Five total slots available: four 64-bit/33MHz PCI,
one 32-bit/33MHz PCI
Compaq NC3163 Fast Ethernet NIC (embedded) PCI 10/100
WOL (Wake On LAN)
Integrated Dual Channel Ultra ATA/100 Adapter with
Integrated ATA RAID 0, 1, & 1+ 0 (ATA Models) or Integrated Dual
Channel Wide Ultra3 SCSI Adapter (SCSI Models)
Support for up to five 1" Wide Ultra3 NHP SCSI
hard drives or four 1" ATA NHP Drives (depending on Model)
Internal storage capacity of up to 402.8 GB (3 x
36.4-GB non-hot-plug + 2 x 146.8-GB hot plug 1" HD) (SCSI Models)
with optional Drive Cage
Internal storage capacity of up to 320 GB (4 x 80-GB
1" ATA/100 drives) (ATA Models)
Integrated ATI Rage XL with 8MB SDRAM video
300W Power Supply
Compaq Insight Manager, SmartStart and Automatic
Server Recovery-2 (ASR-2)
Protected by HP Services, including a one-year, limited
warranty, Next Business Day 1 year on-site limited Global warranty and
Pre-Failure Warranty, which covers processors, memory, and hard drives
— Certain restrictions and exclusions apply. Consult the HP Customer
Support Center at 1-800-345-1518 for details.
Insight Manager 7
helps maximize system uptime and performance and reduces the cost of maintaining
the IT infrastructure by providing proactive notification of problems before those
problems result in costly downtime and reduced productivity. Insight Manager 7
is easy to set up and provides rapid access to detailed fault and performance
information gathered by the Management Agents. One-click-access to the Remote
Insight Lights Out Edition board allows systems administrators to take full graphical
control of ProLiant servers in remote locations or lights-out data centers. Finally,
Insight Manager 7 in concert with the Version Control Agents and Version Control
Repository Manager enables systems administrators to version manage and update
system software across groups of Compaq ProLiant servers.
Management Agents
The
Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into
HP servers, workstations, desktops, and portables, and send alerts to Insight
Manager 7 and other enterprise management applications in case of subsystem or
environmental failures. For additional information about the Management Agents
and other management products from HP, please visit the management Web site at
http://www.hp.com/servers/manage.
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at http://www.hp.com/servers/smartstart. SmartStart version supported (minimum): SmartStart
5.20
ActiveUpdate
ActiveUpdate
is a web-based application that keeps IT managers directly connected to HP for
proactive notification and delivery of the latest software updates.
ROMPaq, support software, and
configuration utilities
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options.
Survey
Utility and diagnostics utilities
The
most advanced configuration analysis, reporting and troubleshooting utilities
used by Compaq and at your fingertips.
Optional
Proliant Essentials Value Packs
Optional
software offerings that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack
– an automated solution for multi-server deployment and provisioning, enabling
companies to quickly and easily adapt to changing business demands.
Workload
Management Pack – provides easier management of complex environments, improving
overall server utilization and enabling Windows 2000 customers for the first time
to confidently deploy multiple applications on a single multiprocessor ProLiant
Server.
Recovery Server Option Pack – entry-level high availability
software that will provide reliable protection and increased uptime against server
hardware and operating system failures.
Performance Management Pack
– a performance management solution that identifies and explains hardware
performance bottlenecks on ProLiant servers and attached options enabling users
to better utilize their valuable resources..
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
Industry Standard
Compliance
ACPI V1.0b Compliant
PCI 2. 2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
Manageability
Insight Manager 7
Redundant ROM
Remote Flash ROM
Automatic Server Recovery-2 (ASR-2)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and hard drives
Security
Power-on password
Setup password
Diskette boot control
Power switch security
Intruder Alert Message
Server Power Cords
One Lowline power cord ships
standard
Power Supply
300 Watts, PFC (Power Factor
Correcting)
System Fans
1 non-hot plug; non-redundant
fan shipped standard. 1 fan total supported.
Microsoft Windows NT®
Server 4.0 and Microsoft Windows NT Server 4.0 Terminal Server Edition Microsoft
BackOffice Small Business Server 2000 Microsoft Windows 2000 Server Novell
NetWare 5.1 Novell NetWare Small Business Suite 5.1 Novell Netware 6 LINUX
(Red Hat, SuSE, Caldera eServer) (SCSI Models only)
Rack
9000 and 10000 series Cabinets The increasing power of new high-performance
processor technology requires increased cooling efficiency for rack-mounted servers.
