Overview

HP Serial-ATA (SATA) Hard Drive Option Kits

HP offers a variety of tested, HP-qualified, SMART* capable, SATA Hard Drives offering data integrity and availability in hot-pluggable models. HP 3.5" and Small Form Factor (2.5") SATA drives provide the lowest cost per GB targeted for non-mission critical applications with low workloads of 40% or less. All SATA drives offer a one-year limited warranty.

All HP hard drives pass a rigorous qualification process, which ensures that every HP drive is proven to perform in your HP ProLiant server. Before final certification, all HP SATA hard drives are optimized for compatibility and functionality, including support of SMART and HP Systems Insight Manager.

*S.M.A.R.T.: Self Monitoring Analysis and Reporting Technology, first developed at HP, detects possible hard disk failure before it occurs, allowing replacement of the component before failure occurs.

What's New

Native Command Queuing (NCQ) available on HP 500GB and 750GB 1.5G SATA 7.2K 3.5" HDDs

Models
NOTE: SATA Drive Write Cache is disabled by default to minimize the risk of data loss in case of power loss and cannot be enabled for SATA drives attached to all HP Smart Array controllers and HP 8 Port internal SAS/SATA HBA with RAID.
3.5" SATA Hot Plug Drives
HP 750GB 1.5G SATA 7.2K 3.5" HDD	432341-B21
HP 500GB 1.5G SATA 7.2K 3.5" HDD	395473-B21
HP 250GB 1.5G SATA 7.2K 3.5" HDD	349239-B21
HP 160GB 1.5G SATA 7.2K 3.5" HDD	349238-B21
HP 80GB 1.5G SATA 7.2K 3.5" HDD	349237-B21
3.5" SATA Non-Hot Plug Drives
500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO NOTE: Factory Integrated Only.	404469-B21
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD	411276-B21
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD	411275-B21
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD	383410-B21
Small Form Factor (SFF) SATA Hot Plug Drives
HP 120GB 1.5G SATA 5.4K SFF HDD	431786-B21

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-0612ENW.pdf.

Drive Quality	Today's entry-level servers and external storage solutions are seeing an increase in maximum storage capacity and demand for increased levels of drive quality. In the often-changing entry-level server and storage environment, storage has become a critical component of the information system, significantly defining both the systems reliability. This is why HP drives undergo an intense qualification process that eliminates firmware and O/S incompatibilities. All drives are proven to perform in the HP ProLiant and StorageWorks Modular Smart Array (MSA) storage systems for which they were designed.

Performance	Only those drives whose quality is suitable for an entry-level, external storage enclosures and server environments are selected through the HP qualification process. All our drives are proven to be reliable in the ProLiant server and MSA storage environment.

Native Command Queuing	Native Command Queuing (NCQ) is a technology designed to increase performance of SATA hard disk drives by allowing the individual hard disk to internally optimize the order in which received read and write commands are executed. This can reduce the amount of unnecessary going back-and-forth on the drive's heads, resulting in increased performance for workloads where multiple simultaneous read/write requests are outstanding, most often occurring in server or storage-type applications. Without NCQ the drive has to process and complete one command at a time. For NCQ to be enabled, it must be supported and turned on in the controller and in the hard drive itself. NOTE: Please reference the HP Smart Array Controller website for NCQ enabled controllers at: http://www.hp.com/products/smartarray. Please see SATA hard drive Technical Specifications section for specific capacities supported with NCQ.

Integration

Many issues customers have with third party Serial-ATA drives are integration related issues. When buying from another supplier, there is no guarantee that a drive has been correctly set for proper operation with ProLiant entry-level servers or MSA enclosures. These incompatibilities can create problems in configuration, can rob your system of performance, or at their worst, can result in data corruption. HP hard drives are specifically designed and tested for flawless operation in your HP equipment. The integration of hard drives in HP systems means that cables, controllers, and firmware are right for your ProLiant entry level server or MSA enclosures.

Server and Storage Support

Please see the following URL for the latest list of supported servers and enclosures:
http://www.hp.com/servers/hdd-documentation

Service and Support, HP Care Pack, and Warranty Information

HP Care Pack Information

Keeping industry standard systems truly available requires high-quality service with a single point of contact. The HP Care Pack program is tailored specifically to protect your HP ProLiant system and options. These convenient packages allow you to maximize server utilization and performance with fewer resources. Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up
Education courses
Extended onsite hardware coverage hours from Next Business Day to 24 hours a day, 7 days a week with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft and Linux-based IT solutions helping to deliver high level of application availability.
Response times range from 30 minutes for critical problems to 2 hours.
System management, performance services and Mission Critical Support Solution

HP Premium integrated hardware and software support and Mission Critical offers are available either as Care Pack offers or as tailored solutions to meet your business needs. These solutions deliver high levels of application availability. Delivered by experienced, certified engineers, these packages help you maximize server utilization and performance with fewer resources. Available as Support Plus, Support Plus 24, Proactive 24, Critical Services and Mission Critical Partnership.

