
QLogic QMH4062 1Gb E iSCSI Adapter
for HP BladeSystem c-Class
488074-B21
Fibre
Channel Mezzanine Options
Emulex
LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus Adapter
HP 4X DDR IB Dual Port Mezzanine
HCA for HP BladeSystem c-Class
448262-B21
HP 4X DDR IB Mezzanine HCA for
HP BladeSystem c-Class
410533-B21
c-Class
Mezzanines
HP PCI Express
Mezzanine Pass-Thru Card for HP BladeSystem c-Class NOTE:
Required to support the HP StorageWorks SB40c Storage Blade HP BladeSystem
PCI Expansion Blade, HP StorageWorks Ultrium 448c Tape Blade, and HP StorageWorks
SB920c Tape Blade with HP c-Class BladeSystem full-height server blades (e.g.
BL480c, BL680c, BL685c)
HP PCI Expansion Blade NOTE: Ships with one pre-installed
PCI-X connect board. Also includes one PCIe connect board which requires
installation. NOTE: Please see the QuickSpecs for Technical Specifications and
additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
HP
Insight Control Environment for BladeSystem Management Suite
NOTE:
Electronic licensing options are available for select ProLiant Essentials
software products. Please see the appropriate ProLiant Essentials QuickSpecs
for additional information.
Insight Control Environment
for BladeSystem
HP Insight Control
Environment for BladeSystem, No Media 1-Server License including 1 year
of 24x7 Technical Support and Updates NOTE: Contains 1 license for each
of RDP, PMP, VMM, VPM, IPM and iLO Select. Includes one year of 24 x 7 HP
Software Technical Support and Update Service NOTE: Customer will receive a printed license entitlement certificate
and documentation via physical shipment. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
453484-B21
HP Insight Control
Management Software Media Kit NOTE: Insight Control Management
DVD media without licenses. Contains Insight Manager and Essentials software
products and components licensed by Insight Control Management suites. Uses
an integrated installer to perform quick and accurate software installation
and updates.
HP Insight Control
Environment for Linux v2.0, Media pack (CD) - No licenses included NOTE: This optional Media pack CD
contains the ISO image for HP Insight Control Environment for Linux, HP
System Insight Manager, and an integrated installer. Servers must be acquired
separately. This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
464422-B21
HP Insight Control
Environment for Linux v2.0, No Media, 1-Server license, including One year
of 24x7 Technical Support and Updates NOTE: This part number can be used
to purchase one (1) license with a single activation key. Customer will
receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service. One certificate is shipped
for each license.
HP iLO Power Management
Pack for BladeSystem, No Media, 1-Server License including 1 year of 24x7
Technical Support and Updates NOTE: This option kit includes 1
license for iLO Select and Insight Power Manager. Customer will receive
a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support and Update Service.
Server
Management
Stand Alone Software Product - ProLiant Essentials
NOTE:
Electronic licensing options are available for select ProLiant Essentials
software products. Please see the appropriate ProLiant Essentials QuickSpecs
for additional information.
Deploy
ProLiant Essentials
Rapid Deployment Pack
ProLiant Essentials
Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
452151-B21
NOTE:
This license allows 1 server to be deployed and managed via RDP. Customer
will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service.
HP Server Migration
Pack - Universal Edition, No Media, Physical / Virtual to ProLiant Single
Migration License, including 1 year of 24x7 Technical Support NOTE: This license allows 1 physical
to ProLiant or virtual to ProLiant migration. Customer will receive a printed
license entitlement certificate and documentation via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service
460750-B21
HP Server Migration
Pack - Universal Edition, No Media, Physical / Virtual to Virtual Single
Migration License, including 1 year of 24x7 Technical Support NOTE: This license allows 1 physical
to virtual or virtual to virtual migration. Customer will receive a printed
license entitlement certificate and documentation via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service.
460753-B21
HP Server Migration
Pack - Universal Edition, No Media, 1-Year Unlimited Migration License,
including 1 year of 24x7 Technical Support and Updates NOTE: This license
allows unlimited migrations (physical to ProLiant, physical to virtual,
virtual to virtual, and virtual to ProLiant) for one year. Customer will
receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support and Update Service.
HP Insight Dynamics-VSE
without Insight Control Environment, 1-server license including 1 year of
24x7 Technical Support and Updates NOTE: This license supports HP ProLiant
ML/DL and c-Class Blade servers. Customer will receive via email a receipt
and link to a license entitlement certificate.
483531-B21
HP Insight Dynamics-VSE
with Insight Control Environment, 1-server license including 1 year of 24x7
Technical Support and Updates NOTE: This license supports HP ProLiant
c-Class Blade servers. Customer will receive a printed license entitlement
certificate via physical shipment.
HP ProLiant Essentials
Integrated Lights-Out Advanced for BladeSystem, No Media, 1-Server License,
including 1 year of 24x7 Technical Support and Updates
HP Insight Power
Manager, No Media, 1-Server License, including 1 year of 24x7 Technical
Support and Updates NOTE: Customers purchasing this upgrade
must already have an iLO Advanced or Select license on each managed server.