The Compaq 9000 Series Rack and the 10000 Series Racks provides enhanced airflow
for maximum cooling, allowing these racks to be fully loaded with servers using
the latest processors.
Rack 7000 series Cabinets When installing
a server with processors running at speeds of 550 MHz or greater in Compaq Rack
7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the
new processor technology requires the installation of Compaq's new High Airflow
Rack Door Inserts ( 327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U))
to promote enhanced airflow for maximum cooling.
CAUTION:
If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server
rack includes closing front and rear doors, you must allow 830 square inches (5,350
sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 2.75 inches (7 cm).
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces
in the rack. This arrangement ensures proper airflow. Using a rack without blanking
panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide
or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantml330/index.html.
Service
and Support
HP Services provides
a one-year, limited warranty, including Pre-Failure Warranty (coverage of hard
drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. HP technical assistance is available 7x24, toll free in
the United States and Canada. Telephone support services may be covered under
warranty or available for an additional fee.
NOTE:
Limited Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support.
A full range of HP Care
Pack packaged hardware and software services:
Installation and start
up
Extended coverage hours and enhanced response times
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials
Software, please see the following URL: http://www.hp.com/servers/proliantessentials.
Software
HP digital asset protection
302316-001
Red Hat Linux Advanced Server
2.1 Basic (English)
311811-B21
Red Hat Linux 8.0 Professional
(English)
311813-001
NetServer to ProLiant
integrations services
HP NetServer to ProLiant
integration and assessment service
304164-002
NOTE:
HP identifies current levels of NetServer support, services, and management.
This service helps maximize customer’s ability to add ProLiant platforms
into their current environment.
HP TopTools to Insight
Manager 7 installation and startup service
304163-002
NOTE: Provides on-site
review, installation and configuration services for Insight Manager 7. HP
will also re-create, as closely as possible, the views and reports from
the customer’s current TopTools configuration. This service assures a smooth
transition to the ProLiant Essentials software.
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
304162-002
NOTE: Install and configure
Rapid Deployment Pack in a test environment, then deploy a server image
to a maximum of 250 systems in the production environment. This service
helps to assure successful system deployment.
Processors
Pentium III P1400-512
KB Processor Option Kit NOTE: The Pentium III P1400-512K
Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2),
ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
Pentium III P1266-512KB
Processor Option Kit NOTE: The Pentium III P1266-512K
Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2),
ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
Pentium III P1133-512KB
Processor Option Kit NOTE: The Pentium III P1133-512K
Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2),
ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates.
NOTE: To run
any external SCSI-based devices, the customer needs to purchase an Internal to
External Cable Option kit for SCSI models or a SCSI controller for ATA Models.
IDE Tape Drives should be connected to the IDE ports on the Mother Board not the
Server Feature Board. NOTE: The SCSI Cable Kit (PN 273463-B21) is required
when installing an internal tape drive and a SCSI Controller.
NOTE:
The 3U Rackmount Kit (PN 274338-B21) can support up to (2) full-height or
(4) half-height tape drives and compatible with multiple Single-Ended and LVD
SCSI Tape Drives including the 12/24-GB DAT, 20/40-GB DAT, 20/40-GB DAT DDS-4
8 Cassette Autoloader, AIT 35-GB LVD, AIT 50 GB, 20/40-GB DLT, 40/80-GB DLT, and
the SDLT 110/220-GB Tape Drives.
5U
Rackmount Kit
274339-B21
NOTE: The 5U
Rackmount Kit (PN 274339-B21) can support up to (4) full-height tape drives and
is compatible with all Compaq DLT/SDLT tape drives including the 20/40-GB DLT,
35/70-GB DLT, 40/80-GB DLT, and the SDLT 110/220-GB tape drives.
NOTE:
To run any external SCSI-based devices, the customer needs to purchase an
Internal to External Cable Option kit for SCSI models or a SCSI controller for
ATA Models.
