SAS Model: HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller NOTE: When using the SC40Ge
with SATA Hard Drives, 1.5G SATA Hard Drives are required.
Performance Model: HP Smart Array E200/128 BBWC SATA/SAS Controller
Internal Drive Support:
Internal SAS storage capacity of up to 8.0TB (8 x 1TB SAS drives)
Internal SATA storage capacity of up to 8.0TB (8 x 1TB SATA drives)
Supports up to Eight (8) SAS/SATA hard drives via HBA or RAID Controller
Network Controller:
Embedded HP NC105i PCI Express Gigabit Server Adapter
Expansion Slots:
Six expansion slots: Two (2) PCI-Express x8, Three (3) PCI-Express
x4(x8 connector) and One (1) PCI (32-bit/33MHz). One slot designated
for optional HP ProLiant 100 G5 Lights-Out 100c Remote Management
Card
USB Ports:
Eight (8) USB 2.0 ports:- 4 rear, 2 front, 2 Internal(1 standard
and 1HP 5-pin)
Power Supply:
One 650W Single Non-Redundant Power Supply
750W Redundant Power Supply(Optional)
Form Factor:
5U Tower Models. Rack models optional HP Tower to Rack Conversion
Tray, Universal Kit
Management:
Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
Deployment/Serviceability:
Easy chassis entry and component access
Customer Self Repair (CSR): HP products are designed with many CSR
parts to minimize repair time and allow for greater flexibility in
performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair is available for one year from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services
are available through HP Care Pack services or customized service
agreements. SATA hard drives have a one year warranty. NOTE: Server Warranty includes
1 year Parts, 1 year Labor, 1-year on-site support with next business
day response. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a Mandatory
CSR part; 2) Optional CSR parts are also designed for easy replacement
but may involve added complexity. Customers may choose to have HP
replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Integrated 1 x 6 MB
level 2 cache (E5200 sequence)
Integrated
2 x 6 MB level 2 cache (E5400 sequence)
Upgradeability
Upgradeable to two processors
(Dual or Quad-Core)
NOTE: Please
contact your regional sales support
NOTE: Future
upgradeable to Xeon® Series 5400/5300 Quad-Core processors (Please contact
your regional sales support to determine quad core upgradeability. Some
of the earlier shipping models may not support this upgrade). 5100 Dual-Core
models are not upgradeable to the 5200 Dual-Core processors.
Chipset
Intel® 5100 Chipset
Memory
Type
PC2-5300 Registered Buffered
DIMMs (DDR2-667)
Standard for NHP SATA Models
1 GB
Standard for HP SAS/SATA Model
and Performance Model
2 GB
Maximum
16 GB
Network Controller
Embedded HP NC105i PCI Express
Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN)
Expansion Slots #
Technology
Bus Width
Connector Width
Bus Number*
Form Factor
Notes
1
32-bit/33MHz PCI
N/A
N/A
0x0A
Full length, full height slot
Non Hot-plug
2
PCI-Express (Gen 1)
x4
X8
0x03
Full length, full height slot
Non Hot-plug
3
PCI-Express (Gen 1)
X4
X8
0x05
Full length, full height slot
Non Hot-plug
4
PCI-Express (Gen 1)
X4
X8
0x01
Full length, full height slot
Non Hot-plug
5
PC-Express (Gen 1)
X8
X8
0x02
Full length, full height slot
Non Hot-plug
6
PCI-Express (Gen 1)
X8
X8
0x09
Full length, full height slot
Non Hot-plug
Storage Controller
SATA/SAS Model
HP Embedded SATA RAID Controller
HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller NOTE: When using the SC40Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required.
Performance Model
HP Smart Array E200/128 BBWC
SATA/SAS Controller
Storage
Diskette Drive
None ship standard
1.44 MB USB Diskette Drive Option available
Optical Drive
HP Half-Height SATA DVD-ROM
Optical Drive
Hard Drives
None ship standard
SAS and SATA hard drive options are available
One 160GB Non-Hot Plug HDD for Non-Hot Plug BTO models
Maximum
Internal Storage
SATA
8.0TB
(8 x 1TB) SATA (With optional SAS controller)
SAS
8.0TB
(8 x 1TB) SAS (With optional SAS controllers)
NOTE:
The Embedded SATA RAID controller support for a single logical drive is limited
to 2TB.