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Includes one year
of 24 x 7 HP Software Technical Support and Update Service.
ProLiant Essentials
Virtual Machine Management Pack, No Media, 1-Server License, including 1
year of 24x7 Technical Support and Updates NOTE: Customer will receive a printed
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
452153-B21
NOTE:
For additional license kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.html NOTE: Electronic licensing options are available for Insight
Control suites and select ProLiant Essentials software products. Please
see the appropriate Insight Control and ProLiant Essentials QuickSpecs for
additional information.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/go/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/go/proliantessentials.
HP Serviceguard Linux for HP ProLiant/x86
Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
463831-B21
HP Serviceguard Linux Oracle Database
Toolkit for HP ProLiant/x86 Servers
Licensed per cluster
Includes media and One Year 24x7 Software Support & Updates
463833-B21
HP Serviceguard Extension for
SAP on Linux for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
463834-B21
HP Serviceguard Linux Extended
Distance Cluster (XDC) for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
463835-B21
NOTE: The above
is not a complete list of all HP Serviceguard for Linux product numbers
For a detailed list of supported configuration/certification options for
HP Serviceguard for Linux please refer to the HP Serviceguard for Linux
Configuration & Ordering Guide available at: http://www.hp.com/go/sglx/info.
USB Options
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver)
Service
and Support Offerings (HP Care Pack Services)
NOTE:
The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour
On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UK108E
4-Hour
On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UK109E
6-Hour
Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UK110E
Support Plus 24
Onsite
HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time including HP holidays, Electronic
All DIMMs must be PC2-5300
Registered DDR2 DIMMs (667 MHz).
Both DIMM
slots in a memory bank must be populated.
Banks must
be populated in sequential alphabetic order, starting with bank A.
Both DIMMs
in a memory bank must be identical. Install identical DIMMs as pairs
only, starting with DIMM socket 1, bank A.
Multiple advanced
memory protection (AMP) modes are supported, based on DIMM population
and RBSU selection. The server blade defaults to Advanced ECC.
DIMMs must
be installed in decreasing capacity with the largest DIMMs installed
in the banks furthest away from each processor.
DIMM banks are active only when the corresponding
processor socket is populated.
HP ProLiant BL685c Server Blade
Standard Memory
4096 MB (4 x 1024 MB) of PC2-5300, Registered DDR2-667 ECC DIMMs.
Standard Memory Plus Optional Memory
Up to 53248-MB of PC2-5300, Registered DDR2-667 ECC DIMMs. Memory is available
with the installation of optional PC2-5300, Registered DDR2-667 DIMM memory
expansion kits.
Standard Memory Replaced with Optional Memory
Up to 65536-MB of PC2-5300, Registered DDR2-667 ECC DIMMs. Memory is available
with the removal of standard memory and the installation of optional PC2-5300,
Registered DDR2-667 DIMM memory expansion kits.
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault or
above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F), maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
10
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
DDR-1/266
MHz provides up to 4.2 GB/s maximum bandwidth.
Server Interface
x4 2.5G
PCIe provides 2GB/s maximum bandwidth.
SAS Speed
x2 3G SAS provides
600MB/s maximum bandwidth.
Cache Memory
40-bit 64MB
or 128MB cache: ECC protection, battery-backed, and transportable
Logical Drives Supported
Up
to 32 logical volumes
Maximum Logical Drive Capacity
292GB
(2 x 146GB)
Host
Memory Addressing
64-bit, supporting greater than
4 GB server memory space
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
Upgradeable
Firmware
Embedded NC326i Dual
Port Gigabit Server Adapter
Network Processor
Broadcom 5715S
Data Transfer Method
Four lane (x4) PCI Express
Network Transfer Rate
Two ports, each at
2000 Mb/s NOTE: The Gigabit Ethernet adapters
above transmit from the server only at 2000 Mbps, full duplex per port.
For more information, see the "Network Controller" segment in
the Standards Features section.
IEEE Compliance
802.1p, 802.1Q, 802.3, 802.3ad,
and 802.3x
Standard Features
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
Embedded NC373i Multifunction Gigabit Server Adapter
Network
Processor
Broadcom 5708S
Data Transfer Method
Four
lane (x4) PCI Express
Network
Transfer Rate
2000 Mb/s NOTE: The Gigabit Ethernet adapters
above transmit from the server only at 2000 Mbps, full duplex per port.
For more information, see the "Network Controller" segment in
the Standards Features section.
IEEE
Compliance
802.1p, 802.1Q, 802.3,
802.3ad, and 802.3x
Standard
Features
TCP/IP offload engine (TOE) for Microsoft Windows 2003
iSCSI Boot for Microsoft Windows and Linux
Optional accelerated iSCSI for Microsoft Windows and Linux
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Microsoft Windows
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard
offers end-of-life HP product return, trade-in, and recycling programs in many
geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
403621-B21
© 2013 USA PartsDirect