StorageWorks
Enclosure Model 4314T (tower)
190210-001
StorageWorks
Enclosure Model 4314T (tower) (Int'l)
190210-B31
StorageWorks
Enclosure Model 4314T (tower) (Japan)
190210-291
StorageWorks
Enclosure Model 4314R (rack-mountable)
NOTE:
This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements. This model may also be used with the
high volt UPSs R3000 XR and R6000 For North America, need to order cable
PN 340653-001.
NOTE: This kit
allows you to mount the Modular PDUs in racks other than the 9000/10000
Series racks (any racks using the standard 19" rail). For more details
please refer the Modular PDU QuickSpecs.
4.5' IEC C 13 to IEC C14 PDU Jumper
Cable (1 per pack)
142257-006
4.5' IEC C 13 to IEC C14 PDU Jumper Cable (15 per pack)
142257-007
Rack Enabling Kit
ProLiant ML310/ML330
G2 Rack Enabling Kit
238547-B22
NOTE: Support
for racks with round or square mounting holes (including all Compaq and HP
Rack System /E and HP Systems), with an adjustment range of 24" –
36".
Other
ProLiant
ML310/ML330 G2 SCSI Cable Kit NOTE: This
SCSI Cable Kit (PN 273463-B21) is required when installing an internal tape drive
and a SCSI Controller.
273463-B21
ProLiant
ML330/ML350 Internal to External SCSI Cable Option Kit
159547-B22
DL360
G2 Telco Rack Option Kit NOTE: Support
for all 2-post Telco racks requires the use of the standard four post rack
kit and an additional option kit from HP.
251243-B21
USB Options
USB Easy Access Keyboard
(Carbonite/Silver)
DC168B#
USB Easy Access Keyboard
(Carbonite) Country Key Code
NOTE:
-B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) -B23 (crated) used for air shipments of empty racks
NOTE:
–B21 (pallet) used to ship empty racks shipped on a truck –B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) –B23 (crated) used for air shipments of empty racks
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U
height together. Kit contents include hardware for connecting racks and a panel
to cover the 100mm gap at the rear of the two racks.
9000/10000 Series Offset Baying
Kit NOTE: This kit can be used to connect
9000 and 10000 series racks of the same U height together. Kit contents
include hardware for connecting racks and a panel to cover the 100 mm gap
at the rear of the two racks.
1U Rack Keyboard & Drawer
(Carbon) NOTE: The 1U Rack Keyboard &
Drawer (PN 257054-xx1) is to be used with the
Keyboards for Racks with Trackball (PN 158649-xxx).
Input Device Adjustable Rails NOTE: Input Device Adjustable Rails
(287139-B21) are for use ONLY with the TFT5110R, TFT5600RKM and integrated
keyboard/drawer which is used in mounting into third party racks.
287139-B21
Input Device Telco Rail NOTE: Input Device Telco Rails ( 287138-B21)
are for use ONLY with the TFT5110R, TFT5600RKM and integrated keyboard/drawer
which is used in mounting into third party racks.
Service
and Support Offerings (HP Care Pack Services)
Hardware
Services 4-Hour On-site Service
9
x 5 Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-EL4HR-36
9
x 5 Coverage, 3 Years (6-3 Part Number for U.S.)
162676-002
9
x 5 Coverage, 3 Years (6-3 Part Number for EMEA)
324416-022
24
x 7 Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-EL724-36
24
x 7 Coverage, 3 Years (6-3 Part Number for U.S.)
162675-002
24
x 7 Coverage, 3 Years (6-3 Part Number for EMEA)
376910-022
Hardware
Services Next Business Day On-Site Service
9
x 5 Next Business Day Coverage, 3 Years (2-5-2 Part Number for Canada)
FP-ELXHW-36
9
x 5 Next Business Day Coverage, 3 Years (6-3 Part Number for U.S.)
102407-002
9
x 5 Next Business Day Coverage, 3 Years (6-3 Part Number for EMEA)
206947-022
Installation
& Start-up Services
Hardware
Installation (2-5-2 Part Number for Canada)
FP-ELINS-IN
Hardware
Installation (6-3 Part Number for US)
401791-002
Server
Installation and Set-Up (Installation of the server, installation of the appropriate
service tools, check to ensure device SW and firmware is loaded and installation
of the operating system software (6-3 Part Number for EMEA)
204563-022
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Win NT Operating System
plus up to 1 day start-up activity, configure print & network access services,
and orientation (6-3 Part Number for U.S.)