1 (10/100 via optional HP ProLiant
100 G5 Lights-Out 100c Remote Management Card
Graphics
32MB
shared supporting 1600x1200x16M resolution
Form Factor
Tower (5U) NOTE: Rack mounting available via
HP Tower to Rack Conversion Tray, Universal Kit. Please see the options
section in this QuickSpecs.
Industry Standard
Compliance
ACPI V2.0 compliant
PCI 2.3 compliant
PXE Support
WOL Support
Microsoft® Logo certifications
Manageability
Optional HP ProLiant 100 G5
Lights-Out 100c Remote Management Card
Embedded IPMI standard reporting
Security
Power-on password
Setup password
Diskette boot control
Server Power Cords
One Lowline NEMA power cord
Power Supply
One 650W Non-Redundant Power
Supply, Non-hot plug
750W Redundant Power Supply
(Optional)
System Fans
Two (2) – Non-hot plug,
Non-redundant system fans
Remote
Management
Lights-Out
100c
Lights Out LO100c is a
Remote Management Card (RMC) for HP ProLiant 100 series servers that do not have
embedded LO100i. The LO100c has all the features of the LO100i Advanced license
and allows customers, or their service providers, to remotely manage HP ProLiant
servers over a LAN or the Internet from anywhere, anytime regardless whether the
server is located in the same building, across town, or around the globe.
With LO100c, users can acquire complete remote control with Virtual KVM (graphical
hardware-based, remote console). Users can also access the server's serial console,
control system power, update system firmware and software, as well as monitor
system environmental conditions. The LO100c remote management card can be accessed
from a web browser or command line interface. This virtual "at-the-server"
functionality means administrators stay in control of remote HP ProLiant 100 series
servers.
The HP Lights-Out100c consists of a management processor and
firmware that provides cost-effective, entry-level lights-out functionality, basic
system board management functions, and diagnostics.
NOTE: For more
information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/ML150G5
NOTE: Netware
6.5 is supported with the non-RAID mode embedded SATA controller. For driver
support in RAID mode with Netware 6.5, the Smart Array E200 Controller (P/N
411508-B21) or HP SC44Ge SAS PCI-E Host Bus Adapter (P/N 416096-B21) must
be purchased.
Factory
Express Portfolio for Servers and Storage
HP
Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory Express
offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such
as image loading, asset tagging and custom packaging to meet customer needs. HP
products supported through Factory Express include a wide array of servers and
storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express
services on your specific server model please contact your sales representative
or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure Enterprise Configurator now provides factory default
racking for our HP hardware portfolio. This approach is aligned with our
strategic direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
Service
and Support
HP
Care Pack Services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP
Care Pack services include coverage for the HP branded hardware options qualified
for the server that are purchased at the same time or afterward and internal to
the enclosure. It also includes the 22" and smaller external monitors and
tower UPS options up to 3kVA. These items will be covered at the same service
level and for the same coverage period as the server. Coverage of UPS Battery
is not included and standard warranty terms & conditions apply. For servers
or storage systems installed within a rack, service also covers all HP qualified
rack options installed within the same rack.
To fully capitalize
on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry
leader in provision of multi vender support solutions provides a range of support
services designed to meet the varying needs of business. Whether an SMB or large
global corporation HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service – Simplify
ProLiant solution implementation, maintenance and management.
Support
Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays
only
Deployment Service – Hardware Installation only
Enhanced
Service – Optimize service level to increase IT performance and availability
Support Service – 3 Year 13x5 Same Business Day, 4-Hour
response coverage
Deployment Service – Installation and Start-up
only
Installation & Start-Up of a ProLiant server and Microsoft
or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on
a scheduled basis 8am-5pm, M-F, excl. HP holidays.
Embedded HP NC105i
PCI Express Gigabit Server Adapter 10/100/1000 WOL
Storage
Controller
HP Embedded SATA
RAID Controller
Hard
Drive
One 160GB Non-Hot
Plug HDD
Internal
Storage
SATA: 4.0TB (4 x 1 TB) NOTE: A Hot-plug hard drive cage
can be installed into a Non-hot plug server by ordering a HBA (or Smart
Attay) plus one HP 2nd LFF Hot-plug hard drive cage kit.
Optical
Drive
HP Half-Height SATA
DVD-ROM Optical Drive
Form
Factor
Tower standard; 5U
rack via optional rack mounting kit
NOTE:
This section lists some of the steps required to configure a Factory Integrated
Model. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional
information.