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Technical Specifications

3.5" SATA Hot Plug Drives
HP 80GB 1.5G SATA 7.2K 3.5" HDD 349237-B21	80GB 7,200 rpm	Capacity	80,026 MB
		Height	1.04 in (26.4 mm)
		Width	4.36 in (110.7 mm)
		Depth	7.25 in (184.2 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	2.0 ms
			Average	<11 ms
			Full-Stroke	23.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	156,301,488
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 160GB 1.5G SATA 7.2K 3.5" HDD 349238-B21	160GB 7,200 rpm	Capacity	160,041 MB
		Height	1.04 in (26.4 mm)
		Width	4.36 in (110.7 mm)
		Depth	7.25 in (184.2 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	2.0 ms
			Average	<11 ms
			Full-Stroke	23.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	312,581,808
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 250GB 1.5G SATA 7.2K 3.5" HDD 349239-B21	250GB 7,200 rpm	Capacity	250,059 MB
		Height	1.04 in (26.4 mm)
		Width	4.36 in (110.7 mm)
		Depth	7.25 in (184.2 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	2.0 ms
			Average	11 ms
			Full-Stroke	22.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	488,397,168
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 500GB 1.5G SATA 7.2K 3.5" HDD 395473-B21	500GB 7,200 rpm	Capacity	500,107 MB
		Height	1.04 in (26.4 mm)
		Width	4.36 in (110.7 mm)
		Depth	7.25 in (184.2 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	Supported
		Seek Time (typical reads, including settling)	Single Track	1 ms
			Average	11 ms
			Full-Stroke	22.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	976,773,168
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 750GB 1.5G SATA 7.2K 3.5" HDD 432341-B21	750GB 7,200 rpm	Capacity	750,156 MB
		Height	1.04 in (26.4 mm)
		Width	4.36 in (110.7 mm)
		Depth	7.25 in (184.2 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	Supported
		Seek Time (typical reads, including settling)	Single Track	1 ms
			Average	11 ms
			Full-Stroke	22.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	1,465,149,168
		Operating Temperature	41° to 131° F (5° to 55° C)
3.5" SATA Non-Hot Plug Drives
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD 383410-B21	80GB 7,200 rpm	Capacity	80,026 MB
		Height*	1.028 in (26.1 mm)
		Width	4.00 in (101.6 mm)
		Depth*	5.787 in (147.0 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	0.9 ms
			Average	<11 ms
			Full-Stroke	17.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	156,301,488
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD 411275-B21	160GB 7,200 rpm	Capacity	160,041 MB
		Height*	1.028 in (26.1 mm)
		Width	4.00 in (101.6 mm)
		Depth*	5.787 in (147.0 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	0.9 ms
			Average	<11 ms
			Full-Stroke	17.8 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	312,581,808
		Operating Temperature	41° to 131° F (5° to 55° C)
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD 411276-B21	250GB 7,200 rpm	Capacity	250,059 MB
		Height*	1.028 in (26.1 mm)
		Width	4.00 in (101.6 mm)
		Depth*	5.787 in (147.0 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	1.0 ms
			Average	11 ms
			Full-Stroke	22.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	488,397,168
		Operating Temperature	41° to 131° F (5° to 55° C)
* Maximum drive dimension

SFF SATA Hot Plug Drives
HP 120GB 1.5G SATA 5.4K SFF HDD 431786-B21	120GB 5,400 rpm	Capacity	120,022 MB
		Height*	0.63 in (16.0 mm)
		Width	3.00 in (76.2 mm)
		Depth*	5.38 in (136.6 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	1.5 Gb/s
		Seek Time (typical reads, including settling)	Single Track	1.5 ms
			Average	12 ms
			Full-Stroke	22ms
			Rotational Speed	5400 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	234,441,648
		Operating Temperature	41° to 122° F (5° to 50° C)

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2008 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat, Inc., in the U.S. and/or other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.

DA-11940 18 - Version 18 - July 15, 2008