240013-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Win NT Operating System
plus up to 1 day start-up activity, configure print & network access services,
and orientation (2-5-2 Part Number for Canada)
FM-MSTEC-01
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Novell NetWare Operating
System plus up to 1 day start-up activity, configure print & network access
services, and orientation (6-3 Part Number for U.S.)
240008-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to
server at same time of server installation; assemble & test; basic user information
provided; Install & configure basic functionality of Novell NetWare Operating
System plus up to 1 day start-up activity, configure print & network access
services, and orientation (2-5-2 Part Number for Canada)
FM-NSTEC-01
HP
Care Pack Priority Services for ProLiant Servers – Priority Level
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239928-002
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Novell NetWare Operating System, Next Available Specialist (6-3
Part Number for U.S.)
239968-002
9 x 5 HW, 4-hr response, Next
Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for Windows
NT, Windows 2000, Professional, Server or Advanced Server Operating System, Next
Available Specialist (2-5-2 Part Number for Canada)
FM-M01E1-36
9
x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Novell NetWare Operating System, Next Available Specialist (2-5-2
Part Number for Canada)
FM-N01E1-36
9 x 5 4-hour H/W, 5 x 9 2-hour
O/S (NT & NetWare), Three Years (6-3 Part Number for EMEA)
179834-022
HP
Care Pack Priority Services for ProLiant Servers – Priority 24 Level
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239930-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Novell NetWare Operating System, Next Available Specialist (6-3
Part Number for U.S.)
239970-002
7 x 24 4-hour H/W, 7 x 24 2-hour
O/S (NT & NetWare), Three years (6-3 Part Number for EMEA)
179839-022
CarePaq
Priority Services for ProLiant Servers - Priority Silver
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System, Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (6-3 Part Number for U.S.)
239932-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System (6-3 Part Number for U.S.)
239934-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Novell NetWare Operating System, Technical Account Manager, Technical
Newsletter, SW activity review (6-3 Part Number for U.S.)
239972-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Novell NetWare Operating System (6-3 Part Number for U.S.)
239974-002
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System, Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (2-5-2 Part Number for Canada)
FM-M04E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System (2-5-2 Part Number for Canada)
FM-M24E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Novell NetWare Operating System, Technical Account Manager, Technical
Newsletter, SW activity review (2-5-2 Part Number for Canada)
FM-N04E1-36
24
x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Subsequent System Support
for Novell NetWare Operating System (2-5-2 Part Number for Canada)
Up to 3200-MB memory is available with the optional
installation of PC133-MHz Registered ECC SDRAM DIMM memory kits.
Standard Memory Replaced with Optional Memory
Up to 4096-MB memory is available with the removal of
the standard 128-MB of memory and the optional installation of PC133-MHz
Registered ECC SDRAM DIMM memory kits.
NOTE: Charts do not represent all possible
memory configurations.
Memory
Slot
1
2
3
4
Standard
128 MB
128 MB
Empty
Empty
Empty
Optional
3200 MB
128 MB
1024 MB
1024 MB
1024 MB
Maximum
4096 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
NOTE:
All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to
support U320 transfer rates.
Smart Array 532 Controller (used
as Host Bus Adapter)
Please see the Modular Smart Array 500 QuickSpecs for the latest list of
supported HBAs: http://www.hp.com/go/msa500
Modular Smart Array 1000
Please see the Modular
Smart Array 1000 QuickSpecs below to determine configuration requirements
External
Please see the Modular Smart Array
1000 QuickSpecs (URL below) for the latest list of supported HBAs
NOTE: Support
for either two internal, two external, or a mix of internal/external is
available. This is achieved using an internal to external SCSI cable option
kit (PN 159547-B22) and SCSI knockout.
Power Supply Output
Power (per power supply)
Rated Steady-State Power
300W
Maximum Peak Power
400W
Temperature Range
Operating
50° to 93° F (10°
to 35° C)
Shipping
-40° to 150° F (-40°
to 66° C)
Relative Humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
5.3
L pAm (dBA)
45
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
5.3
L pAm (dBA)
45
1.44-MB Diskette Drive
Diskette Size
3.5 in (8.89 cm)
LED Indicators (front panel)
Green
Read/Write Capacity per Diskette (high/low density)
US Site
DL Quickspecs
Search:
327281-B21
© 2012 Canada PartsDirect