The ProLiant
Smart Buy program offers a collection of promotional server and option products
that are configured with SMB in mind, offered at discounted prices, and
positioned for quick delivery. Smart Buy server offers are available for
a limited time only.
NOTE: This section lists some of the
steps required to configure a Factory Integrated Model. To ensure only
valid configurations are ordered, HP recommends the use of an HP approved
configurator. Contact your local sales representative for information
on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis.
Step
1: Base Configuration (Select only one model from the following selections)
Models
HP ProLiant ML150 G5 Non-hot Plug
SATA CTO Chassis
450290-B21
Factory Integrated Models ship
with:
Embedded HP NC105i PCI Express
Gigabit Server Adapter 10/100/1000 WOL
Tower 5U Form Factor
HP ProLiant ML150 G5 Hot Plug
SAS/SATA CTO Chassis
450291-B21
Factory Integrated Models ship
with:
Embedded HP NC105i PCI Express
Gigabit Server Adapter 10/100/1000 WOL
Tower 5U Form Factor
Step
2: Choose Required Options (Select only one option from each category
unless otherwise noted)
NOTE: Required
only if P/N 450290-B21 is selected in Step 1 above. NOTE: the components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down
to an acceptable level for all components.
NOTE: If a Non-Hot
Plug CTO Chassis (450290-B21) is selected in Step 1 and SAS Non-Hot- Plug
drives are selected, a SAS Array Controller must also be selected.
Storage Controllers (NOTE:
Only required if 450291-B21 is selected in Step 1)
NOTE: If one
of the following Smart Array Controller or SAS HBA is selected; the HP Internal
SAS/SATA 4-Port Cable (P/N 457692-B21) is also required.
HP SC40Ge SAS HBA, FIO NOTE: RAID 0,1. NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required.
449176-B21
HP SC44Ge SAS PCI-E Host Bus Adapter NOTE: RAID 0,1. NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: The previous
generation of 1.5G SATA Non-Hot Plug hard drives are supported. These drives
can be purchased as an option, however, are no longer configurable. NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs
for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
NOTE: SAS hard
drives require a SAS HBA or Smart Array Controller.
NOTE: SAS non-hot
plug drives will also require the HP Internal SAS/SATA 4-Port cable (P/N
457692-B21) NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs
for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
Communications
HP NC110T PCI Express Gigabit
Server Adapter
434905-B21
HP NC360T PCI Express Dual Port
Gigabit Server Adapter
HP Internal SAS/SATA 4-Port Cable NOTE: This cable is required when
adding either the HP SC44Ge HBA (P/N 416096-B21) or the HP Smart Array E200
(P/N 411508-B21) on Non-Hot Plug SATA server models.
457692-B21
SAS HBA
HP SC44Ge SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Rack Kits
HP Tower to Rack Conversion Tray,
Universal Kit
417705-B21
USB Options
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver)
NOTE: For the
installation of Windows and other OS's, a floppy drive or the HP USB Floppy
Drive Key may be required to complete driver installation. A standard USB
drive key may not work to complete driver installation
Service
and Support Offerings (HP Care Pack Services)
Support
Service
Next Business Day On-Site Service,
9-Hour x 5-Day Coverage, 3 Years, Electronic
U8184E
Same
Business Date On-Site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic
NOTE: Memory configurations listed do
not apply to "Factory Integrated Models".
HP ProLiant ML150 Generation 5 Server
DIMM Installation Guidelines: NOTE: Charts do not represent all
possible memory configurations. Memory must be populated in one of the
following ways:
1. Slot 1 only; slots 1 and 2 only (pairs must
be of the same size)
2. Slots 1, 2, 3, 4, 5 ,and 6 (pairs must be of the same size and in the
example below with slots 1 and 2 the same and slots 2 and 3 the same,
and slots 5 and 6 the same)
3. Dual rank DIMMs can only be supported in slots 1 and 2.
Standard Memory
All HP ML150 G5 models ship with PC2-5300 Registered DIMMs (DDR2-667)
Hot Plug SAS/SATA (performance and/or base) models include 2 x 1 GB DIMMs
(2 GB total)
Non-Hot Plug SATA models include two 512 MB DIMMs (1 GB total)
Factory Integrated Models include the memory capacity of your choice.
Standard Memory Replaced with Optional Memory
Up to 16 GB of memory is available with the removal of the standard 1
GB of memory and the optional installation of PC2-5300 Registered DIMMs
(DDR2-667) Memory kits.
Dual Rank Memory Options
Memory
Slot
1A
2A
3B
4B
5C
6C
DR
DR
DR
DR
DR
DR
Standard
2 GB
1 GB
1 GB
Empty
Empty
Empty
Empty
Optional
10 GB
1 GB
1 GB
2 GB
2 GB
2 GB
2 GB
Maximum
16 GB
4 GB
4 GB
2 GB
2 GB
2 GB
2 GB
Dual Rank & Single Rank Memory
Options
Memory
Slot
1A
(Dual/Single Rank)
2A
(Dual/Single Rank)
3B
(Dual/Single Rank)
4B
(Dual/Single Rank)
5C
(Single Rank)
6C
(Single Rank)
DR
DR
DR
DR
SR
SR
DR
DR
SR
SR
SR
SR
DR
DR
DR
DR
Standard
1 GB
512 MB
512 MB
Empty
Empty
Empty
Empty
Optional
9 GB
512 MB
512 MB
2 GB
2 GB
2 GB
2 GB
Maximum
16 GB
4 GB
4 GB
2 GB
2 GB
2 GB
2 GB
NOTE: Please ensure
socket 1 is populated, otherwise the system will not boot. Install memory
in balanced pairs (see memory options) for best performance.
Four/Eight
Hot Plug SAS/SATA or Four Non-Hot Plug SATA Drive Bays
Drive
Support
Quantity Supported
Position Supported
Controller
Removable Media
SATA DVD-ROM Drive
Up
to 1
1
SATA
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components.
SAS Hot Plug 3.5"
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
450GB 3G SAS 15K
400GB 3G SAS 10K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
Up to 8
5
(Drive slots 1-8)
LSI SATA/SAS SC40Ge PCI Express
to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SAS Non-Hot Plug 3.5"
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
400GB 3G SAS 10K
450GB 3G SAS 15K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
Up to 8
5
(Drive slots 1-8)
LSI SATA/SAS SC40Ge PCI Express
to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SAS Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SAS 7.2K
750GB 3G SAS 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SATA Hot Plug 3.5"
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SATA 7.2K
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required.
SATA Hot Plug 3.5"
Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
SATA Non-Hot Plug
3.5" Midline (MDL)
Quantity
Supported
Position
Supported
Controller
750GB 3G SATA15K
500GB 3G SATA 15K
250GB 3G SATA 15K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
SATA Non-Hot Plug
3.5" Entry (ETY)
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 15K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
3.5" SATA Non-Hot
Plug Drives
Quantity
Supported
Position
Supported
Controller
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required.
3.5" SATA Hot
Plug Drives
Quantity
Supported
Position
Supported
Controller
750GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller
(for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE:
To support 8 drives, the purchase of the optional HP HDD cage and possibly
purchase a second SATA/SAS controller for 8 port support are required.
Maximum
Storage Capacity– SAS Models
Internal
8.0TB (8 x 1TB SAS hard drives)
Total
8.0TB (8 x 1TB SAS
hard drives)
Maximum Storage
Capacity– SATA Models
Internal
8.0TB (8 x 1TB SATA
drives)
Total
8.0TB (8 x 1TB SATA
drives)
Tape and Disk-Based Backup
NOTE: Installation
of SCSI tape drives in a ML150 G5 model requires SCSI controller kit (PN:
412911-B21). NOTE: For a complete listing of compatible tape and disk-based backup
offerings, please visit: http://www.hp.com/go/connect.
Position
Supported
Controller
Controller/HBA Option Kit Part Number
Internal USB Tape Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
2
USB 2.0 port
N/A
External USB Tape Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
50° to 93° F (10°
to 35° C) at sea level with an altitude derating of 1.8°F per 1,000
ft (1.0° C per every 305 m) above seal level to a maximum of 10,000
ft (3050 m) no direct sustained sunlight . Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the type and number of
options installed. System performance may be reduced if operating with a
fan fault or above 86°F (30°C).
Non-Operating
-40° to 140° F (-30°
to 60° C)
Relative Humidity
(non-condensing)
Operating
10% to 90% relative humidity (Rh),
101.7°F (38.7°C) maximum we bulb temperature, non-condensing
Non-operating**
10% to 95% relative humidity (Rh),
101.7°F (38.7°C) maximum wet bulb temperature, non-condensing.
Altitude
Operating
10,000 ft (3000m). Maximum allowable
altitude change rate is 1°C per 300m
Non-Operating
30,000 ft (9144m). Maximum allowable
altitude change rate is 1°C per 300m
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWad) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 9ECMA 109).
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
5.27 B
L-pAm
36.5 dBA
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
5.30 B
L WAd (BELS)
36.9 dBA
Emissions Classification
(EMC)
FCC Rating
Class B
Normative Standards
CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
HP Half-Height SATA
DVD-ROM Optical Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
Capacity
4.7 GB (DVD-5)
8.54 GB (DVD-9)
Block Size
DVD Media
2,048 bytes
Interface
SATA
1.56Gb/s
Access Times
(typical)
Random
<140 ms
Full-Stroke
<250 ms
Data Transfer Rate
Sustained
8100 to 21600 KB/s (6X to 16X)
Cache Buffer
128 KB
Start-up Time (typical)
< 7 seconds
Stop Time
< 4 seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 113° F (5°
to 45° C)
Humidity
10% to 90%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (4.49 x 15.0
x 20.3 cm)
Weight
2.64 lb (1.2 kg)
HP 4 Internal
Port SAS Host Bus Adapter
(SAS/SATA HP Model)
(SC40Ge SATA/SAS controller)
Dimensions (excluding bracket)
6.6 x 2.5 x 0.6 in (16.8 x 6.4
x 1.6 cm)
Disk Drive and Enclosure Protocol
Support
3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
Architecture
64-bit
SAS Connectors
1 internal SFF8484 x4 Wide SAS
Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method
PCI-Express x8 - 2 GB/s maximum
bandwidth
PCI Bus Speed
PCI-Express x8
Simultaneous Drive Transfer
Ports
1 x4 Wide SAS Connectors
Port Transfer Rate
12 Gb/s per x4 Wide SAS Port (4
x 3 Gb/s)
Software upgradeable Firmware
Yes
Maximum Capacity
1.2TB (4 x 300GB)
Memory Addressing
64-bit, supporting servers memory
greater than 4 GB
Logical Drives Supported
Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 4 Drives per RAID 0
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
4-MB flashable ROM
Disk Drive and Enclosure Protocol
Support
3 Gbps SAS and 1.5 Gbps SATA
HP E200/128 BBWC
Smart Array Controller
(Performance Model)
Dimensions (excluding bracket)
6.6 x 2.5 x 0.6 in (16.8 x 6.4
x 1.6 cm)
Disk Drive and Enclosure Protocol
Support
3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
Architecture
64-bit
SAS Connectors
2 internal SFF8484 x4 Wide SAS
Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method
PCI-Express x8 - 2 GB/s maximum
bandwidth
PCI Bus Speed
PCI-Express x8
Simultaneous Drive Transfer
Ports
2 x4 Wide SAS Connectors
Port Transfer Rate
12 Gb/s per x4 Wide SAS Port (4
x 3 Gb/s)
Software upgradeable Firmware
Yes
Maximum Capacity
2.4TB (8 x 300GB)
Memory Addressing
64-bit, supporting servers memory
greater than 4 GB
Logical Drives Supported
<FILL IN>
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 5
Upgradeable Firmware
4-MB flashable ROM
Disk Drive and Enclosure Protocol
Support
3 Gbps SAS and 1.5 Gbps SATA
Embedded NC105i
PCIe Gigabit Server Adapter (Embedded)
Network Interface
Integrated 10/100/1000BASE-T
Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller
(MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method
Compliant to x1 PCIe
Specification
Network Transfer
Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45 connector
Cable Support
Performs all the physical
layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet on standard
Category 5 UTP
HP Embedded SATA
RAID Controller
Dimensions
N/A (embedded)
Disk Drive and Enclosure Protocol
Support
1.5 Gbps SATA
Architecture
64-bit
SAS Connectors
4 internal x1 SATA
connectors
Software Upgradeable Firmware
Yes
Maximum Capacity
2TB
Memory Addressing
6GB (maximum)
Logical Drives Supported
2 (maximum)
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 10
Environment-friendly Products
and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
411508-B21
© 2012 Canada PartsDirect